10 inch tablet mount?

[sqd]

Does anyone have a good solution how to mount a 10 inch tablet (portrait orientation), and not block the headunit or climate controls etc?

I use one with my Ecutek bluetooth interface to monitor things. Would be nice to have it mounted for easy overview.

[nwgabrz]

You can use either the Arkon arm grip or the Beatsonic dash holder. I've used both and I'll see if I can upload photos later.

[LimitedSlip]

I haven't tried this one but I think it might work:

https://www.amazon.com/dp/B00A2AEEGE/

[nwgabrz]

Originally Posted by nwgabrz

You can use either the Arkon arm grip or the Beatsonic dash holder. I've used both and I'll see if I can upload photos later.

Here are the photos.

Beatsonic mounted horizontally


Beatsonic mounted vertically


Arkon arm grip mounted horizonally


Arkon arm grip mounted vertically


For both the Beatsonic and Arkon ones, I switched out the plate for the Scosche magnetic joint so the tablet has the flat magnet in the back. If you want it to be more secure, you can always use the normal grip, but I wanted something that I could more easily mount and dismount, and be cleaner.

edit--
As you can see, I also had mounted it on brackets over the climate controls as well.