Stock height + Aftermarket wheels compilation!!!!

[SStratos]

Originally Posted by GTB/ZR-1

Weds TC105N 17x9" +35 square setup on 245/40 Hankook R-S3s.

Not for long, as coil-overs have been ordered.

So no rubbing with your set up of 17X9" @ +35 offset? How much does it poke? If I found something that was 17 or 18X9" @ +38 or +40 offset would the inside of the wheel or tire rub on anything with the stock suspension and ride height?

Photos/link to photos of your 17X9" @ +35 please


Thanks Much!!!

[SStratos]

Originally Posted by SUB-FT86

My Asphalt on 18x9 +42 Konig Oversteer with 225/40/18. It will be dropped next week though.

http://http://http://http://

Your 18x9" @ +42 offset on stock suspension and springs has no issues with rubbing at or before full lock?


Cheers

[SStratos]

Originally Posted by BoxRZ_86

Enkei RPF1 17x9 +45, 245/40r17 I believe.

Any problems rubbing, using your 17x9" +45 with stock suspension?

[BoxRZ_86]

no rubbing issues.

[Anthonyc77]

Avid.1 AV32 18x8.5 +35 / Pilot Super Sports 235/40/18

[androopoo]

here’s my brz on wrx stock wheels and stock suspension!



Sent from my iPhone using Tapatalk

[Nickel]

Nooo, go away monster trucks.

[57EW]

Remember seeing this thread ages ago and i figured i'd post up my set up

Rays Gramlights 57xtreme 18 x 8.5 +42

[Jordanwolf]

Originally Posted by BoxRZ_86

no rubbing issues.

How is this possible to be completely stock on 17x9 +45. I swear people have reported rubbing with that size, different wheels though.

[BoxRZ_86]

Originally Posted by Jordanwolf

How is this possible to be completely stock on 17x9 +45. I swear people have reported rubbing with that size, different wheels though.

I have had them for 3 years now. and every winter when I swap them I inspect them for any signs of rubbing. cause I never hear or feel anything rub and so far I have seen zero sign of any rubbing. I have notice when the car is jacked up in the air and the suspension is at full extension the wheel just touches the spring perch. but when on the ground it has clearance. maybe that is what people are referring to when they say they rub.

[Jordanwolf]

Originally Posted by BoxRZ_86

I have had them for 3 years now. and every winter when I swap them I inspect them for any signs of rubbing. cause I never hear or feel anything rub and so far I have seen zero sign of any rubbing. I have notice when the car is jacked up in the air and the suspension is at full extension the wheel just touches the spring perch. but when on the ground it has clearance. maybe that is what people are referring to when they say they rub.

This gives me faith for +45 then. I was originally looking to try and get an offset closer to +38-+40, but yours looks pretty good.

[JDngr]

18" Sparco Assetto Gara, 225 Michellin PS4s, stock ride height.

My ride, but not my photo.

[Relyt86]

I'm thinking of getting a 18x8.5 wheel (I don't know the offset i want; I want to be flush, if anyone knows a good offset for this size, Please tell me) (Also on stock suspension)

The tire size I'm thinking of is a 245/40/18 or a 245/35/18

I don't know which tire size would be better for fitment.

Please tell me which is best, thank you!

[StraightOuttaCanadaEh]

Originally Posted by Relyt86

I'm thinking of getting a 18x8.5 wheel (I don't know the offset i want; I want to be flush, if anyone knows a good offset for this size, Please tell me) (Also on stock suspension)

The tire size I'm thinking of is a 245/40/18 or a 245/35/18

I don't know which tire size would be better for fitment.

Please tell me which is best, thank you!

I saw a guy on 18x9 at a local car meet and he was perfectly flush. I have 18x8.5 and I still need I'm guessing a 20-25 mm spacer to be flush, so go for 9. Mind the extra weight, it goes without saying.