Advance Multiplier always 1 with 95 RON (OTS STAGE 1)

[ft86tr]

Hello everyone!

I have just bought my OFT. With the stock tune, IAM was showing always 0. Then I flashed OTS Stage 1 ZA1JF10I (MY2016 EU 6AT) v4.03. Then IAM became 1 and I see almost no knock correction with 95 RON. The IAM never dropped. Is there a problem with OFT or my Car since fuel quality is low in my country. Thank you for your help.

Edit: There is nothing happening with FLKC

[gen3v8]

Do a log of some very spirited driving to be sure it`s not bad in any way. 1 is perfect for the multiplier eg. 1IAM x 25deg ignition advance is 25deg advance 0.9IAM x 25deg is 22.5deg ign advance. This would mean a timing reduction from knock and a data log would tell.

[ft86tr]

Originally Posted by gen3v8

Do a log of some very spirited driving to be sure it`s not bad in any way. 1 is perfect for the multiplier eg. 1IAM x 25deg ignition advance is 25deg advance 0.9IAM x 25deg is 22.5deg ign advance. This would mean a timing reduction from knock and a data log would tell.

Thank you . And as far as i know, v4 tunes has initial IAM 0.7 . However, my IAM is always 1 even on start. I am worried about false reading.

[steve99]

Originally Posted by ft86tr

Thank you . And as far as i know, v4 tunes has initial IAM 0.7 . However, my IAM is always 1 even on start. I am worried about false reading.

update oft via open flash manager and also update the Templare file manually its separate process both can effect oft logging. OFT wont log a lot of stock tunes correctly you need to be runnog an oft tune for logging to work correctly

[ft86tr]

Originally Posted by steve99

update oft via open flash manager and also update the Templare file manually its separate process both can effect oft logging. OFT wont log a lot of stock tunes correctly you need to be runnog an oft tune for logging to work correctly

I have just updated of manager and my template manually. In stage 1 tune my IAM always stuck at 1 (even on starts). Doesnt v4 tunes IAM start with 0.7?

[steve99]

Originally Posted by ft86tr

I have just updated of manager and my template manually. In stage 1 tune my IAM always stuck at 1 (even on starts). Doesnt v4 tunes IAM start with 0.7?

yes all oft v4 petrol tunes iam initial 0.7 on E85 tunes its 1

[ft86tr]

Originally Posted by steve99

yes all oft v4 petrol tunes iam initial 0.7 on E85 tunes its 1

Yes but mine starts with 1 with v4 petrol tune?

[steve99]

Originally Posted by ft86tr

Yes but mine starts with 1 with v4 petrol tune?

open tune in romraider and check but id say its logging issue with oft