follow ft86club on our blog, twitter or facebook.
FT86CLUB
Ft86Club
Speed By Design
Register Garage Members List Calendar Search Today's Posts Mark Forums Read

Go Back   Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB > Technical Topics > Engine, Exhaust, Transmission

Engine, Exhaust, Transmission Discuss the FR-S | 86 | BRZ engine, exhaust and drivetrain.


User Tag List

Reply
 
Thread Tools Search this Thread
Old 03-03-2024, 10:46 PM   #1
B00STED86
Member
 
Join Date: Jan 2024
Drives:
Posts: 36
Thanks: 6
Thanked 5 Times in 4 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Stalling after ID 1050X install and new tune

Hi Guys, new member.

I recently bought a 13 brz with a JDL turbo kit.
It has a Omni 3 bar and was running stock fuel pump and injectors.

I bought ID 1050X injectors, DW 65c pump and a ecutek with a tune from delicious.

I知 having an issue with it stalling out after the rpms drop from the warm up.

Tested the fuel pump after I installed it and it idled fine.

I did do a couple dumb things - after I installed the injectors (before loading the tube) I cranked it and it started for a half second and died. Then I installed the tune and started it up and I got a really rough idle and code p062d. I didn稚 have the DI Ecu grounded - fixed that.

Now it will start but like I said it stalls out after 30 seconds. I知 guessing I dumped too much fuel when I tried to start it without the tune or could this be something else? I did buy the injectors second hand, the guy got them flow tested before I came out and showed me the photo. I知 going to log what I can and send it in tomorrow. Just wanted to see if anyone had any ideas that I could try.


Sent from my iPhone using Tapatalk
B00STED86 is offline   Reply With Quote
Old 03-04-2024, 02:53 AM   #2
x808drifter
LMGTFY
 
x808drifter's Avatar
 
Join Date: Mar 2016
Drives: 13 FRS, 91 Miata
Location: Lava Town, HI
Posts: 2,776
Thanks: 5,561
Thanked 3,647 Times in 1,625 Posts
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
inb4 someone says post the tune using datazap.
Not even sure if you can if the tune is locked though.

Too much fuel from before the tune is highly unlikely. It would never have run if that was an actual issue.
Is it still getting too much fuel? Maybe. No Wideband?
x808drifter is offline   Reply With Quote
Old 03-04-2024, 08:30 AM   #3
tomm.brz
Senior Member
 
Join Date: Jan 2017
Drives: brz 2017 hksv2
Location: italy
Posts: 2,207
Thanks: 502
Thanked 1,070 Times in 778 Posts
Mentioned: 65 Post(s)
Tagged: 0 Thread(s)
i just think it's the tune, big injectors need a good fine tuning for warm low load condition and delicious tune are just canned tunes naturally full of errors (as per discrepancy from target to actual values)
If you have a lighter flywheel is even worse

yes logs would help
tomm.brz is offline   Reply With Quote
Old 03-04-2024, 08:46 AM   #4
Matt93SE
Senior Member
 
Join Date: Sep 2020
Drives: 2013 FR-S, 2017 BRZ
Location: Houston-ish
Posts: 115
Thanks: 21
Thanked 108 Times in 59 Posts
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by tomm.brz View Post
i just think it's the tune, big injectors need a good fine tuning for warm low load condition and delicious tune are just canned tunes naturally full of errors (as per discrepancy from target to actual values)
If you have a lighter flywheel is even worse

yes logs would help
Can confirm the ID1050 hate to run warm. after I shut my car off when hot, it sometimes takes 10-15 retries before I can get the damn car to start and idle again. real pain in the butt after a race when I'm stuck in impound and there are people behind me trying to leave.
this is with a local tuner and true dyno tuning as well. low load, low rpm just sucks with big injectors.
Matt93SE is offline   Reply With Quote
Old 03-04-2024, 10:32 AM   #5
B00STED86
Member
 
Join Date: Jan 2024
Drives:
Posts: 36
Thanks: 6
Thanked 5 Times in 4 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Thanks for the feedback fellas. I have the stock flywheel. I do have some condensation spitting out of the exhaust as well. I知 going to log tonight after work.


