|
Suspension | Chassis | Brakes -- Sponsored by 949 Racing Relating to suspension, chassis, and brakes. Sponsored by 949 Racing. |
|
Thread Tools | Search this Thread |
03-27-2024, 06:02 PM | #43 | |
Member
Join Date: Aug 2018
Drives: 19’ GT86
Location: Europe
Posts: 32
Thanks: 14
Thanked 21 Times in 12 Posts
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
|
Quote:
I have the following setup: Front: rebound 10 clicks from full stiff, bump 7 clicks from full stiff Rear: rebound 9 clicks from full stiff, bump 8 clicks from full stiff I have aprox. 40mm lowered (and had to jack up the front quite a bit). The ride quality is great with this setup. Can you show a picture of your front coils? I found it very weird as my fronts were actually really easy to slam. Last edited by KiK; 03-27-2024 at 06:27 PM. |
|
The Following 2 Users Say Thank You to KiK For This Useful Post: | J95 (04-02-2024), Racecomp Engineering (03-28-2024) |
09-26-2024, 07:36 PM | #44 | |
Senior Member
Join Date: Dec 2018
Drives: BRZ
Location: ES
Posts: 107
Thanks: 192
Thanked 15 Times in 13 Posts
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
|
Quote:
https://photos.app.goo.gl/U9aT4CpyUpKjWQY27 At this perch height, I get -26mm drop (340mm wheel hub to fender), and I measured aprox. 32mm of bump travel to the "start" of bumpstop, and 43mm droop It's like the cs top mounts behave the same height as oem mounts. Quite confusing since already 3 persons in this thread agree obtaining a different result @marco_mc22 @Racecomp Engineering |
|
10-04-2024, 05:19 AM | #45 |
Senior Member
Join Date: Nov 2017
Drives: 17 BRZ ,21 GR Yaris, 23 GR86
Location: Poland
Posts: 163
Thanks: 413
Thanked 144 Times in 83 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
Kind of late but here's the pic I promised
|
The Following User Says Thank You to MrSkubi For This Useful Post: | J95 (10-05-2024) |
10-05-2024, 01:32 PM | #46 |
Senior Member
Join Date: Dec 2018
Drives: BRZ
Location: ES
Posts: 107
Thanks: 192
Thanked 15 Times in 13 Posts
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
|
cool thanks. At the end, I took the coilover to a shop to make sure everything is in order, and it is apparently. I put the ride height at F 331mm/R 340mm and it should be ok. I measured front droop and calculated that bump travel might be around 25-28 mm at the spring
Probably the CS top mounts don't add more than 5mm of bump travel @KiK did you refine your bump/rebound adjustment? |
|
|
Thread Tools | Search this Thread |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
KW Clubsport 3-way Valving | TRAKRAVN | Suspension | Chassis | Brakes -- Sponsored by 949 Racing | 7 | 12-20-2019 11:45 PM |
Using KW Clubsport top mounts for KW V3 | thpark93 | Suspension | Chassis | Brakes -- Sponsored by 949 Racing | 2 | 03-20-2019 12:39 PM |
Tein SRC vs. KW clubsport | 86wtywly | Suspension | Chassis | Brakes -- Sponsored by 949 Racing | 17 | 04-02-2017 05:55 PM |