New SPL Front lower control arm (FLCA) discussion - Page 6 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

SuperTom · 01-02-2020, 12:06 PM

Quote:

Originally Posted by TGIRWD

Nothing major - but not necessarily the main reason for installing these.

It would be for me im trying to get more weight off the front. Plus I doubt my local hack mechanic would be able to make use of all the adjustment areas.

TGIRWD · 01-13-2020, 11:53 AM

Quote:

Originally Posted by JohnJuan

Am I reading something wrong, or does this mean a weight gain?

OEM - 2540 grams each - 5080 grams total

SPL - 2727 grams each - 5454 grams total - 374 g more than stock?

Sorry - I had that wrong and have edited the original post. OEM is 2727 with the Whiteline stuff i had in there. SPL are 2540.

new2subaru · 01-13-2020, 05:17 PM

Quote:

Originally Posted by TGIRWD

Sorry - I had that wrong and have edited the original post. OEM is 2727 with the Whiteline stuff i had in there. SPL are 2540.

Figured that. Thanks for weighing them.

Devil 86 · 01-21-2020, 10:38 AM

I have 3 seasons on my set and have had zero issues. They are amazing and super easy to adjust. Worth every penny

bradsm87 · 07-08-2022, 04:53 AM

How are the rose joints (rod ends) holding up for people who have done at least 15,000 miles with them? Any play in the joints?

I want to change the front lower arms, mostly to get the track width I want without increasing scrub radius and to be able to have even wheel fitment front to rear without using front wheel spacers which are illegal in Australia. I really hate using exposed ball joints without seals on street cars. I don't like the Cusco slotted adjustment setup so I guess I need to compromise on the exposed joints and just go for SPL.

rixter145 · 09-28-2022, 05:47 PM

subbed for details

whataboutbob · 09-28-2022, 09:31 PM

Mine are still holding up great, probably close to 30K Miles on them now.

CounterSpace Garage · 09-30-2022, 03:08 PM

Quote:

Originally Posted by whataboutbob

Mine are still holding up great, probably close to 30K Miles on them now.

This guy consistently loads up that suspension with Hoosiers without issues.

whataboutbob · 09-30-2022, 07:39 PM

Quote:

Originally Posted by CounterSpace Garage

This guy consistently loads up that suspension with Hoosiers without issues.

LOL, me? Never.

https://www.ft86club.com/forums/show...&postcount=371

https://www.ft86club.com/forums/show...&postcount=358

grippgoat · 07-15-2023, 05:44 AM

Can anyone confirm/deny whether these will work on a 22+ BRZ?

EDIT: After re-finding and re-reading that japanese article on the differences, I kinda doubt they'll work unless they updated the design for the aluminum knuckles. I've got an email out to them, but I don't expect to hear back until Monday.

EDIT2: I called SPL, and they confirmed their arms and tie rods were revised to be compatible with the 2nd gen BRZ.

CSG Mike · 07-17-2023, 05:21 PM

Service bulletin for those of you using SPL FLCA.

https://www.splparts.com/tsb-2301

Joon525 · 07-19-2023, 11:11 PM

Quote:

Originally Posted by CSG Mike

Service bulletin for those of you using SPL FLCA.

https://www.splparts.com/tsb-2301

Our cars are excluded from this.

07-15-2023, 05:44 AM	#80
grippgoat Member Join Date: Mar 2023 Drives: 2023 BRZ, 2018 Golf R 6MT Location: WA Posts: 47 Thanks: 6 Thanked 23 Times in 15 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Can anyone confirm/deny whether these will work on a 22+ BRZ? EDIT: After re-finding and re-reading that japanese article on the differences, I kinda doubt they'll work unless they updated the design for the aluminum knuckles. I've got an email out to them, but I don't expect to hear back until Monday. EDIT2: I called SPL, and they confirmed their arms and tie rods were revised to be compatible with the 2nd gen BRZ. Last edited by grippgoat; 07-17-2023 at 04:54 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Turbo Kit Sneak Peek(Ptuning)	kanundrum	Forced Induction	1046	10-26-2017 07:02 AM
Part 1 of our FR-S / BRZ Turbo Kit Sneak Peek	Rev Works	Forced Induction	64	03-12-2014 01:21 PM
A Sneaky Sneak Peak?	White64Goat	Other Vehicles & General Automotive Discussions	2	02-20-2013 04:03 PM
Sneak peek at new 57Xtreme?	vividracing	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	11	02-07-2013 02:24 PM
Sneak preview at the Motiv Concepts Exhaust	MotivConcepts	Engine, Exhaust, Transmission	36	11-21-2012 08:17 PM

01-21-2020, 10:38 AM	#74
Devil 86 Member Join Date: May 2015 Drives: Ultramarine FR-S Location: Syracuse, NY Posts: 86 Thanks: 25 Thanked 15 Times in 12 Posts Mentioned: 2 Post(s) Tagged: 1 Thread(s)	I have 3 seasons on my set and have had zero issues. They are amazing and super easy to adjust. Worth every penny

07-08-2022, 04:53 AM	#75
bradsm87 Senior Member Join Date: May 2016 Drives: It has 4 wheels Location: Australia Posts: 101 Thanks: 17 Thanked 32 Times in 23 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	How are the rose joints (rod ends) holding up for people who have done at least 15,000 miles with them? Any play in the joints? I want to change the front lower arms, mostly to get the track width I want without increasing scrub radius and to be able to have even wheel fitment front to rear without using front wheel spacers which are illegal in Australia. I really hate using exposed ball joints without seals on street cars. I don't like the Cusco slotted adjustment setup so I guess I need to compromise on the exposed joints and just go for SPL.

09-28-2022, 05:47 PM	#76
rixter145 Sleep Chomper Join Date: May 2014 Drives: BRZ Location: Mill Creek Posts: 312 Thanks: 258 Thanked 98 Times in 66 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	subbed for details

07-17-2023, 05:21 PM	#81
CSG Mike Join Date: Jul 2012 Drives: S2000 CR Location: Orange County Posts: 14,530 Thanks: 8,918 Thanked 14,175 Times in 6,834 Posts Mentioned: 966 Post(s) Tagged: 14 Thread(s)	Service bulletin for those of you using SPL FLCA. https://www.splparts.com/tsb-2301

User Name		Remember Me?
Password