Sent from my iPhone using Tapatalk
B00STED86 is offline   Reply With Quote
The Following User Says Thank You to B00STED86 For This Useful Post:
x808drifter (03-04-2024)
Old 03-04-2024, 04:54 PM   #6
Matt93SE
Senior Member
 
Join Date: Sep 2020
Drives: 2013 FR-S, 2017 BRZ
Location: Houston-ish
Posts: 115
Thanks: 21
Thanked 108 Times in 59 Posts
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by B00STED86 View Post
Thanks for the feedback fellas. I have the stock flywheel. I do have some condensation spitting out of the exhaust as well. I知 going to log tonight after work.
Condensation in the exhaust is completely normal, especially when the engine and exhaust aren't up to full operating temp. the main chemical products of burning fuel are CO2 and H2O. so until the car is driven hard enough to get the entire exhaust above 100C, you will have condensation out the tail pipe.
Matt93SE is offline   Reply With Quote
Old 03-04-2024, 11:47 PM   #7
B00STED86
Member
 
Join Date: Jan 2024
Drives:
Posts: 36
Thanks: 6
Thanked 5 Times in 4 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
With some further investigation, I might not have loaded the rom correctly. This Brz was tuned by the previous owner.

Was I supposed to load the stock tune before the Delicious tune?

I got an error the first few times I tired flashing - ECU VIN () does not match ROM VIN.

I知 not sure what I did but the ROM started to load after a few tries,I watched the tach rise and followed the instructions.

I just tried to see if I could switch maps to verify it was loaded and it wouldn稚 switch

This is my first time attempting this.

If I go and load the stock rom and then try to load the tuned rom, would that work?


Sent from my iPhone using Tapatalk
B00STED86 is offline   Reply With Quote
Old 03-04-2024, 11:54 PM   #8
B00STED86
Member
 
Join Date: Jan 2024
Drives:
Posts: 36
Thanks: 6
Thanked 5 Times in 4 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by Matt93SE View Post
Condensation in the exhaust is completely normal, especially when the engine and exhaust aren't up to full operating temp. the main chemical products of burning fuel are CO2 and H2O. so until the car is driven hard enough to get the entire exhaust above 100C, you will have condensation out the tail pipe.

Thanks Matt


Sent from my iPhone using Tapatalk
B00STED86 is offline   Reply With Quote
Old 03-05-2024, 01:47 AM   #9
x808drifter
LMGTFY
 
x808drifter's Avatar
 
Join Date: Mar 2016
Drives: 13 FRS, 91 Miata
Location: Lava Town, HI
Posts: 2,776
Thanks: 5,561
Thanked 3,647 Times in 1,625 Posts
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by B00STED86 View Post
With some further investigation, I might not have loaded the rom correctly. This Brz was tuned by the previous owner.

Was I supposed to load the stock tune before the Delicious tune?

I got an error the first few times I tired flashing - ECU VIN () does not match ROM VIN.

I知 not sure what I did but the ROM started to load after a few tries,I watched the tach rise and followed the instructions.

I just tried to see if I could switch maps to verify it was loaded and it wouldn稚 switch

This is my first time attempting this.

If I go and load the stock rom and then try to load the tuned rom, would that work?


Sent from my iPhone using Tapatalk
Please clarify.
Is the new tune for the ID1050X's?

You need a working tune for those injectors. Don't worry about anything else yet.
x808drifter is offline   Reply With Quote
Old 03-05-2024, 05:58 PM   #10
RedReplicant
Senior Member
 
Join Date: Aug 2015
Drives: None
Location: Arizona
Posts: 942
Thanks: 1,504
Thanked 1,281 Times in 541 Posts
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by Matt93SE View Post
Can confirm the ID1050 hate to run warm. after I shut my car off when hot, it sometimes takes 10-15 retries before I can get the damn car to start and idle again. real pain in the butt after a race when I'm stuck in impound and there are people behind me trying to leave.
this is with a local tuner and true dyno tuning as well. low load, low rpm just sucks with big injectors.
This is not my experience, whatever you're experiencing more than likely isn't the injectors. I am running them on my K24 swapped car, it idles like stock and there are zero issues starting hot on the scales at impound or anywhere else.
__________________
RedReplicant is offline   Reply With Quote
The Following User Says Thank You to RedReplicant For This Useful Post:
DarkPira7e (03-05-2024)
Old 03-05-2024, 06:50 PM   #11
Grady
Senior Member
 
