Plastic Modeling - Page 75 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Spuds · 06-16-2021, 11:10 PM

Quote:

Originally Posted by Tcoat

Watt is the internal resistance

Ohm-ygod tcoat, you can't just mix power and resistance units...

Kaotic Lazagna · 06-17-2021, 05:43 AM

Quote:

Originally Posted by soundman98

keep everything else as you had it. the rear lights on channel 2, the front lights on channel 1.

I'll try that on the next model. Thank you for the info!

Ultramaroon · 06-17-2021, 12:07 PM

Quote:

Originally Posted by Tcoat

Watt is the internal resistance

Watts on second!

LimitedSlip · 06-19-2021, 10:33 PM

I realize this is the *plastic* modeling thread but perhaps I might ask a metal modeling question? I drive a Halo 860 which has black stripes across the hood, roof, and trunk (see my avatar). I also have a 1/18 scale GT86 metal model in Halo - but no stripes. The real stripes are 5" wide at their widest which is .27" in 1/18 scale. I would like to add stripes to the model. What can I use for stripes that would be 1/4" wide and reasonably easy to work with? I thought maybe actual automotive black pin striping but is there any modeling alternatives? Thanks much!

Tcoat · 06-19-2021, 10:41 PM

Quote:

Originally Posted by LimitedSlip

I realize this is the *plastic* modeling thread but perhaps I might ask a metal modeling question? I drive a Halo 860 which has black stripes across the hood, roof, and trunk (see my avatar). I also have a 1/18 scale GT86 metal model in Halo - but no stripes. The real stripes are 5" wide at their widest which is .27" in 1/18 scale. I would like to add stripes to the model. What can I use for stripes that would be 1/4" wide and reasonably easy to work with? I thought maybe actual automotive black pin striping but is there any modeling alternatives? Thanks much!

Hobby Lobby or any decent hobby shop sells black decal material that would work well for this.

Kaotic Lazagna · 06-19-2021, 11:35 PM

Quote:

Originally Posted by LimitedSlip

I realize this is the *plastic* modeling thread but perhaps I might ask a metal modeling question? I drive a Halo 860 which has black stripes across the hood, roof, and trunk (see my avatar). I also have a 1/18 scale GT86 metal model in Halo - but no stripes. The real stripes are 5" wide at their widest which is .27" in 1/18 scale. I would like to add stripes to the model. What can I use for stripes that would be 1/4" wide and reasonably easy to work with? I thought maybe actual automotive black pin striping but is there any modeling alternatives? Thanks much!

I would think that actual automotive pin stripes will be too thick for a model, as in it'll be too raised.

Kaotic Lazagna · 06-19-2021, 11:39 PM

@StraightOuttaCanadaEh works with 1/18 models, so he might have a good suggestion for your stripes.

StraightOuttaCanadaEh · 06-20-2021, 12:02 PM

Quote:

Originally Posted by LimitedSlip

I realize this is the *plastic* modeling thread but perhaps I might ask a metal modeling question? I drive a Halo 860 which has black stripes across the hood, roof, and trunk (see my avatar). I also have a 1/18 scale GT86 metal model in Halo - but no stripes. The real stripes are 5" wide at their widest which is .27" in 1/18 scale. I would like to add stripes to the model. What can I use for stripes that would be 1/4" wide and reasonably easy to work with? I thought maybe actual automotive black pin striping but is there any modeling alternatives? Thanks much!

Yeah just decals and you'll have to eyeball them and cut them. Can use hobby tape to make a template first

Dadhawk · 06-27-2021, 02:44 PM

New Lego kit I received as Father's Day present. X-Wing fighter, complete with functioning x-wings. The two photos with the red posts show the wing support that allows the wings to be either open or closed.

(Edit: I fixed the one decal that is sticking up later)

Kaotic Lazagna · 06-27-2021, 02:58 PM

*R2D2 noises*

Dadhawk · 06-27-2021, 04:12 PM

Quote:

Originally Posted by Kaotic Lazagna

*R2D2 noises*

He's probably complaining about the design not allowing him to sit low enough in the ship.

Kaotic Lazagna · 06-27-2021, 04:59 PM

Uncleanness, lazy pics. Just need the wipers on. Didn't fully "smash" down the wires, so the hood is slightly open. Also, disappointed in how the BSI gold made the left side headlight fog up.

