04-24-2018, 12:30 PM | #57 |
Senior Member
Join Date: Oct 2016
Drives: DGM BRZ
Location: MN
Posts: 176
Thanks: 126
Thanked 78 Times in 60 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Wow, COTA really put your car through some abuse!
|
The Following User Says Thank You to jubella2 For This Useful Post: | Code Monkey (04-24-2018) |
05-10-2018, 05:31 PM | #58 |
Senior Member
Join Date: Jul 2016
Drives: Subaru BRZ
Location: Atlanta, GA
Posts: 838
Thanks: 870
Thanked 562 Times in 337 Posts
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
|
Whiteline camber bolts went back in, got an alignment, and bled brakes and clutch.
-3.6 camber in front, rear camber is what it is because I can only change it in 0.5 degree increments with the UCA, still should work well. |
05-24-2018, 05:10 PM | #59 |
Senior Member
Join Date: Jul 2016
Drives: Subaru BRZ
Location: Atlanta, GA
Posts: 838
Thanks: 870
Thanked 562 Times in 337 Posts
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
|
Is this too much lean? I feel like sway bars are in order.
|
The Following User Says Thank You to Code Monkey For This Useful Post: | Tristor (05-25-2018) |
05-31-2018, 03:52 PM | #60 |
Senior Member
Join Date: Jul 2016
Drives: Subaru BRZ
Location: Atlanta, GA
Posts: 838
Thanks: 870
Thanked 562 Times in 337 Posts
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
|
Flex Fuel kit installed.
|
05-31-2018, 05:27 PM | #61 | |
Proud of BOXER
Join Date: Dec 2012
Drives: Subaru Boxer
Location: Bay Area
Posts: 8,148
Thanks: 7,073
Thanked 6,846 Times in 3,675 Posts
Mentioned: 199 Post(s)
Tagged: 0 Thread(s)
|
Can you post up some more pics that show how you routed the fuel line? Looks like you came up with a different way to do it that keeps it further away from the engine.
__________________
Quote:
|
|
The Following User Says Thank You to Clipdat For This Useful Post: | Code Monkey (05-31-2018) |
05-31-2018, 09:07 PM | #62 |
Senior Member
Join Date: Jul 2016
Drives: Subaru BRZ
Location: Atlanta, GA
Posts: 838
Thanks: 870
Thanked 562 Times in 337 Posts
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
|
Good eye for detail!
I did not like the suggested routing around the abs unit for the long fuel line so I routed it under the abs unit. First, I put some expandable braided sleeving on the fuel line, then wiggled the line through. No rubbing anywhere as far as I can tell but when I change wheels for the track, I will pull the wheel liner and see if I can add a rubber loop clamp to hold the line further. |
The Following User Says Thank You to Code Monkey For This Useful Post: | Clipdat (05-31-2018) |
05-31-2018, 09:48 PM | #63 | |
Proud of BOXER
Join Date: Dec 2012
Drives: Subaru Boxer
Location: Bay Area
Posts: 8,148
Thanks: 7,073
Thanked 6,846 Times in 3,675 Posts
Mentioned: 199 Post(s)
Tagged: 0 Thread(s)
|
Looks great, thank you so much for the additional pics. Great job routing it, and that nylon sheath looks like it'll add another layer of protection from abrasion/friction.
I'm still not totally content with mine that's using the suggested/default routing, but I went for a drive today and then popped the hood and touched the line at it's closest point to the engine, and it didn't even feel warm/hot to the touch. I still might put a reflective gold jacket around it for peace of mind. Thanks again.
__________________
Quote:
|
|
The Following User Says Thank You to Clipdat For This Useful Post: | Code Monkey (05-31-2018) |
06-08-2018, 10:20 PM | #64 |
Senior Member
Join Date: Jul 2016
Drives: Subaru BRZ
Location: Atlanta, GA
Posts: 838
Thanks: 870
Thanked 562 Times in 337 Posts
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
|
Finished e85 tune (green and blue curves, the red curve is 93 octane).
|
06-10-2018, 08:45 PM | #65 |
Senior Member
Join Date: Jul 2016
Drives: Subaru BRZ
Location: Atlanta, GA
Posts: 838
Thanks: 870
Thanked 562 Times in 337 Posts
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
|
Installed Hotchkis 25mm front sway bar, Hotchkis 19mm rear sway bar, and Hotchkis rear endlinks. I have the front sway bar on the soft setting, and the rear on the second soft setting. Aimed for a 3/8" rake with the right side a bit taller than the left side to account for drivers weight, pinch weld heights:
Code:
4.66 4.52 5.02 4.88 |
06-21-2018, 10:32 PM | #66 |
Senior Member
Join Date: Jul 2016
Drives: Subaru BRZ
Location: Atlanta, GA
Posts: 838
Thanks: 870
Thanked 562 Times in 337 Posts
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
|
Another oil change (10,190 miles) in preparation for the upcoming two hpde's. Also changed the diff fluid.
|
06-21-2018, 10:39 PM | #67 |
Senior Member
Join Date: Jul 2016
Drives: Subaru BRZ
Location: Atlanta, GA
Posts: 838
Thanks: 870
Thanked 562 Times in 337 Posts
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
|
Pulled the fender liner to see if the flex fuel line was rubbing anywhere. Did not notice anything problematic but secured the line with a p-clamp just in case it moves too much during hpde.
|
06-25-2018, 08:31 AM | #68 |
Junior Member
Join Date: Mar 2018
Drives: In the market for an 86 twin
Location: Houston
Posts: 8
Thanks: 0
Thanked 5 Times in 3 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Did you find out what was making the squeak on Saturday?
|
06-25-2018, 08:33 AM | #69 |
Senior Member
Join Date: Jul 2016
Drives: Subaru BRZ
Location: Atlanta, GA
Posts: 838
Thanks: 870
Thanked 562 Times in 337 Posts
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
|
|
06-25-2018, 02:48 PM | #70 |
Junior Member
Join Date: Mar 2018
Drives: In the market for an 86 twin
Location: Houston
Posts: 8
Thanks: 0
Thanked 5 Times in 3 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Could it have been your pads, or was it not that kind of squeak? I noticed you and Joe were both making a little noise on decel when they brought yall into the hot pits.
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Berzerk's 2017 CWP 'Slow and Steady' Build Thread | Berzerk | Member's Car Journals | 12 | 07-24-2017 04:57 PM |
Rodie's slow '13 FR-S build | rodie | Member's Car Journals | 0 | 06-14-2015 08:05 PM |
Slow Progression FRS Build | dgerny | Member's Car Journals | 1 | 04-15-2014 06:48 PM |
Tkalz slow build! | Tkalz | Member's Car Journals | 15 | 10-13-2013 05:35 PM |
Slow Build by Jooks | jooks | Member's Car Journals | 4 | 07-03-2013 10:53 PM |