OFT is reading crazy numbers!

[Nobunnyhere.86]

hey guys , so I am super worried about driving my car right now and I have work in the morning so I hope to get as much advice as possible. MY OFT is reading -100 on the FLKC , 0 on the MAF Voltage , and LTFT is reading high as if I am running rich !

my set up is : Catless EL headers , stock OP , catless front pipe, and a axleback exhaust. I have a stock intake but cut the nose of it open to get a little better air flow.

also I am running stage 2 EL E85 tune .

here is a datazap if needed to see what I am talking about . Thanks once again and I hope I can get this fixed before I ruin the car


http://www.datazap.me/u/nobunnyhere8...s?log=0&data=1

[Hiko]

Guessing this is a newer bin? I've got the same thing happening with my f40c 2016, looking into it it seems it's a known issue with the OFT.

[Nobunnyhere.86]

Originally Posted by Hiko

Guessing this is a newer bin? I've got the same thing happening with my f40c 2016, looking into it it seems it's a known issue with the OFT.

indeed it is a 40C , 2016 scion frs. is it something I should be worried about? I am waiting to go empty from E85 to flash back to stock tune to be safe. have you found any reason? I thought it could be a faulty MAF sensor? or I have a leak somewhere.

[Hiko]

Sorry, I should've been more specific. AFAIK, this is an OFT issue with data-logging our newer ECU's. I don't think it's indicative of a real problem with the car though.

[Nobunnyhere.86]

Originally Posted by Hiko

Sorry, I should've been more specific. AFAIK, this is an OFT issue with data-logging our newer ECU's. I don't think it's indicative of a real problem with the car though.

So Should i contact the oft guys and ask them about the issue??

[Nobunnyhere.86]

Originally Posted by Hiko

Sorry, I should've been more specific. AFAIK, this is an OFT issue with data-logging our newer ECU's. I don't think it's indicative of a real problem with the car though.

So you are right . .i just got off the phone with the OFT guys they said it is an issue with the data logging on the OFT for our newer cars and he said he was going to send me new data logs to upload. as far as my 0 voltage for MAF he said he has no clue and will look into the email i had sent him when he gets the chance . if i find out more i will also keep everyone posted.