Stock height + Aftermarket wheels compilation!!!! - Page 9 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

BoxRZ_86 · 11-17-2015, 08:42 AM

Enkei RPF1 17x9 +45, 245/40r17 I believe.

alxtheoreo · 11-17-2015, 11:23 AM

Quote:

Originally Posted by BoxRZ_86

Enkei RPF1 17x9 +45, 245/40r17 I believe.

How much does it poke out in the front & rear?

Sent from my SCH-I545 using Tapatalk

BoxRZ_86 · 11-17-2015, 12:29 PM

Quote:

Originally Posted by alxtheoreo

How much does it poke out in the front & rear?

None, its sits pretty flush.

BoxRZ_86 · 11-19-2015, 11:51 AM

Quote:

Originally Posted by alxtheoreo

How much does it poke out in the front & rear?

I took a photo this morning to show the poke/flush of my setup.
Name: ImageUploadedByTapatalk1447951821.728958.jpg
Views: 6789
Size: 299.6 KB

Name: ImageUploadedByTapatalk1447951854.916980.jpg
Views: 6791
Size: 293.9 KB

alxtheoreo · 11-19-2015, 11:59 AM

Quote:

Originally Posted by BoxRZ_86

I took a photo this morning to show the poke/flush of my setup.
Attachment 125393
Attachment 125394

I love it. Thank you!

I'm considering this set up, or Mach V Awesome wheels for next spring (+42 offset).

Do you have any rubbing at full lock?

Sent from my SCH-I545 using Tapatalk

BoxRZ_86 · 11-19-2015, 12:02 PM

Quote:

Originally Posted by alxtheoreo

I love it. Thank you!

I'm considering this set up, or Mach V Awesome wheels for next spring (+42 offset).

Do you have any rubbing at full lock?

No rubbing at full lock. But the inner barrel of the wheel slightly touches the spring perch now and then. I don't hear it or feel it but when you take off the wheel you can see a slight mark on the wheel from it touching. I will probably use a 3mm spacer on the front soon.

Sent from my iPhone using Tapatalk

Parks_ · 11-19-2015, 12:28 PM

XXR 530's 17x7 +35 on stock wheels. Not the best picture of stock height. I would take more but I am in the process or installing my Eibach Sportline kit.

YamahaR86 · 11-19-2015, 01:43 PM

.

Here2rock · 11-19-2015, 05:39 PM

Quote:

Originally Posted by YamahaR86

.

Very nice, a bit different to others, I like it. What are the specs?

YamahaR86 · 11-19-2015, 08:12 PM

Quote:

Originally Posted by Here2rock

Very nice, a bit different to others, I like it. What are the specs?

Thanks. Not entirely different, they're knock off wheels but for my first aftermarket wheel I think they're fine.

17" +35. Tire is 225/45/17

stevesnj · 11-19-2015, 08:38 PM

They fit the car perfect IMHO @YamahaR86

YamahaR86 · 11-19-2015, 09:32 PM

Quote:

Originally Posted by stevesnj

They fit the car perfect IMHO @YamahaR86

Thanks man. Means a lot. I'm not satisfied though (who is?) , want to get rid of some of that wheel well gap so I considered lowering an inch to close it. At the same time I want a lip kit so that's so low.

Think I finally decided to get meaty tires to cover the well and a lip kit.

stevesnj · 11-19-2015, 09:37 PM

I'd say a minor drop, eibach pro/TRD lowering. They are the same slightly under an inch and would make it so you could put a lip on too.

YamahaR86 · 11-19-2015, 10:58 PM

Quote:

Originally Posted by stevesnj

I'd say a minor drop, eibach pro/TRD lowering. They are the same slightly under an inch and would make it so you could put a lip on too.

I was researching Springs as well. Rce yellows . 08 or trd which is 1". Was going to go with trd but think I'll get the lip first to see how much I'm willing to commit after its on. Will be posting pictures here again once I got it to show the ground clearance since it's still stock height.

11-19-2015, 01:43 PM	#120
YamahaR86 JDM Vaping Stance Nation Join Date: May 2013 Drives: 2013 White Location: FL Posts: 710 Thanks: 647 Thanked 345 Times in 218 Posts Mentioned: 14 Post(s) Tagged: 2 Thread(s)	. Attached Images

11-19-2015, 08:38 PM	#123
stevesnj Senior Member Join Date: May 2013 Drives: 2016 FR-S Oceanic Blue Location: Southern NJ Posts: 2,958 Thanks: 2,158 Thanked 1,601 Times in 923 Posts Mentioned: 30 Post(s) Tagged: 2 Thread(s)	They fit the car perfect IMHO @YamahaR86 __________________ My 2016 Build thread TRD Exhaust with custom quad tips, TRD Lowering Springs,TRD Quick shifter,LED;DRL, Projectors, and turn signals. Re-badge, 86 Nanny, WinmaxW2 Pads, K&N Drop In, Antenna delete

11-19-2015, 09:37 PM	#125
stevesnj Senior Member Join Date: May 2013 Drives: 2016 FR-S Oceanic Blue Location: Southern NJ Posts: 2,958 Thanks: 2,158 Thanked 1,601 Times in 923 Posts Mentioned: 30 Post(s) Tagged: 2 Thread(s)	I'd say a minor drop, eibach pro/TRD lowering. They are the same slightly under an inch and would make it so you could put a lip on too. __________________ My 2016 Build thread TRD Exhaust with custom quad tips, TRD Lowering Springs,TRD Quick shifter,LED;DRL, Projectors, and turn signals. Re-badge, 86 Nanny, WinmaxW2 Pads, K&N Drop In, Antenna delete

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Aftermarket lug nuts on stock wheels: confirm?	empower-auto	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	27	09-19-2018 07:38 PM
Aftermarket wheels with stock suspension	Thongpocket	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	8	01-24-2013 05:08 PM
Stock TPMS's with aftermarket valves/wheels?	Phaedrus29	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	3	08-17-2012 01:18 PM
Need help with Stock height measurement	D1cker	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	10	08-03-2012 03:30 AM
Aftermarket wheels on stock BRZ/86s	yajin	BRZ Photos, Videos, Wallpapers, Gallery Forum	2	05-01-2012 02:52 AM

11-17-2015, 08:42 AM	#113
BoxRZ_86 Senior Member Join Date: May 2012 Drives: 2013 Subaru BRZ Limited SWP Location: Central NJ Posts: 369 Thanks: 51 Thanked 221 Times in 118 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Enkei RPF1 17x9 +45, 245/40r17 I believe.

11-19-2015, 12:28 PM	#119
Parks_ Member Join Date: Sep 2015 Drives: 2015 Steel Scion FR-S Location: Albertville, AL Posts: 13 Thanks: 0 Thanked 6 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	XXR 530's 17x7 +35 on stock wheels. Not the best picture of stock height. I would take more but I am in the process or installing my Eibach Sportline kit.

User Name		Remember Me?
Password