Hey guys I need help with a code - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Loganp98 · 10-20-2023, 06:17 PM

My 15 BRZ has code P2109. I can’t figure out why. I tried a test throttle body and a test PCM. The code won’t clear with my OFT and the battery disconnected. It popped up after I had reinstalled the intake manifold. I’ve checked no wires are pinched. Thanks

humfrz · 10-22-2023, 01:41 AM

Quote:

Originally Posted by Loganp98

My 15 BRZ has code P2109. I can’t figure out why. I tried a test throttle body and a test PCM. The code won’t clear with my OFT and the battery disconnected. It popped up after I had reinstalled the intake manifold. I’ve checked no wires are pinched. Thanks

I checked with Bubba and he says to disconnect the negative battery terminal, have a beer, after about 5 minutes reconnect the battery.

Maybe it will reset -

https://studentlesson.com/how-to-res...sition-sensor/

RZNT4R · 10-22-2023, 04:07 PM

Instead of trying parts, try a scan tool to read live data. You need to know the throttle plate position.

One of the following conditions is met (1 trip detection logic):

The throttle position sensor opening angle when learning the fully-closed position is less than -4.02% or more than 4.02%.
When the throttle actuator current is off, the difference between the actual throttle position and the fully-closed position is less than 0.93%.

Opie · 10-25-2023, 10:52 AM

Factory diagnostic steps below, is P2109 the only code set?

Loganp98 · 10-30-2023, 04:52 PM

Quote:

Originally Posted by Opie

Factory diagnostic steps below, is P2109 the only code set?

Yeah only one on is P2109. Throttle % on my scan tool is stuck at 5%

Opie · 10-31-2023, 03:22 PM

And you said you've tried a known good throttle body against the one currently in the car? If so, It's got to be damage on the engine harness somewhere.

Loganp98 · 10-31-2023, 09:44 PM

Quote:

Originally Posted by Opie

And you said you've tried a known good throttle body against the one currently in the car? If so, It's got to be damage on the engine harness somewhere.

Can’t 100% confirm if it is good considering i bought it used. I hate to spend the money on a brand new one considering I bought a grams throttle body for this thing not too long ago. But I won’t know for sure until I buy a new one 😕

Opie · 11-01-2023, 08:07 AM

Have you looked at the pins on the throttle body harness connector, make sure none are bent or missing?

10-20-2023, 06:17 PM	#1
Loganp98 Member Join Date: Feb 2020 Drives: White Subaru brz Location: North Carolina Posts: 19 Thanks: 0 Thanked 3 Times in 3 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Hey guys I need help with a code My 15 BRZ has code P2109. I can’t figure out why. I tried a test throttle body and a test PCM. The code won’t clear with my OFT and the battery disconnected. It popped up after I had reinstalled the intake manifold. I’ve checked no wires are pinched. Thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY - Color Code of ID plate and code of part (SUBARU) - SB18-091	Trap63	DIY (Do-It-Yourself) Guides	0	06-14-2018 04:52 AM
p0462 fuel level sensor code. anyone else ran into this code	georgiafrsguy	Engine, Exhaust, Transmission	1	02-28-2017 08:28 PM
Lean Code and 02 Code diagnostics.	Kiske	Engine, Exhaust, Transmission	12	04-28-2016 10:19 PM
CEL code	ChandlerSwyng	Issues \| Warranty \| Recalls / TSB	2	04-08-2014 01:27 AM
BC Coilover settings you guys guys ride on	g0lden	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	26	04-06-2014 06:56 PM

10-22-2023, 04:07 PM	#3
RZNT4R Professional Mechanic Join Date: Apr 2010 Drives: 2017 86 6MT Oceanic Location: Quebec, Canada Posts: 789 Thanks: 17 Thanked 633 Times in 371 Posts Mentioned: 12 Post(s) Tagged: 0 Thread(s)	Instead of trying parts, try a scan tool to read live data. You need to know the throttle plate position. One of the following conditions is met (1 trip detection logic): The throttle position sensor opening angle when learning the fully-closed position is less than -4.02% or more than 4.02%. When the throttle actuator current is off, the difference between the actual throttle position and the fully-closed position is less than 0.93%.

User Name		Remember Me?
Password