Center console - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

dragoontwo · 12-01-2021, 06:35 PM

I have a mt and I wanted the extra cupholder that comes on the at version. I ordered the at console section itself 92113CC010 to see how it differs. The cupholder section will not cross over and I will have to order one.

The console section will fit into the mt car without issue. You just need the console, cupholder section and mats. I also ordered the foam pads that seem to be specific to the mt model. It looks like they will fit the at console just fine as well. I think they're there for noise.

PhatFreshPrince · 12-01-2021, 07:29 PM

Do you think it will fit into your manual car without cutting the existing console? I, too, was a little disappointed there were not more accessible cup holders.

dragoontwo · 12-01-2021, 08:15 PM

I don't understand what you are asking. I said it does fit. I put it in the car to test for it already. I just need the cupholder assy for the at car. I will have more pictures and such when I get it, and get the swap done.

PhatFreshPrince · 12-01-2021, 09:16 PM

You answered my question. This is great news! Please do post pics when your done and all part numbers.

Sent from my iPhone using Tapatalk

PhatFreshPrince · 12-04-2021, 09:05 AM

@dragoontwo, Could you tell me the part number of the cup holder assembly? I don't see it on the parts diagram. And how's the progress coming on redoing yours?

dragoontwo · 12-04-2021, 09:24 AM

92114CC000 I was waiting for my $500 Subaru voucher to come in for ordering the cupholder. I need to call customer care about that maybe today. I have been ordering everything from Subaru source since they have pretty good discounts.

PhatFreshPrince · 12-13-2021, 04:33 PM

I am having trouble finding where to put my phone, and it is driving me crazy. I can put it in the cupholder area and close the shuttle bay lids, but the cord will get pinched on the side stopping the lid from opening. I also cannot stand the cord coming out the top if I put the phone in the passenger seat. Whether, I put the phone in the cup holders in the center console, the door cup holder, or the passenger seat then I cannot use those things for what they were designed. I am thinking of knocking out this panel and routing my phone cord to the back of what is behind the panel. Has anyone had this part of the dash out to see if there is room behind this panel?

timurrrr · 12-13-2021, 04:49 PM

0:30 in this video:

Interceptor777 · 12-13-2021, 06:20 PM

Quote:

Originally Posted by PhatFreshPrince

I am having trouble finding where to put my phone, and it is driving me crazy. I can put it in the cupholder area and close the shuttle bay lids, but the cord will get pinched on the side stopping the lid from opening. I also cannot stand the cord coming out the top if I put the phone in the passenger seat. Whether, I put the phone in the cup holders in the center console, the door cup holder, or the passenger seat then I cannot use those things for what they were designed. I am thinking of knocking out this panel and routing my phone cord to the back of what is behind the panel. Has anyone had this part of the dash out to see if there is room behind this panel?

If there's space behind there and someone manages to make a 3D model of a little cubby, I can 3D print it and send it out for shipping cost for whoever wants one.

LanceLane174 · 12-14-2021, 06:59 PM

Quote:

Originally Posted by Interceptor777

If there's space behind there and someone manages to make a 3D model of a little cubby, I can 3D print it and send it out for shipping cost for whoever wants one.

I would be interested. I thought the car was offered with a phone charger. If so that's prob where they would put it.

PhatFreshPrince · 12-14-2021, 10:04 PM

Quote:

Originally Posted by LanceLane174

I would be interested. I thought the car was offered with a phone charger. If so that's prob where they would put it.

There are two USB ports in the cupholder area. I was wanted to add space for my phone in front of the gear shifter. There is room to put your phone there without the cover, but it is tight. It will stick in there straight, but it might get hot in there. Also, if I remove the cover then I can put my phone there sideways without it hitting the gear shifter. Man, just like 5 more mm and it would have worked.

LanceLane174 · 12-16-2021, 11:09 PM

Quote:

Originally Posted by PhatFreshPrince

There are two USB ports in the cupholder area. I was wanted to add space for my phone in front of the gear shifter. There is room to put your phone there without the cover, but it is tight. It will stick in there straight, but it might get hot in there. Also, if I remove the cover then I can put my phone there sideways without it hitting the gear shifter. Man, just like 5 more mm and it would have worked.

I could have sworn that they offered a wireless charger. If so where would that have gone. And my legacy it's exactly where you're talking about.

PhatFreshPrince · 12-17-2021, 07:18 AM

Quote:

Originally Posted by LanceLane174

I could have sworn that they offered a wireless charger. If so where would that have gone. And my legacy it's exactly where you're talking about.

Yes, wireless charging would have been nice. I think I am going to drop one of the USB connectors below the center console, and then connect a phone cable and route it to the glove box. The Apple CarPlay is nice, and I really don't need access to my phone itself when plugged into the car. Then the phone cable will not get caught in the cup holder bay doors... Oh and I can use my cup holder area as (I don't know) a cup holder!

