DIY-Scratch & Dent - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

FirestormFRS · 06-04-2014, 04:44 PM

Note to all you professional paint and body guys I know there is probably some easier/better way. I took this on due to the $48hr labor and 100% mark up on supplies.

Riding to work one morning and a muffler clamp flew from under the car in front of me, skiddered across the concrete and flew up. The clamp mangled my right front fender. Body shop quotes $460-$602 to repair. I decided to tackle it myself.

1. Sand, Fill, Prime the three nasty dents and scratches. I used 240 grit to get the scratches. Used self etching primer on the one due to it being to the metal. Used glazing putty to fill the voids.

2. Shot the entire area with filler/primer combo. Sanded with 400 then wet sanded with 1000.

3. Shot three coats of base coat. I used touch up direct matched to the car. I tried scratch wizards and it didn't match. Wasn't even close. Yes this was shot with a rattle can.

4. Removed the vent garnish and used a gray scotchbrite pad to scuff the entire fender. I know you can blend clear but you can't with rattle cans and it's easier this way. I did use the crease at the bottom as a stop point.

5. Important part. I used SprayMax 2k rattle can clearcoat. Don't use the cheap stuff. The clear is $28 a can but it's two part epoxy clear and will go on better and stand up better.

6. Wet sanded with 1200, then 1500, then 3k to remove the orange peel and got it as smooth as I could. Match was perfect and red is supposed to be difficult to blend. Maybe I got lucky.

7. Used Meguires ultimate compound and hexlogic orange pad with DA polisher to take out the sand marks. Then polished with Mequires ultimate polish and hexlogic green pad to polish.

Could a body shop do it better. Absolutely. Could I have done better. Sure. I learned a lot in the process and saved a lot of money doing it myself. Total cost $125 with paint, clear, primer, sandpaper, and chemicals.

vividracing · 06-04-2014, 04:49 PM

Looks good. Someday, I'll grow some balls and tackle paint myself.

Turbo95eg6 · 06-04-2014, 04:52 PM

We prob need better daylight after pics to prove "perfect" match.

Kimsey47 · 06-04-2014, 05:02 PM

Daylight or not, I applaud your massive balls. Well done sir!

ScorpionOzzy · 06-04-2014, 06:43 PM

well done! I definitely wouldn't have the guts to do this stuff, but props to you .

l0aded · 06-13-2014, 04:50 AM

will sanding remove dents?

Yrr · 06-13-2014, 05:03 AM

Great job!

ZionsWrath · 06-13-2014, 05:17 AM

Quote:

Originally Posted by l0aded

will sanding remove dents?

no you need to fill them or pop them out. sand the dent so the filler bonds better

SloS14 · 06-13-2014, 09:09 AM

dude....nice work.

06-04-2014, 04:44 PM	#1
FirestormFRS Senior Member Join Date: Jul 2012 Drives: 2013 FR-S Location: Anytown Posts: 920 Thanks: 73 Thanked 641 Times in 302 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	DIY-Scratch & Dent Note to all you professional paint and body guys I know there is probably some easier/better way. I took this on due to the $48hr labor and 100% mark up on supplies. Riding to work one morning and a muffler clamp flew from under the car in front of me, skiddered across the concrete and flew up. The clamp mangled my right front fender. Body shop quotes $460-$602 to repair. I decided to tackle it myself. 1. Sand, Fill, Prime the three nasty dents and scratches. I used 240 grit to get the scratches. Used self etching primer on the one due to it being to the metal. Used glazing putty to fill the voids. 2. Shot the entire area with filler/primer combo. Sanded with 400 then wet sanded with 1000. 3. Shot three coats of base coat. I used touch up direct matched to the car. I tried scratch wizards and it didn't match. Wasn't even close. Yes this was shot with a rattle can. 4. Removed the vent garnish and used a gray scotchbrite pad to scuff the entire fender. I know you can blend clear but you can't with rattle cans and it's easier this way. I did use the crease at the bottom as a stop point. 5. Important part. I used SprayMax 2k rattle can clearcoat. Don't use the cheap stuff. The clear is $28 a can but it's two part epoxy clear and will go on better and stand up better. 6. Wet sanded with 1200, then 1500, then 3k to remove the orange peel and got it as smooth as I could. Match was perfect and red is supposed to be difficult to blend. Maybe I got lucky. 7. Used Meguires ultimate compound and hexlogic orange pad with DA polisher to take out the sand marks. Then polished with Mequires ultimate polish and hexlogic green pad to polish. Could a body shop do it better. Absolutely. Could I have done better. Sure. I learned a lot in the process and saved a lot of money doing it myself. Total cost $125 with paint, clear, primer, sandpaper, and chemicals.

06-04-2014, 05:02 PM	#4
Kimsey47 Senior Member Join Date: Mar 2012 Drives: 2016 STI DGM Location: Chattanooga, TN Posts: 1,875 Thanks: 1,189 Thanked 1,460 Times in 662 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	Daylight or not, I applaud your massive balls. Well done sir! __________________ Subaru STI :

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dent :( Will paintless dent removal be able to get this out?	Greg_Di	CANADA	22	08-31-2013 11:22 PM
I got a slight scratch dent...	SPEEDGOD	Cosmetic Maintenance (Wash, Wax, Detailing, Body Repairs)	9	02-26-2013 11:37 AM
dent / scratch repair	encity5	NY / NJ / CT / PA	1	12-12-2012 09:09 PM
Scratch/Dent Bespoke Unit $340 Shipped	Hanakuso	Audio/Visual, Electronics, Infotainment, NAV	1	11-05-2012 05:20 PM
Scratch + dent on rear quarter panel - fix or no?	rawbz	Cosmetic Maintenance (Wash, Wax, Detailing, Body Repairs)	10	08-26-2012 11:50 AM

06-04-2014, 04:49 PM	#2
vividracing Join Date: May 2012 Drives: 2013 Scion FR-S Location: Gilbert, Arizona Posts: 2,593 Thanks: 491 Thanked 1,065 Times in 617 Posts Mentioned: 49 Post(s) Tagged: 3 Thread(s)	Looks good. Someday, I'll grow some balls and tackle paint myself.

06-04-2014, 04:52 PM	#3
Turbo95eg6 Senior Member Join Date: Nov 2013 Drives: 2014 BRZ SWP LTD Location: The 503 Posts: 2,174 Thanks: 331 Thanked 2,266 Times in 858 Posts Mentioned: 18 Post(s) Tagged: 3 Thread(s)	We prob need better daylight after pics to prove "perfect" match.

06-04-2014, 06:43 PM	#5
ScorpionOzzy Member Join Date: Sep 2013 Drives: Scion FR-S Location: Miami Posts: 87 Thanks: 11 Thanked 30 Times in 21 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	well done! I definitely wouldn't have the guts to do this stuff, but props to you .

06-13-2014, 05:03 AM	#7
Yrr Member Join Date: Apr 2014 Drives: Toyota GT86 Location: The Netherlands Posts: 40 Thanks: 64 Thanked 23 Times in 7 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Great job!

06-13-2014, 09:09 AM	#9
SloS14 Senior Member Join Date: Apr 2013 Drives: 2013 FR-S whiteout Location: United States Posts: 726 Thanks: 381 Thanked 651 Times in 256 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	dude....nice work.

User Name		Remember Me?
Password