FS: Robispec Radiator (Massive radiator and liquid to liquid oil cooler in one) - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Sportsguy83 · 05-21-2014, 11:25 AM

I am selling the radiator only, no Sandwich plate.

The Robispec radiator is one that includes radiator and liquid to liquid oil cooler in one. Liquid to liquid is the best solution for oil cooling.

Retails for $1100 + shipping, will let it go for $600+ shipping.

This is V. 2 of this cooling solution, meaning its the latest and newest.

No pic as it is still installed in the car.

I will include the fittings for the lines BTW, just need new line on the top one (bottom one line is good) and a sandwich plate

( $129 for Mocal Non-Thermostatic BRZ/FRS Sandwhich Plate) and good to go. Since this is a liquid to liquid Oil cooler, it does NOT require a thermostatic plate, the coolant temperature will bring the oil to operating temperature.

I have had no problems with it, works ridiculously good. I've done 35 dyno passes including 6 back to back to back and not ever did I see an oil temperature over 225 F. Same thing doing log runs on the street back to back to back six times, that means not allowing air to help with cooling because it was running/stopping/running/stopping and again never more than 225 F.

I am going in a different direction with the car cooling.

Before install

Sportsguy83 · 05-21-2014, 08:02 PM

I will include the fittings for the lines BTW, just need new line on the top one (nottom one line is good) and a sandwich plate

($160 from Mocal) and good to go.

Sportsguy83 · 05-23-2014, 07:41 AM

CHEAP cooling upgrade!!

BIG radiator AND Oil cooler, for way less than $1000....

SPCorBUST · 05-24-2014, 10:07 PM

Damn, this is exactly what I am looking for, but a month from now. GLWS.

What cooling route will you be going?

Sportsguy83 · 05-24-2014, 11:06 PM

Quote:

Originally Posted by SPCorBUST

Damn, this is exactly what I am looking for, but a month from now. GLWS.

What cooling route will you be going?

Thanks. If its still available by then its yours.

Locally made Rad and homemade oil cooler.

SPCorBUST · 05-25-2014, 12:21 AM

I would happily pick this up then. I've got a clutch, driveshaft, pump, injectors, flexfuel kit, supercharger kit, pads, lines, fluids, and other things to install in the next 2-3 weeks. i'm overwhelmed until after that, but if you've still got it then consider it sold.

Sportsguy83 · 05-25-2014, 08:49 PM

Quote:

Originally Posted by SPCorBUST

I would happily pick this up then. I've got a clutch, driveshaft, pump, injectors, flexfuel kit, supercharger kit, pads, lines, fluids, and other things to install in the next 2-3 weeks. i'm overwhelmed until after that, but if you've still got it then consider it sold.

Perfect. We'll keep in touch in the next few weeks.

heeltoe86 · 05-26-2014, 10:44 AM

How much would you ship to 89146?

DatApex · 05-26-2014, 05:48 PM

In the same boat as the other guy, but subbed in case you still have this in a few weeks!

Sportsguy83 · 05-26-2014, 06:27 PM

Quote:

Originally Posted by heeltoe86

How much would you ship to 89146?

Will PM you a quote to night

Sent from my SM-N900A using Tapatalk

Brzzee · 05-26-2014, 10:26 PM

Shipping quote via PM to 75088 commercial.

Thanks for the thousands of hours u've devoted to make the FT86club the best forum on the web.

Mocal FA20 non-thermostat last price I heard was $129. If someone gets to this before me I'll PM the source that quoted me the price.

Sportsguy83 · 05-27-2014, 07:46 AM

Quote:

Originally Posted by Brzzee

Shipping quote via PM to 75088 commercial.

Thanks for the thousands of hours u've devoted to make the FT86club the best forum on the web.

Mocal FA20 non-thermostat last price I heard was $129. If someone gets to this before me I'll PM the source that quoted me the price.

Thanks for the kind words. I'm honestly just glad to help people out.

Thanks for the Non-thermo plate quoted price!

I Pm'd you a quote.

draggin_az · 05-27-2014, 11:43 AM

so all we need is a sandwich plate and a top line and it will be functioning?

Sportsguy83 · 05-27-2014, 11:54 AM

Quote:

Originally Posted by draggin_az

so all we need is a sandwich plate and a top line and it will be functioning?

