OFH and loose O2 sensor, fuel in oil

[FRSBRZGT86FAN]

Originally Posted by travisb

I have an updated log from today. I was able to get the sensors threaded nicely into the header. Hopefully it will stay that way.

Old log:
http://datazap.me/u/travis23832/1-o2...zoom=3184-4008

New log:
http://datazap.me/u/travis23832/2016...zoom=2679-2744

This is already zoomed in to a 3rd gear pull. For some reason I had some data drops where everything set to zero. I noticed one time when I glanced at the OFT the screen flickered off and on real quick. Maybe the cable was a little loose.

Anyway, this log looks better to me. But I am definitely not an expert. Let me know what you think.

Edit - I also logged the wideband AFR this time and it stayed at 18 the entire time.

Thanks!

That looks much better, do one more aggressive 1000 rpm to 7000 rpm datalog with constant pulls, you IAMs are fine so knock isn't effecting the motor also your commanded afr and AFR match much better. The problem is I couldn't see much as you were for the most part below 4000 rpm