SUBARU 4Pot Calipers "Bremboed" Direct Bolt On- SD, CA CHEAP!

[virjose]

PER MY WIFE'S COMMENT (OR COMMAND) I NEED THESE OUT OF MY GARAGE ASAP, SO I CAN DO $350 SHIPPED THIS WEEKEND AS A FOURTH OF JULY SPECIAL

Hey everyone,
I recently picked up a couple of sets of front Subaru 4Pot calipers for my upcoming BRZ (a black and red set, I will keep the red ones). This one used to be red but was repainted by the previous owner with high-temp black paint and applied Brembo decals; they seem to be in great condition. This will work nicely with a FR-S or a BRZ, or you can repaint them to say whatever you want (since it is not the calipers with the raised "SUBARU" letters). These are a direct bolt-on to any FR-S or BRZ as it uses the stock rotors and caliper mounting points, just install and bleed and you are all set! Comes with all pins and clips as well as a pretty much new set of Bosch brake pads!!! These originally came of a 2007 WRX.

These are in San Diego. I can do $400 picked up or $425 shipped. First come first served

[taimysho0]

is this for fronts or rears or both?

[virjose]

This is just for the fronts. OBO so let me know

[virjose]

These retail for $340 a piece. Lots of pms but the first to paypal gets them

[Sportsguy83]

Originally Posted by virjose

These retail for $340 a piece. Lots of pms but the first to paypal gets them

This is a regular WRX caliper with a Brembo sticker in it? Is there any advantage over the BRZ brakes? Aren't the BRZ calipers 4 pot too? (Honest questions, just want to see what type of upgrade this is).

[virjose]

As mentioned, these are manufactured by subaru (came stock as an upgrade on 06-07 WRXs) and the previous owner painted them black and applied brembo decals over the subaru part, which is why I thought it would be a good item for the FRS crowd since it doesn't say subaru anymore. You can repaint them and put whatever you want on them

And no, the stock calipers are only 2pots as only one side has pistons and the other just gets the pressure. These have 2 pistons on each side

While he stock frs/brz calipers are good, these are an upgrade both functionally as well as visually.

Lmk!

Originally Posted by Sportsguy83

This is a regular WRX caliper with a Brembo sticker in it? Is there any advantage over the BRZ brakes? Aren't the BRZ calipers 4 pot too? (Honest questions, just want to see what type of upgrade this is).

[daywheniwaschillin]

Any pics of these installed? Any interference with oem wheels?

Sent from my SCH-I545 using Tapatalk 2

[virjose]

Here is a thread that details the bolt on process as well as pictures of a BRZ with them on.

http://www.ft86club.com/forums/showthread.php?p=749255

THe stock wheels should be large enough to allow for these to fit (I havent done it myself yet), but worst comes to worst a small 3mm spacer (if at all) is all you would need on stock wheels. (these originally came installed on the 06-07 WRXs which also had 17x7 wheels).

Here are some pics:

Originally Posted by daywheniwaschillin

Any pics of these installed? Any interference with oem wheels?

Sent from my SCH-I545 using Tapatalk 2

[1slwfrs]

Pm'd

[virjose]

bump for purrrddddy brakes

[d1ck]

Are these Aluminium?

[Wonderbar]

Originally Posted by d1ck

Are these Aluminium?

They are! I'm actually picking up a set this weekend. Sti red with ebc rotors as pads. This is a good deal, I'd jump on it.

Sweet set of brakes if you want to keep 17's and not spend AP racing money.

[virjose]

Thanks! for the bump

I can ship these out in a USPS flat rate box which should get to you within 2-3 days, as a result I can do $415 shipped since shipping will be cheaper than I thought! LMK

[virjose]

All packed and ready to go! $400 shipped lets get these sold!