3D Printing - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Westen86 · 03-24-2020, 09:59 AM

Can anybody 3D print the JUN front air intake piece? Or make something very similar?

NoHaveMSG · 03-24-2020, 11:25 AM

It would have to be in multiple pieces. That is pretty large. I don't know many people that have print beds larger then 300mm X 300mm.

Dadhawk · 03-24-2020, 11:34 AM

Here's something interesting and useful to 3D print, a mask useful in fighting COVID-19.

[ame]https://www.youtube.com/watch?v=I7imofVk-pk[/ame]

Details and files are here.

NoHaveMSG · 03-24-2020, 11:42 AM

Quote:

Originally Posted by Dadhawk

Here's something interesting and useful to 3D print, a mask useful in fighting COVID-19.

Details and files are here.

I have a few friends that have been printing these. I haven't tried to do one yet, I only have a little bit of PLA at the moment.

Dadhawk · 03-24-2020, 12:00 PM

Quote:

Originally Posted by NoHaveMSG

I have a few friends that have been printing these. I haven't tried to do one yet, I only have a little bit of PLA at the moment.

Any feedback on their experiences?

NoHaveMSG · 03-24-2020, 12:06 PM

Quote:

Originally Posted by Dadhawk

Any feedback on their experiences?

It says it can be printed without supports, everyone I know that has printed it has had to add supports. Looking at it in Cura I agree do to the tabs for the elastic straps and because of the open end is not an even surface. On my machine this makes it a 7+ hour print.

It comes out okay but the edges need cleaned up quite a bit to make it comfortable. It is nice as it is easy to re-scale the mask to fit smaller or larger people and it can be shaped with a file to fit odd faces.

Dadhawk · 03-24-2020, 12:47 PM

Quote:

Originally Posted by NoHaveMSG

It says it can be printed without supports, everyone I know that has printed it has had to add supports. Looking at it in Cura I agree do to the tabs for the elastic straps and because of the open end is not an even surface. On my machine this makes it a 7+ hour print.

It comes out okay but the edges need cleaned up quite a bit to make it comfortable. It is nice as it is easy to re-scale the mask to fit smaller or larger people and it can be shaped with a file to fit odd faces.

Thanks. I appreciate that.

NoHaveMSG · 03-24-2020, 12:56 PM

Quote:

Originally Posted by Dadhawk

Thanks. I appreciate that.

No problem. You could probably get away with no supports if you weren’t too concerned with a perfectly clean print. You will just get some stringing like this.

Westen86 · 03-24-2020, 01:38 PM

Hi-jacked by COVID.

Dadhawk · 03-24-2020, 02:34 PM

Quote:

Originally Posted by NoHaveMSG

No problem. You could probably get away with no supports if you weren’t too concerned with a perfectly clean print. You will just get some stringing like this.

There's another one at this location that supposedly prints better, but I don't know enough to know.

https://www.prusaprinters.org/prints...ask-substitute

Dadhawk · 03-24-2020, 02:35 PM

Quote:

Originally Posted by Westen86

Hi-jacked by COVID.

More like infected...

Westen86 · 03-24-2020, 03:25 PM

Im bored at work because my job is deemed essential. Parts dept at Kia.

Westen86 · 05-01-2020, 09:40 AM

Quote:

Originally Posted by Westen86

Can anybody 3D print the JUN front air intake piece? Or make something very similar?

BUMP

jonathan9573 · 05-04-2020, 10:53 PM

I can give it a shot. Do you have dimension or and specs on the size? Any reference other the. The pic?

03-24-2020, 11:34 AM	#3
Dadhawk 1st86 Driver! Join Date: Feb 2012 Drives: '13 FR-S (#3 of 1st 86) Location: Powder Springs, GA Posts: 19,814 Thanks: 38,822 Thanked 24,939 Times in 11,376 Posts Mentioned: 182 Post(s) Tagged: 4 Thread(s)	Here's something interesting and useful to 3D print, a mask useful in fighting COVID-19. [ame]https://www.youtube.com/watch?v=I7imofVk-pk[/ame] Details and files are here. __________________ Visit my Owner's Journal where I wax philosophic on all things FR-S Post your 86 or see others in front of a(n) (in)famous landmark. What fits in your 86? Show us the "Junk In Your Trunk".

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
custom vinyl graphic printing	DarkestBuddha	Cosmetic Modification (Interior/Exterior/Lighting)	0	02-06-2016 01:26 AM
3D Printing Ideas?	YamahaR86	Cosmetic Modification (Interior/Exterior/Lighting)	11	01-19-2016 07:22 PM
3D printing and beyond	Books	Member's Car Journals	32	07-01-2015 01:54 AM
Water Transfer Printing	mikepaul21	Cosmetic Modification (Interior/Exterior/Lighting)	9	07-17-2014 01:31 AM
3D printing parts	ortizwyld	Scion FR-S / Toyota 86 GT86 General Forum	12	07-18-2013 08:44 PM

User Name		Remember Me?
Password