Greddy Supreme Sp Exhaust

[yomny]

Any more installed pics or sound updates on this exhaust. Seems to be pretty similar to the Q300 but louder. Does it drone at any given RPM, I'd appreciate your feedback as im trying to choose between this and the Dezod system. Thanks


PS- For those who have installed the exhaust, can you please share your pics.. this way we could get a better idea as to how it sits, looks.. feels. Thanks

[1future]

Need more sound clips and pictures. Having a hard time between this and the Comfort Sports GTS...

[JackieMoon86]

I've had this exhaust for quite some time now, and I love it. I was debating between this and the Invidia Q300, and after watching numerous youtube vids, I felt that the Q300 was a bit too quiet for my taste as I wanted something a bit louder than the Q300. As in any exhaust, its quite loud during cold starts, but settles down nicely when its warm. There is no drone whatsoever and you can have normal conversation in the cabin without shouting.

[1future]

Thanks for sharing @JackieMoon86
Are you able to hear the exhaust note during light acceleration (2nd gear 2.5-5k rpm pull) with the windows rolled up?

[JackieMoon86]

Originally Posted by 1future

Thanks for sharing @JackieMoon86
Are you able to hear the exhaust note during light acceleration (2nd gear 2.5-5k rpm pull) with the windows rolled up?

Yes, you'll still definitely be able to hear the exhaust. It has a nice roar/rumble, it gets to the point where I have to watch my RPMS and speed sometimes. lol

[1future]

Originally Posted by JackieMoon86

Yes, you'll still definitely be able to hear the exhaust. It has a nice roar/rumble, it gets to the point where I have to watch my RPMS and speed sometimes. lol

Great. Ordered the exhaust this morning. Will update once it's on.

[stevesnj]

Anyone have TRD lowering springs and 16" wheels with this exhaust? I'm going this way and I hate to have this exhaust scrape on the ground.

[JackieMoon86]

Originally Posted by 1future

Great. Ordered the exhaust this morning. Will update once it's on.

nice! definitely update us when its on.

Originally Posted by stevesnj

Anyone have TRD lowering springs and 16" wheels with this exhaust? I'm going this way and I hate to have this exhaust scrape on the ground.

I don't have the TRD springs, but I do have the Pro-kit which drop the same height as the TRD springs. And as for the 16" wheels, i still have factory wheels, but i don't scrape at all other than me leaving my gated driveway at certain angles. I don't think you should have a problem with it, but with a smaller wheel setup, you'll still scrape depending on the bump/driveways you go through.

[stevesnj]

Originally Posted by JackieMoon86

I don't have the TRD springs, but I do have the Pro-kit which drop the same height as the TRD springs. And as for the 16" wheels, i still have factory wheels, but i don't scrape at all other than me leaving my gated driveway at certain angles. I don't think you should have a problem with it, but with a smaller wheel setup, you'll still scrape depending on the bump/driveways you go through.

Great info! Much appreciated

[STV3]

Been slacking on making a video but here's a few pulls with my set up.

FT86SpeedFactory Catted UEL Header
Stock Over Pipe
Motiv Catted Front Pipe
Greddy Supreme Sp Cat-Back

[ame="https://www.youtube.com/watch?v=76vPClIAky0"]Greddy Supreme Sp Cat-Back Exhaust for FRS/BRZ - YouTube[/ame]

[RJasonKlein]

Originally Posted by STV3

Been slacking on making a video but here's a few pulls with my set up.

FT86SpeedFactory Catted UEL Header
Stock Over Pipe
Motiv Catted Front Pipe
Greddy Supreme Sp Cat-Back

Interesting - most of us on this forum don't run dual cats, but it's probably not a bad idea for keeping noise in check in The People's Republic of New York (I'm in Illinois, so I can relate!). I have a PTUNING header and intend on running a Motiv overpipe and Motiv catted front pipe, and the Greddy Supreme SP was on my short list. Yours sounds good - thanks for sharing.

[willnigguhwassuh]

[Speck]

Originally Posted by STV3

Been slacking on making a video but here's a few pulls with my set up.

FT86SpeedFactory Catted UEL Header
Stock Over Pipe
Motiv Catted Front Pipe
Greddy Supreme Sp Cat-Back

Brb replicating this setup

[Irace86]

Originally Posted by anewprelusion

I just noticed some cosmetic differences between the manufacturer's marketing photos, and my own unit. I'm just curious as to why this may be? Was the unit on GReddy's pictures a prototype of some sort? What does everyone else's look like?


1.) "GReddy" etching on the tips.
GReddy's = different texture inside the GReddy name
Mine = same texture inside the GReddy name as the rest of the tip.

2.) GReddy plate w/serial number under the muffler
Greddy's = No plate
Mine = Yes plate

3.) Box/Packaging difference
Titan Motorsports = Displays a taller and narrow box.
Mine = Flatter, but wider box. (Maybe different packaging for pickups?)


Just curious. = )

Maybe it's just me, but there looks to be a harder angle and edge to the tip on the double walled tips on the Greddy website pic and less on yours. Can anyone who owns this exhaust confirm this? The cambered edge looks smaller on this exhaust than say the Perrin, but on most people's pics the exhaust seems to have a barely noticeable camber.