Grady's Avatar
 
Join Date: Jun 2017
Drives: BRZ Yellow, 2019 Ranger, 2011 Evora
Location: Dallas
Posts: 1,699
Thanks: 352
Thanked 1,484 Times in 778 Posts
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
Garage
Are you still on the base tune? That will be the issue. You will need to do a cold start and log everything so they can fine tune it for you. Plus you will need to log pulls to verify the tune is good. Flash and go just means it will run. That is about it. Delicious does a lot of cars so they are good at getting close with the initial tune but you paid for a custom tune so get it.
Grady is offline   Reply With Quote
Old 03-05-2024, 08:43 PM   #12
B00STED86
Member
 
Join Date: Jan 2024
Drives:
Posts: 36
Thanks: 6
Thanked 5 Times in 4 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Okay so here痴 new info


I have the tune for the 1050x. I thought it flashed but something must of happened during the process. Talked with delicious and they said to load the stock rom and then try the tuned rom.

Stock rom flashed fine but then when trying to flash the tune I知 getting an error - ECU VIN () does not match ROM VIN ( my vin)

I知 not sure what the previous owner used to tune.


Sent from my iPhone using Tapatalk
B00STED86 is offline   Reply With Quote
Old 03-05-2024, 09:54 PM   #13
DarkPira7e
Rust bucket enthusiast
 
DarkPira7e's Avatar
 
Join Date: Feb 2017
Drives: 2013 Turbo Firestorm FRS
Location: Vermont
Posts: 3,954
Thanks: 3,215
Thanked 4,107 Times in 2,052 Posts
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by Matt93SE View Post
Can confirm the ID1050 hate to run warm.

This is a symptom of poor calibration, these injectors have great vaporization properties at both cold and high cylinder temps. The tuner just needs to spend more time learning about this platform, it sounds like.
__________________
Turbo FR-S Build - Build Thread
JDL EL Recirc manifold, Boostlab BL58x Turbo w/ T51R, 17x9 ARC-8, IAG block
DarkPira7e is offline   Reply With Quote
The Following User Says Thank You to DarkPira7e For This Useful Post:
RedReplicant (03-05-2024)
Old 03-05-2024, 10:05 PM   #14
x808drifter
LMGTFY
 
x808drifter's Avatar
 
Join Date: Mar 2016
Drives: 13 FRS, 91 Miata
Location: Lava Town, HI
Posts: 2,776
Thanks: 5,561
Thanked 3,647 Times in 1,625 Posts
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by DarkPira7e View Post
This is a symptom of poor calibration, these injectors have great vaporization properties at both cold and high cylinder temps. The tuner just needs to spend more time learning about this platform, it sounds like.
Pretty sure Delicious is familiar with the platform.
Or do they have more than one person making the tunes now?
x808drifter is offline   Reply With Quote
 
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
FS: Injector Dynamics 1050x injectors w/ wiring adapters EddyEggnog Engine, Exhaust, Bolt-Ons 7 07-11-2024 07:44 PM
1050x leak IsaiahW BRZ First-Gen (2012+) -- General Topics 3 04-09-2021 10:28 AM
LF: DW 770 or IC 1050X injectors kev0 Want-To-Buy Requests 2 03-16-2021 12:56 PM
Car is stalling on start after Intake+header and a tune install. WinterWolf Engine, Exhaust, Transmission 6 10-04-2019 08:44 AM
Sluggish/Stalling After aFe Intake Install FR-S Matt Engine, Exhaust, Transmission 6 01-15-2013 08:57 PM


All times are GMT -4. The time now is 05:09 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.

Garage vBulletin Plugins by Drive Thru Online, Inc.