Innovate Stage 2 base tune for FRS? Any Help?

[markzellers]

Greetings, I recently purchased a used Innovate Stage 2 kit and installed it. I have an Ecutek license, but need to get a base tune so I can drive it to a tuner. Can anyone help?


Thanks in advance!

[steve99]

Originally Posted by markzellers

Greetings, I recently purchased a used Innovate Stage 2 kit and installed it. I have an Ecutek license, but need to get a base tune so I can drive it to a tuner. Can anyone help?


Thanks in advance!

shouldn't your tuner have a base map ?

deliceous and moto-east tuning likely have a flash and go map for those kits

is your kit a sprintex 210 intercooled with 69mm pulley ?

[COO86L]

I have a base tune (and so does Steve) for the 210+ / SPS kit with 69mm pulley if you need.

Alternatively, and this is at your own risk and depending how far you have to drive, you _can_ drive it on the standard N/A tune. It actually doesn't drive terrible. Of course, normal driving, no redlining etc. I drove mine on the N/A tune for a couple days, no worries. Again, at your own risk.

[continuecrushing]

Originally Posted by markzellers

Greetings, I recently purchased a used Innovate Stage 2 kit and installed it. I have an Ecutek license, but need to get a base tune so I can drive it to a tuner. Can anyone help?


Thanks in advance!

@DeliciousTuning is what I'm using for mine, highly recommend them

[Celadrielas]

Originally Posted by steve99

shouldn't your tuner have a base map ?

deliceous and moto-east tuning likely have a flash and go map for those kits

is your kit a sprintex 210 intercooled with 69mm pulley ?

He bought the kit used and it didn't come with a base map (He's local here in AZ). We've been trying to find a tuner for him but local it's been hard. One of our main tuners is *REALLY* sick which has caused some down time.

[COO86L]

Originally Posted by Celadrielas

He bought the kit used and it didn't come with a base map (He's local here in AZ). We've been trying to find a tuner for him but local it's been hard. One of our main tuners is *REALLY* sick which has caused some down time.

I may be able to help. Possibly. If you or someone has access to a tactrix cable, I have an A01G ROM file for the Sprintex with 69mm pulley on a 210+ /SPS kit with intercooler.

OR

I have a Powergate 3 unit from Sprintex that they can configure the tune for, and use it to upload onto the ECU. It works the same as the OFT, but no, you can't turn it into an OFT later (already asked Shiv).

I'm happy to sell the Powergate unit as I'm now using EcuTek. That will allow Sprintex to do whichever tune is required for his car, weed out any issues with the tune etc etc. Only issue is I'm in Aus, so shipping might be deadly.

[Toyota86.ir]

Originally Posted by markzellers

Greetings, I recently purchased a used Innovate Stage 2 kit and installed it. I have an Ecutek license, but need to get a base tune so I can drive it to a tuner. Can anyone help?


Thanks in advance!

The best tune we flashed is Mike tune from moto-east.