Yes, Pm'd.

05-24-2014, 10:07 PM	#4
SPCorBUST Senior Member Join Date: Dec 2011 Drives: 2013 Subaru BRZ Limited Location: Orange County, CA Posts: 935 Thanks: 525 Thanked 399 Times in 255 Posts Mentioned: 23 Post(s) Tagged: 2 Thread(s)	Damn, this is exactly what I am looking for, but a month from now. GLWS. What cooling route will you be going? __________________ Setup 1: KW C38, Grams 550, Grams 265, 4bar, FlexFuel, Delicious Setup 3: JR C30, DW 700, Grams 265, 3bar, FlexFuel, Moto-East Setup 4: JR C30 HBP, DW 700, Grams 265, 3bar, FlexFuel, Church Setup 5: JR C30 HBP, DW 700, DW 300, 3bar, FlexFuel, Delicious, Built Motor Setup 6: JR C30 HBP, DW 700, DW 300, 3bar, FlexFuel, Delicious, Closed Deck Built Motor

05-26-2014, 10:44 AM	#8
heeltoe86 Member Join Date: Jul 2012 Drives: 2012 Ultramarine FR-S Location: Las Vegas, NV Posts: 85 Thanks: 84 Thanked 51 Times in 32 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	How much would you ship to 89146? __________________ 2013 Ultramarine FR-S daily/trackwhore 1986 Toyota AE86 (sold) 2007 Toyota FJ Cruiser (sold) 2006 Toyota Tacoma PreRunner (sold) 1996 Honda Civic (sold)

05-26-2014, 10:26 PM	#11
Brzzee Senior Member Join Date: Feb 2013 Drives: 2015 Subaru BRZ WRBP Limited 6MT. Location: Dallas, TX Posts: 441 Thanks: 271 Thanked 108 Times in 88 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Looking to Buy Shipping quote via PM to 75088 commercial. Thanks for the thousands of hours u've devoted to make the FT86club the best forum on the web. Mocal FA20 non-thermostat last price I heard was $129. If someone gets to this before me I'll PM the source that quoted me the price. __________________ - When men make plans the gods laugh.

05-27-2014, 11:43 AM	#13
draggin_az Small penis big dreams Join Date: Sep 2012 Drives: '13 Scion FR-S Location: Virginia Beach, VA Posts: 585 Thanks: 377 Thanked 289 Times in 147 Posts Mentioned: 10 Post(s) Tagged: 7 Thread(s)	so all we need is a sandwich plate and a top line and it will be functioning? __________________ v3 -> v2 Vortech SC / 2.87 pulley Fuel pump, FIC 770 injectors, custom header back, perrin resonated CBE 277hp 93 octane 370hp on E-85

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Robispec Radiator/Oil Cooler combo	sw20kosh	Engine, Exhaust, Transmission	86	06-16-2015 07:56 PM
Robispec radiator/oil cooler new-dyno time only	mike the snake	Engine, Exhaust, Bolt-Ons	9	02-15-2014 06:15 PM
Robispec Radiator/oil cooler NEW $800 or trade for NEW FB oil cooler kit.	mike the snake	Engine, Exhaust, Bolt-Ons	1	01-31-2014 05:46 PM
Robispec radiator/oil cooler takeoff plate O-ring	mike the snake	Engine, Exhaust, Transmission	18	12-16-2013 10:43 PM

05-25-2014, 12:21 AM	#6
SPCorBUST Senior Member Join Date: Dec 2011 Drives: 2013 Subaru BRZ Limited Location: Orange County, CA Posts: 935 Thanks: 525 Thanked 399 Times in 255 Posts Mentioned: 23 Post(s) Tagged: 2 Thread(s)	I would happily pick this up then. I've got a clutch, driveshaft, pump, injectors, flexfuel kit, supercharger kit, pads, lines, fluids, and other things to install in the next 2-3 weeks. i'm overwhelmed until after that, but if you've still got it then consider it sold.

05-26-2014, 05:48 PM	#9
DatApex Senior Member Join Date: May 2013 Drives: 2013 WRB BRZ Limited Location: IL Posts: 188 Thanks: 3 Thanked 65 Times in 46 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	In the same boat as the other guy, but subbed in case you still have this in a few weeks!

User Name		Remember Me?
Password