So how do you fix this? SPC LCA with Stance coilovers - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Clint_1111 · 06-07-2015, 09:23 PM

So I had initially installed the SPC rear LCA and Stance coilovers with success. I went to adjust the ride height in the rear and started to unbolt the hub, sway bar and strut. Adjusted the rear ride height to where I wanted it and now I can't get the rear LCA to line up to the Hub at all. Spent a few hours trying different combinations on getting it aligned properly and it just wasn't working out. I even took the coilover off completely to see if that what was causing the issue and I couldn't get the LCA to line up. Any help or ideas appreciated. I'm hoping it's something simple I'm overlooking. Thanks.

Spinning Sushi · 06-07-2015, 09:50 PM

This happened to me after I installed my Cusco LCA's. I used a pry bar and a jack to help move it around. I had to pry and pull pretty hard then I bolted up the hub. I then jacked up the hub some more to get the coilover in.

Vroomin86 · 06-07-2015, 11:35 PM

Jack up the arm. Use a thick screwdriver and put it through. Make sure you use a piece of wood so you don't damage the arm.

06-07-2015, 09:23 PM	#1
Clint_1111 Member Join Date: Apr 2015 Drives: 2013 Asphalt FRS/2007' STI Location: Friant, CA Posts: 42 Thanks: 4 Thanked 27 Times in 20 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	So how do you fix this? SPC LCA with Stance coilovers So I had initially installed the SPC rear LCA and Stance coilovers with success. I went to adjust the ride height in the rear and started to unbolt the hub, sway bar and strut. Adjusted the rear ride height to where I wanted it and now I can't get the rear LCA to line up to the Hub at all. Spent a few hours trying different combinations on getting it aligned properly and it just wasn't working out. I even took the coilover off completely to see if that what was causing the issue and I couldn't get the LCA to line up. Any help or ideas appreciated. I'm hoping it's something simple I'm overlooking. Thanks.

06-07-2015, 11:35 PM	#3
Vroomin86 Senior Member Join Date: Mar 2015 Drives: 2015 Fire Location: South FLo-Rida Posts: 447 Thanks: 264 Thanked 168 Times in 106 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Jack up the arm. Use a thick screwdriver and put it through. Make sure you use a piece of wood so you don't damage the arm. __________________ 2015 FireStorm FRS HT Auto / TRD / Toms / FA 500 / Valenti / SPC / OFT / Borla / Flossy / Vigilant Motorsports / To be continued...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
* BC Racing BR Coilovers & Stance Super Sport Coilovers \| IN STOCK \| FAST SHIPPING *	Speed Element	Brakes, Suspension, Chassis	21	03-03-2014 08:56 PM
FS: (IL) KW Variant 3 coilovers and Stance Super Sport Coilovers	ill roller	Brakes, Suspension, Chassis	5	12-14-2013 03:02 PM

User Name		Remember Me?
Password