|
BRZ First-Gen (2012+) -- General Topics All discussions about the first-gen Subaru BRZ coupe |
![]() |
|
Thread Tools | Search this Thread |
![]() |
#1 |
Member
Join Date: Mar 2013
Drives: Subota BRZ
Location: NJ
Posts: 33
Thanks: 1
Thanked 44 Times in 7 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
BRZ limited has factory installed sound proofing
For All Who Are Looking To Add Sound Proofing To Your BRZ. Here Is What I Found So Far In The BRZ.
doors: From The Factory, there Are Two Pieces Of CLD On The Outer Door Skin. One By The Speaker, The Other By The Door Handle. Each piece Is About 6X6 Inches. (I Added Two 12X6 CLD Tiles Above The Crash Bar And One 6X6 Tile By The Speaker.) There Is Nothing On The Inner Door Skin. The Inner Door Skin Has A Lot Of Metal Folds In It Does not Resonate Much.(I Did Not Add Anything To It). TheTrim Panel Has Nothing On It. (i Added a Layer Of MLV, A Layer Of 3M Thinsulate Acoustic 1/4 Inch Thick. And Filled The Spaces In The Door Trim With Thinsulate.) Front Seat Foot Wells: There Is What Looks To Be Sound And Heat Insulation Here. Closed Cell Foam, 1/8 inch MLV?, styrofoam, And Jute. As We All Know, There is Room For Improvement Here. (I Added A Layer Of MLV From As High on The Heat Shield As I Could Get All The Way To The Front Mounting Point Of The Front seats. The Same Layer Went Up The Sides Of The Footwell From The Center Counsel Trim To The Door Sill.) I Put A 39 inch By 19 Inch Piece Of MLV into The Back Seat. Added A Later Of Thinsulate Here As well. Overall, Not Bad. I Got A 6 dB Reduction In Noise At Peak 75 hZ At head Level Drivers Seat.This Is Driving At 70 Mph On Asphalt . Next I Plan To Add 30% Coverage CLD to The Trunk, Followed By MLV and thinsulate To The Rear Seat Bottoms. |
![]() |
![]() |
The Following 3 Users Say Thank You to ebgs500e For This Useful Post: |
![]() |
#2 |
Member
Join Date: Apr 2013
Drives: HONDA S2000
Location: Miami
Posts: 10
Thanks: 0
Thanked 2 Times in 1 Post
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
|
|
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Aug 2011
Drives: '12 C63 P31, '17 GTI Sport, '00 MR2
Location: NC
Posts: 3,140
Thanks: 2,908
Thanked 2,034 Times in 1,155 Posts
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
|
People are trying to make their BRZ quietER?!?
![]() The car is already way too quiet for a sports car ![]()
__________________
Current: 2023 GRC Circuit Edition, 2012 C63 AMG P31
Past: (2) 2000 MR2 Spyder, 2017 GTI Sport, 2006 Porsche Cayman S, Supercharged 2013 BRZ-L, 2007 Honda S2000, 1992 Integra GS-R |
![]() |
![]() |
The Following User Says Thank You to WolfpackS2k For This Useful Post: | Ganthrithor (05-03-2013) |
![]() |
#4 |
Member
Join Date: Mar 2013
Drives: Subota BRZ
Location: NJ
Posts: 33
Thanks: 1
Thanked 44 Times in 7 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
|
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Oct 2010
Drives: TBD
Location: Toronto
Posts: 2,582
Thanks: 665
Thanked 684 Times in 386 Posts
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
|
wHAT iS wITH aLL tHE cAPS?
|
![]() |
![]() |
The Following User Says Thank You to Sport-Tech For This Useful Post: | Ingen (05-05-2013) |
![]() |
#6 |
Member
Join Date: Mar 2013
Drives: Subota BRZ
Location: NJ
Posts: 33
Thanks: 1
Thanked 44 Times in 7 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
Just Trying To Share Some Info. Your Goals May Vary From Mine. For Me, This Is A Daily Driver. I Have A 100 Miles Per Day Of Commuting To Do And Lot Of That Time, I Am On The Phone With Clients.
|
![]() |
![]() |
![]() |
#7 |
Member
Join Date: Mar 2013
Drives: Subota BRZ
Location: NJ
Posts: 33
Thanks: 1
Thanked 44 Times in 7 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
|
![]() |
![]() |
![]() |
#8 |
White Guy
Join Date: Jan 2013
Drives: 2005 Subaru WRX STI
Location: Flagstaff, AZ
Posts: 90
Thanks: 3
Thanked 20 Times in 12 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Theres two panels of that black tar crap in the footwells. One just in front of the seat and one just behind it. There's one on each side of the trans tunnel and on top of it. There's some half inch thick rubber backed foam that covers the whole trans tunnel. Theres a half inch thick firewall blanket too. Couple pounds of seam sealer under all that.
