FS: 2013 FA20 engine w/spun bearing - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Bullnettles · 03-15-2017, 01:04 PM

50 miles on the coils and plugs, low-end knock. Had a shop do the plugs and an oil change, ended up putting a junkyard motor in it. Please allow a week or so for me to get it shipped, since it's back home in the shop. Asking $1,000 + shipping. Was running (roughly) still when pulled so I have no reason to believe the heads are damaged in any way, includes everything FA20 related in the pictures.

ichitaka05 · 03-16-2017, 12:08 PM

Please follow the Member Classified Rules (#2) or I'll delete the thread.

Quote:

2. You must post AT LEAST ONE picture of the item(s) for sale with a sign included in the photo. On the sign, should be your username, date and the words FT86Club.com on it. It can be handwritten or printed on a piece of paper. No photoshopped signs will be accepted.

Thanks,

ichi

Bullnettles · 03-16-2017, 12:42 PM

Will get my mom to do it when she gets home from work. Sorry about that.

Bullnettles · 03-16-2017, 07:49 PM

3D1 · 04-03-2017, 09:06 PM

How much to ship to 50501?

Bullnettles · 04-03-2017, 11:53 PM

I'll check tomorrow. I can ship after Easter easiest, will that work for you?

3D1 · 04-04-2017, 06:54 PM

That works. Can you give me some more information about the engine?

Bullnettles · 04-05-2017, 08:24 AM

Work got insane, sorry for the delay. I've put in a request for a freight quote with my warehouse manager. Motor has only had bolt-ons and tune, had a code for a bad coil. Took it in, on the way home I got a CEL that I can't recall, but it was blinking and the motor seemed out of sync. Reset, started it, seemed 100%. Drove it home, then the next morning I started it and it knocked for maybe a second, then evened out. Was going to drive it to the shop that did the coil, and it started knocking hard on the way in w/low oil pressure light. Killed it immediately and took it to the shop that put in the coil. They took no responsibility. Buddy from back home was off for a few days, so he came and grabbed it and took it to my shop back home and we put a junkyard motor in it. The oil filter had brass shavings in it, but we did NOT want to tear into the engine to see anything else. Seems more complicated than we were wanting to deal with.

Bullnettles · 04-05-2017, 08:42 AM

YRC FREIGHT- 4 DAYS, 264.76
R&L CARRIERS-2 DAYS, 274.82
SAIA- 2 DAYS, 286.70

3D1 · 04-05-2017, 06:39 PM

I'm interested. Send me a PM so we can work out the details.

03-15-2017, 01:04 PM	#1
Bullnettles Senior Member Join Date: Apr 2013 Drives: Scion FR-S 2013 Location: Houston, TX Posts: 257 Thanks: 89 Thanked 32 Times in 26 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	FS: 2013 FA20 engine w/spun bearing 50 miles on the coils and plugs, low-end knock. Had a shop do the plugs and an oil change, ended up putting a junkyard motor in it. Please allow a week or so for me to get it shipped, since it's back home in the shop. Asking $1,000 + shipping. Was running (roughly) still when pulled so I have no reason to believe the heads are damaged in any way, includes everything FA20 related in the pictures.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stock Motor is Toast (Spun Rod Bearing)	DFW-FRS	Issues \| Warranty \| Recalls / TSB	78	02-13-2018 11:56 AM
Engine failure - Spun rod bearing TWICE	dinoniel	Issues \| Warranty \| Recalls / TSB	38	11-07-2016 01:17 PM
Spun Rod Bearing #4	KE70	Issues \| Warranty \| Recalls / TSB	13	07-05-2016 03:17 PM
Likely hood of a spun bearing	aquaman	Engine, Exhaust, Transmission	14	02-24-2016 01:37 PM
FA20 Engine Wins Ward's 10 Best Engines of 2013	Jeffsu350	Scion FR-S / Toyota 86 GT86 General Forum	111	03-15-2015 03:39 AM

03-16-2017, 12:42 PM	#3
Bullnettles Senior Member Join Date: Apr 2013 Drives: Scion FR-S 2013 Location: Houston, TX Posts: 257 Thanks: 89 Thanked 32 Times in 26 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Will get my mom to do it when she gets home from work. Sorry about that.

03-16-2017, 07:49 PM	#4
Bullnettles Senior Member Join Date: Apr 2013 Drives: Scion FR-S 2013 Location: Houston, TX Posts: 257 Thanks: 89 Thanked 32 Times in 26 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)

04-03-2017, 09:06 PM	#5
3D1 Junior Member Join Date: Feb 2016 Drives: Scion FRS Location: Iowa Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	How much to ship to 50501?

04-03-2017, 11:53 PM	#6
Bullnettles Senior Member Join Date: Apr 2013 Drives: Scion FR-S 2013 Location: Houston, TX Posts: 257 Thanks: 89 Thanked 32 Times in 26 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	I'll check tomorrow. I can ship after Easter easiest, will that work for you?

04-04-2017, 06:54 PM	#7
3D1 Junior Member Join Date: Feb 2016 Drives: Scion FRS Location: Iowa Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	That works. Can you give me some more information about the engine?

04-05-2017, 08:24 AM	#8
Bullnettles Senior Member Join Date: Apr 2013 Drives: Scion FR-S 2013 Location: Houston, TX Posts: 257 Thanks: 89 Thanked 32 Times in 26 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Work got insane, sorry for the delay. I've put in a request for a freight quote with my warehouse manager. Motor has only had bolt-ons and tune, had a code for a bad coil. Took it in, on the way home I got a CEL that I can't recall, but it was blinking and the motor seemed out of sync. Reset, started it, seemed 100%. Drove it home, then the next morning I started it and it knocked for maybe a second, then evened out. Was going to drive it to the shop that did the coil, and it started knocking hard on the way in w/low oil pressure light. Killed it immediately and took it to the shop that put in the coil. They took no responsibility. Buddy from back home was off for a few days, so he came and grabbed it and took it to my shop back home and we put a junkyard motor in it. The oil filter had brass shavings in it, but we did NOT want to tear into the engine to see anything else. Seems more complicated than we were wanting to deal with.

04-05-2017, 08:42 AM	#9
Bullnettles Senior Member Join Date: Apr 2013 Drives: Scion FR-S 2013 Location: Houston, TX Posts: 257 Thanks: 89 Thanked 32 Times in 26 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	YRC FREIGHT- 4 DAYS, 264.76 R&L CARRIERS-2 DAYS, 274.82 SAIA- 2 DAYS, 286.70

04-05-2017, 06:39 PM	#10
3D1 Junior Member Join Date: Feb 2016 Drives: Scion FRS Location: Iowa Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I'm interested. Send me a PM so we can work out the details.

User Name		Remember Me?
Password