2020 BRZ head unit into the FR-S (2013)

[mgrabo1024]

I recently acquired a cheap head unit from a 2020 (P/N 86271CA690) part out. it was listed as unknown functionality. so I took the gamble hoping to get android auto in my 2013, it was cheap BTW.

After plugging in the head unit, to my surprise it powered up after plugging it in and cycling the key. but I had a few issues that maybe more knowledgeable people can help with.

1st when I turned the key off the radio stays on.

2nd USB connection for android auto doesn't work, also usb drive with music won't work.

3rd the built in map/gps system shows me being in California, i reside in NY.
(I think i figured out I don't have the add in GPS antenna for this)

4th I have an aftermarket back up camera which doesn't work.
(I was left with 1 extra connector which i believe contains the camera connection.)

[mgrabo1024]

I did figure out the turning off isn't an issue. It will go off on its own after a few minutes(2-5 minutes approx.) I ordered a 28 pin adapter which should allow me to plug in my back up camera. I also have a GPS antenna on the way to see if I can get nav working. I just got in a usb port plus wires to check android auto connection.

[mgrabo1024]

Gps antenna is in I now have working built in navigation. Usb cables were i have dual ports plus iadded plus power to the aux unit under the radio. And I now have working android auto. I still need to get my backup camera working.

But definitely made progress after reviewing wiring schematics for a 2018 BRZ and looking for missing connections vs my 2013 FRS

[coolhandluke]

Thank you for sharing your advice and experience. I may hunt a 2020 HU for my 2013.

[mgrabo1024]

I have recently supplied my documents (excel sheet) to someone on a face book group. He recently completed the same swap (2015 BRZ) and has almost everything up and running. If you need it I would be happy to share it.

[Ads]

Originally Posted by mgrabo1024

I have recently supplied my documents (excel sheet) to someone on a face book group. He recently completed the same swap (2015 BRZ) and has almost everything up and running. If you need it I would be happy to share it.

Hi mgrabo, would I be able to grab that excel spreadsheet off you? I am about to put a 2020 86 head unit into a 2013 86.

I am hoping the only issue I have is the amp bypass, but it will be handy to have your notes if I run into any other issues. TIA!

[coolhandluke]

Originally Posted by mgrabo1024

I have recently supplied my documents (excel sheet) to someone on a face book group. He recently completed the same swap (2015 BRZ) and has almost everything up and running. If you need it I would be happy to share it.

Myself and I see others would benefit from sharing the information here.

[ICEBONEZ]

Originally Posted by mgrabo1024

I have recently supplied my documents (excel sheet) to someone on a face book group. He recently completed the same swap (2015 BRZ) and has almost everything up and running. If you need it I would be happy to share it.

Can you share your excel sheet? I’m in the process of taking on this project myself. Thanks!

[Grimm0ne]

info would be greatly appreciated, moving a 2019 into my 13, need the pinouts to do the wire dance.

[LRNAD90]

Genuinely curious, with the large number of reasonably priced double DIN aftermarket HU's available these days, what's the advantage to upgrading to a later model OEM unit? Seems like even the latest infotainment units were considered by reviewers as less than desirable?

[Grimm0ne]

Originally Posted by LRNAD90

Genuinely curious, with the large number of reasonably priced double DIN aftermarket HU's available these days, what's the advantage to upgrading to a later model OEM unit? Seems like even the latest infotainment units were considered by reviewers as less than desirable?

for my 13, just want a factory look. I've looked at aftermarket ones and seems ok, back in the day when cars didn't have an upgrade option to swap to a newer model (my dsm days) I went Kenwood. Just like the look of factory. working on making a harness for the BRZ's but i just keep going in circles on the pinouts for the 2013's and the 2017+, it plugs in fine, but no backup and half the speakers don't work.

[LRNAD90]

Originally Posted by Grimm0ne

for my 13, just want a factory look. I've looked at aftermarket ones and seems ok, back in the day when cars didn't have an upgrade option to swap to a newer model (my dsm days) I went Kenwood. Just like the look of factory. working on making a harness for the BRZ's but i just keep going in circles on the pinouts for the 2013's and the 2017+, it plugs in fine, but no backup and half the speakers don't work.

Try checking with Crutchfield, they probably have a document with the pinouts for each model year..

[Grimm0ne]

Originally Posted by LRNAD90

Try checking with Crutchfield, they probably have a document with the pinouts for each model year..

That hit me last night. Will shoot them an email and see, but thanks for that

[Dhanesh]

Hello. Can you share the GPS antenna and USB port that you installed in your car. I am planning to buy the same hear unit from eBay. 86271CA690. Did you have to instal the amp jumper harness as well?