Last edited by antlers; 05-03-2013 at 04:53 PM. |
![]() |
![]() |
![]() |
#9 |
Member
Join Date: Feb 2012
Drives: an awesome one
Location: CA
Posts: 89
Thanks: 67
Thanked 19 Times in 9 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
|
![]() |
![]() |
![]() |
#10 | |
Member
Join Date: Mar 2013
Drives: Subota BRZ
Location: NJ
Posts: 33
Thanks: 1
Thanked 44 Times in 7 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
Quote:
|
|
![]() |
![]() |
![]() |
#11 |
Senior Member
Join Date: Feb 2012
Drives: WRB LMTD '13
Location: Phillips Ranch
Posts: 1,246
Thanks: 184
Thanked 242 Times in 158 Posts
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
|
then you should be driving a mercedes or lexus instead. Sorry you bought the wrong car.
|
![]() |
![]() |
![]() |
#12 |
I Love custom Turbo kits
Join Date: Mar 2012
Drives: Limited BRZ
Location: Miami
Posts: 10,770
Thanks: 20,004
Thanked 8,342 Times in 4,361 Posts
Mentioned: 441 Post(s)
Tagged: 12 Thread(s)
|
I don't get this type of comment. Anyone can buy any car to do whatever pleases them with it. It's their money. He didn't buy the wrong car. He bought the car he wanted and is doing with it whatever it is he likes. No need for belittling comments.
__________________
|
![]() |
![]() |
The Following 16 Users Say Thank You to Sportsguy83 For This Useful Post: | aceangel (05-07-2013), autobrz (05-28-2013), DAEMANO (08-19-2013), DaJo (05-03-2013), Eurasianman (05-07-2013), exmayol (05-08-2013), husker741 (05-07-2013), Ingen (05-05-2013), JonnyRocket (05-04-2013), mike18 (05-06-2013), Re_Invention (05-26-2013), shirker (05-05-2013), sprintertrueno86 (05-07-2013), Turbowned (05-27-2013), WillBRZ (05-07-2013), zoomzoomers (05-03-2013) |
![]() |
#13 | |
FT86Club Vancouver
Join Date: Jun 2012
Drives: BRZ Sport-Tech; Drove: MR-S, AE86
Location: Vancouver, BC
Posts: 2,532
Thanks: 391
Thanked 1,178 Times in 633 Posts
Mentioned: 16 Post(s)
Tagged: 2 Thread(s)
|
Quote:
OP is not complaining about the noise in the car; he's just sharing some useful information which may or may not benefit you and the community.
__________________
1984 AE86 BT 20V 5MT 2007-2012
2000 MR-S 5MT 2010-2012 2013 BRZ Sport-Tech 6AT Since '12 (OEM+ STI tS Build) 2015 Lexus IS250 AWD F-Sport 2 2015-2018 2018 Lexus NX300 F-Sport 3 Since '18 |
|
![]() |
![]() |
The Following 5 Users Say Thank You to DaJo For This Useful Post: | autobrz (05-28-2013), clzzical (05-04-2013), DAEMANO (08-19-2013), Sportsguy83 (05-03-2013), WillBRZ (05-07-2013) |
![]() |
#14 |
White Guy
Join Date: Jan 2013
Drives: 2005 Subaru WRX STI
Location: Flagstaff, AZ
Posts: 90
Thanks: 3
Thanked 20 Times in 12 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
|
![]() |
![]() |
|
|
![]() |
Tags |
cld, mlv, sound deadening, thinsulate |
Thread Tools | Search this Thread |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Has anyone actually installed BRZ limited seats in their FRS? | Chaetagnath | Scion FR-S / Toyota 86 GT86 General Forum | 27 | 10-12-2016 03:02 PM |
Mustang GT Sound Tube installed | sw20kosh | Engine, Exhaust, Transmission | 12 | 04-13-2013 12:10 AM |
Limited WRB BRZ factory spoiler. | chadstyle | Exterior Parts (Aero, Lighting, Etc.) | 8 | 01-27-2013 02:53 PM |
Zeta Intake Piping (w/o Sound Generator Outlet) Installed | zkubidu | Engine, Exhaust, Transmission | 3 | 11-16-2012 10:26 PM |
Installed new in-dash, lost sound from door speakers | Nitro | Electronics | Audio | NAV | Infotainment | 2 | 06-04-2012 09:53 PM |