PhatFreshPrince · 12-17-2021, 07:30 AM

Quote:

Originally Posted by LanceLane174

I could have sworn that they offered a wireless charger. If so where would that have gone. And my legacy it's exactly where you're talking about.

Yes, wireless charging would have been nice. I think I am going to drop one of the USB ports below the center console, and then connect a phone cable and route it to the glove box. The Apple CarPlay is nice, and I really don’t need access to my phone itself when plugged into the car. Then the phone cable will not get caught in the cup holder bay doors… Oh and I can use my cup holder area as (I don’t know) a cup holder!

Sent from my iPhone using Tapatalk

12-01-2021, 06:35 PM	#1
dragoontwo Senior Member Join Date: May 2020 Drives: 22 BRZ limited Location: Clarksville TN Posts: 1,198 Thanks: 219 Thanked 1,004 Times in 530 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	Center console I have a mt and I wanted the extra cupholder that comes on the at version. I ordered the at console section itself 92113CC010 to see how it differs. The cupholder section will not cross over and I will have to order one. The console section will fit into the mt car without issue. You just need the console, cupholder section and mats. I also ordered the foam pads that seem to be specific to the mt model. It looks like they will fit the at console just fine as well. I think they're there for noise.

12-13-2021, 04:33 PM	#7
PhatFreshPrince Senior Member Join Date: Sep 2021 Drives: 2022 BRZ Limited SBP Location: Georgia Posts: 219 Thanks: 125 Thanked 124 Times in 75 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	I am having trouble finding where to put my phone, and it is driving me crazy. I can put it in the cupholder area and close the shuttle bay lids, but the cord will get pinched on the side stopping the lid from opening. I also cannot stand the cord coming out the top if I put the phone in the passenger seat. Whether, I put the phone in the cup holders in the center console, the door cup holder, or the passenger seat then I cannot use those things for what they were designed. I am thinking of knocking out this panel and routing my phone cord to the back of what is behind the panel. Has anyone had this part of the dash out to see if there is room behind this panel? Attached Images

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Center console	orc	BRZ First-Gen (2012+) -- General Topics	11	09-27-2021 11:13 AM
My idea for a center arm rest / console cover / center cup holder	ravenblackfrs	Cosmetic Modification (Interior/Exterior/Lighting)	67	02-13-2016 03:00 PM
red center console?	gusbarragan	Cosmetic Modification (Interior/Exterior/Lighting)	13	02-19-2013 08:03 PM
Center Console help	mbh1101	Cosmetic Modification (Interior/Exterior/Lighting)	2	08-22-2012 09:56 AM
Center Console	encity5	Electronics \| Audio \| NAV \| Infotainment	1	06-10-2012 09:22 AM

12-01-2021, 07:29 PM	#2
PhatFreshPrince Senior Member Join Date: Sep 2021 Drives: 2022 BRZ Limited SBP Location: Georgia Posts: 219 Thanks: 125 Thanked 124 Times in 75 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Do you think it will fit into your manual car without cutting the existing console? I, too, was a little disappointed there were not more accessible cup holders.

12-01-2021, 08:15 PM	#3
dragoontwo Senior Member Join Date: May 2020 Drives: 22 BRZ limited Location: Clarksville TN Posts: 1,198 Thanks: 219 Thanked 1,004 Times in 530 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	I don't understand what you are asking. I said it does fit. I put it in the car to test for it already. I just need the cupholder assy for the at car. I will have more pictures and such when I get it, and get the swap done.

12-01-2021, 09:16 PM	#4
PhatFreshPrince Senior Member Join Date: Sep 2021 Drives: 2022 BRZ Limited SBP Location: Georgia Posts: 219 Thanks: 125 Thanked 124 Times in 75 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	You answered my question. This is great news! Please do post pics when your done and all part numbers. Sent from my iPhone using Tapatalk

12-04-2021, 09:05 AM	#5
PhatFreshPrince Senior Member Join Date: Sep 2021 Drives: 2022 BRZ Limited SBP Location: Georgia Posts: 219 Thanks: 125 Thanked 124 Times in 75 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	@dragoontwo, Could you tell me the part number of the cup holder assembly? I don't see it on the parts diagram. And how's the progress coming on redoing yours?

12-04-2021, 09:24 AM	#6
dragoontwo Senior Member Join Date: May 2020 Drives: 22 BRZ limited Location: Clarksville TN Posts: 1,198 Thanks: 219 Thanked 1,004 Times in 530 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	92114CC000 I was waiting for my $500 Subaru voucher to come in for ordering the cupholder. I need to call customer care about that maybe today. I have been ordering everything from Subaru source since they have pretty good discounts.

12-13-2021, 04:49 PM	#8
timurrrr Senior Member Join Date: May 2019 Drives: 2022 GR86 Location: Between Sonoma and Laguna Seca Posts: 1,717 Thanks: 2,135 Thanked 1,314 Times in 725 Posts Mentioned: 31 Post(s) Tagged: 1 Thread(s)	0:30 in this video:

User Name		Remember Me?
Password