Stronger driveshaft replacement? - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

lapsio · 03-08-2024, 05:22 AM

Hello

I have stock (engine-wise) 2020 BRZ and it seems I have bent driveshaft joints after 3 years of use (possibly leading to transmission leakage which was detected first). Since OEM driveshaft is kinda expensive (around 1500 usd in EU) I'm considering some aftermarket options that wouldn't fail so quickly,

Any suggestions? Is it... I wouldn't say "normal" but within expectations to kill driveshaft on stock BRZ in 3 years? It's driven pretty hard, also on track, using tw80 / tw100 tyres so there may be some slightly increased stress on it coming from increased grip but it shouldn't be too bad I believe... I dunno.

NoHaveMSG · 03-08-2024, 09:30 AM

I’ve never heard of someone killing a stock driveshaft in one of these.

You are limited to the carbon fiber aftermarket options. DSS or PST. I don’t think Verus makes their’s anymore but they used to have one.

The DSS aluminum is not an option for cars seeing over 110mph. @blsfrs had one fail and did a thread on it. DSS admitted the diameter is not enough and the critical speed of the aluminum shaft is too low.

blsfrs · 03-08-2024, 09:50 AM

IMHO: I'd stick with the stock one.

https://www.ft86club.com/forums/showthread.php?t=154478

Ultramaroon · 03-08-2024, 01:28 PM

OP is in Poland.

@lapsio, I agree with others. Stock is the only safe bet. Something very strange must have happened to damage your original.

Grady · 03-08-2024, 06:26 PM

Stock is your best bet. All one piece upgrades will have speed limitations and are more susceptible to physical damage. If your stock got damage my bet it was from hitting something.

blsfrs · 03-09-2024, 10:16 AM

Quote:

Originally Posted by Ultramaroon

OP is in Poland.

@lapsio, I agree with others. Stock is the only safe bet. Something very strange must have happened to damage your original.

According to USPS, shipping a 20lbs item to Poland would be around $220. There might be cheaper options. That's better than $1500 for a nude one.

humfrz · 03-09-2024, 03:53 PM

Do they not have wrecking yards in Poland?

Sapphireho · 03-09-2024, 07:54 PM

I've had my CF one piece up to 120mph a couple times. Smooth as silk.

Grady · 03-09-2024, 10:26 PM

Quote:

Originally Posted by Sapphireho

I've had my CF one piece up to 120mph a couple times. Smooth as silk.

I have a Verus and at 130 it starts to have a harmonic vibration.(it does not vibrate but makes a noise) You can push it past but if you do it repeatedly you are goin to have a catastrophic failure.

Ultramaroon · 03-09-2024, 10:57 PM

Quote:

Originally Posted by blsfrs

According to USPS, shipping a 20lbs item to Poland would be around $220. There might be cheaper options. That's better than $1500 for a nude one.

Oh, hell yes. Good point.

Ultramaroon · 03-09-2024, 10:58 PM

Quote:

Originally Posted by humfrz

Do they not have wrecking yards in Poland?

Also a good point.

...well, question.

Sapphireho · 03-10-2024, 03:10 AM

Quote:

Originally Posted by Grady

I have a Verus and at 130 it starts to have a harmonic vibration.(it does not vibrate but makes a noise) You can push it past but if you do it repeatedly you are goin to have a catastrophic failure.

Mine is DSS.

blsfrs · 03-10-2024, 10:13 AM

Several months ago (in a galaxy far, far away) Didn't someone post about a CF driveshaft failure on their rally car.

Grady · 03-10-2024, 10:38 AM

Quote:

Originally Posted by Sapphireho

Mine is DSS.

Looks like about same diameter, that ones critical speed will be similar.

03-08-2024, 05:22 AM	#1
lapsio Member Join Date: Mar 2021 Drives: 2020 BRZ Final Edition, 1999 MX5 NB Location: Poland Posts: 90 Thanks: 41 Thanked 31 Times in 18 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Stronger driveshaft replacement? Hello I have stock (engine-wise) 2020 BRZ and it seems I have bent driveshaft joints after 3 years of use (possibly leading to transmission leakage which was detected first). Since OEM driveshaft is kinda expensive (around 1500 usd in EU) I'm considering some aftermarket options that wouldn't fail so quickly, Any suggestions? Is it... I wouldn't say "normal" but within expectations to kill driveshaft on stock BRZ in 3 years? It's driven pretty hard, also on track, using tw80 / tw100 tyres so there may be some slightly increased stress on it coming from increased grip but it shouldn't be too bad I believe... I dunno. Last edited by lapsio; 03-08-2024 at 05:40 AM.

03-08-2024, 01:28 PM	#4
Ultramaroon extra what? Join Date: Sep 2014 Drives: a 13 e8h frs Location: vantucky, wa Posts: 32,101 Thanks: 52,557 Thanked 36,842 Times in 19,100 Posts Mentioned: 1111 Post(s) Tagged: 9 Thread(s)	OP is in Poland. @lapsio, I agree with others. Stock is the only safe bet. Something very strange must have happened to damage your original. __________________ service manuals

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SOLD Please Remove. (Dallas, TX) Driveshaft Shop Carbon Fiber 6MT Driveshaft	Brzzee	Transmission and Driveline	1	09-14-2018 09:22 AM
Driveshaft Shop Carbon Driveshaft for Manual Transmission for Sale!! (SOLD)	GT86Asia	Transmission and Driveline	3	07-30-2018 04:06 PM
Nameless 2.5" catted/resonated overpipe + Driveshaft Shop aluminum driveshaft	#my86build	Engine, Exhaust, Transmission	11	02-04-2017 05:42 PM

03-08-2024, 09:50 AM	#3
blsfrs Senior Member Join Date: Dec 2018 Drives: 2013 frs base Location: central Virginia Posts: 1,243 Thanks: 2,033 Thanked 1,164 Times in 561 Posts Mentioned: 12 Post(s) Tagged: 0 Thread(s)	IMHO: I'd stick with the stock one. https://www.ft86club.com/forums/showthread.php?t=154478

03-09-2024, 03:53 PM	#7
humfrz Senior Member Join Date: May 2013 Drives: 2013 FR-S, white, MT Location: Puyallup, WA Posts: 30,072 Thanks: 29,149 Thanked 32,210 Times in 16,578 Posts Mentioned: 709 Post(s) Tagged: 2 Thread(s)	Do they not have wrecking yards in Poland?

03-09-2024, 07:54 PM	#8
Sapphireho Chicken bucket Join Date: Mar 2016 Drives: '15 ultramarine Location: Idaho Posts: 13,380 Thanks: 5,537 Thanked 18,533 Times in 8,756 Posts Mentioned: 158 Post(s) Tagged: 0 Thread(s)	I've had my CF one piece up to 120mph a couple times. Smooth as silk.

03-10-2024, 10:13 AM	#13
blsfrs Senior Member Join Date: Dec 2018 Drives: 2013 frs base Location: central Virginia Posts: 1,243 Thanks: 2,033 Thanked 1,164 Times in 561 Posts Mentioned: 12 Post(s) Tagged: 0 Thread(s)	Several months ago (in a galaxy far, far away) Didn't someone post about a CF driveshaft failure on their rally car.

User Name		Remember Me?
Password