JD001 · 06-27-2021, 05:02 PM

Quote:

Originally Posted by Kaotic Lazagna

Uncleanness, lazy pics. Just need the wipers on. Didn't fully "smash" down the wires, so the hood is slightly open. Also, disappointed in how the BSI gold made the left side headlight fog up.

It looks as if its been through a really bad backstreet body repair shop.... Write off!!

Kaotic Lazagna · 06-27-2021, 05:13 PM

Quote:

Originally Posted by JD001

It looks as it its been through a really bad backstreet body repair shop.... Write off!!

06-19-2021, 10:33 PM	#1040
LimitedSlip Senior Citizen Member Join Date: Jul 2018 Drives: Then-1977 Celica GT Now-2017 860SE Location: In A Galaxy Far Far Away Posts: 393 Thanks: 145 Thanked 385 Times in 201 Posts Mentioned: 12 Post(s) Tagged: 1 Thread(s)	Need modeling advice please . . . I realize this is the plastic modeling thread but perhaps I might ask a metal modeling question? I drive a Halo 860 which has black stripes across the hood, roof, and trunk (see my avatar). I also have a 1/18 scale GT86 metal model in Halo - but no stripes. The real stripes are 5" wide at their widest which is .27" in 1/18 scale. I would like to add stripes to the model. What can I use for stripes that would be 1/4" wide and reasonably easy to work with? I thought maybe actual automotive black pin striping but is there any modeling alternatives? Thanks much!

06-27-2021, 02:44 PM	#1045
Dadhawk 1st86 Driver! Join Date: Feb 2012 Drives: '13 FR-S (#3 of 1st 86) Location: Powder Springs, GA Posts: 19,814 Thanks: 38,822 Thanked 24,939 Times in 11,376 Posts Mentioned: 182 Post(s) Tagged: 4 Thread(s)	New Lego kit I received as Father's Day present. X-Wing fighter, complete with functioning x-wings. The two photos with the red posts show the wing support that allows the wings to be either open or closed. (Edit: I fixed the one decal that is sticking up later) Attached Images __________________ Visit my Owner's Journal where I wax philosophic on all things FR-S Post your 86 or see others in front of a(n) (in)famous landmark. What fits in your 86? Show us the "Junk In Your Trunk".

06-27-2021, 04:59 PM	#1048
Kaotic Lazagna Senior Member Join Date: Apr 2014 Drives: GR Corolla Location: Lathrop, CA Posts: 4,926 Thanks: 3,087 Thanked 3,017 Times in 1,859 Posts Mentioned: 40 Post(s) Tagged: 2 Thread(s)	Uncleanness, lazy pics. Just need the wipers on. Didn't fully "smash" down the wires, so the hood is slightly open. Also, disappointed in how the BSI gold made the left side headlight fog up. Attached Images

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TRD ABS Plastic Kit?	Shims	Cosmetic Modification (Interior/Exterior/Lighting)	5	07-19-2015 07:31 PM
Front lip - abs plastic	_frs	Want-To-Buy Requests	0	09-21-2014 11:11 AM
Trade my black dash plastic for your silver dash plastic thread.	F3dzo	Southeast	0	07-17-2012 10:06 PM
plastic interior	lancie	Scion FR-S / Toyota 86 GT86 General Forum	34	10-16-2011 01:02 PM

06-19-2021, 11:39 PM	#1043
Kaotic Lazagna Senior Member Join Date: Apr 2014 Drives: GR Corolla Location: Lathrop, CA Posts: 4,926 Thanks: 3,087 Thanked 3,017 Times in 1,859 Posts Mentioned: 40 Post(s) Tagged: 2 Thread(s)	@StraightOuttaCanadaEh works with 1/18 models, so he might have a good suggestion for your stripes.

06-27-2021, 02:58 PM	#1046
Kaotic Lazagna Senior Member Join Date: Apr 2014 Drives: GR Corolla Location: Lathrop, CA Posts: 4,926 Thanks: 3,087 Thanked 3,017 Times in 1,859 Posts Mentioned: 40 Post(s) Tagged: 2 Thread(s)	R2D2 noises

User Name		Remember Me?
Password