Edelbrock Supercharger - Built Engine - 420 WHP on Flex Fuel - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

CSG Mike · 11-16-2016, 05:20 PM

Quote:

Originally Posted by ATL BRZ

Still doesn't explain why his car was relatively down on power for that compression ratio and boost pressure. I'm guessing either the belt or the clutch or both were slipping on the dyno.

Quote:

Originally Posted by DeliciousTuning

According to the compressor map on these superchargers the efficiency area of these superchargers is up to about 15 psi. The intercoolers are still working really well and the supercharger is not generating too much heat. With that in mind you get a cooler denser charge (more air) which allows the tuner to increase timing, lean it out, play with the cams and make power.

When you start pushing above 15 psi the heat starts to increase dramatically and at 20 psi the supercharger is generating enough heat that the intercoolers cannot quite cut it and so you need to dial the tune back a bit on the top end.

Diminishing returns.

Stimmed · 11-16-2016, 05:28 PM

Hmmm just wondering why the AFR's seem to be all over the place? And its quite lean?. Would be a blast to drive at that power!

DeliciousTuning · 11-16-2016, 07:06 PM

Quote:

Originally Posted by Stimmed

Hmmm just wondering why the AFR's seem to be all over the place? And its quite lean?. Would be a blast to drive at that power!

The location of the wideband was not in the most ideal location for his vehicle; at the tailpipe on one side and we were using it more as a reference during pulls.

We actually use the OEM sensor (which we have rescaled) for more accurate measurements and continuous closed loop fueling.

Cheers,
William Knose
Delicious Tuning

Irace86 · 11-17-2016, 12:09 AM

Quote:

Originally Posted by VIP BRZ

didn't he juts buy a GTR? Blowing an engine on a car he doesn't even drive would only boost his channel views..

I think that was just click bait. He has a fair share of it.

FRS Justin · 11-17-2016, 01:19 AM

Bill you been busted riding in a customers car, now you have to ride in the ft86project9s car no excuses and yes you will be holding a camera. And a go pro facing you.

CSG Mike · 11-17-2016, 01:08 PM

Quote:

Originally Posted by FRS Justin

Bill you been busted riding in a customers car, now you have to ride in the ft86project9s car no excuses and yes you will be holding a camera. And a go pro facing you.

Does that mean he has to also go on track with me now??!?

FRS Justin · 11-17-2016, 02:50 PM

Quote:

Originally Posted by CSG Mike

Does that mean he has to also go on track with me now??!?

Yes sir, I really can't see a way out of it lol

sdot · 11-18-2016, 02:14 PM

Is this set up CARB legal?

chaoscentral · 11-18-2016, 02:35 PM

Quote:

Originally Posted by sdot

Is this set up CARB legal?

Once you remove the CARB tune it is technically not CARB legal. Especially once you go adding E85 into the mix

Irace86 · 11-19-2016, 01:03 AM

Quote:

Originally Posted by Irace86

I think that was just click bait. He has a fair share of it.

Nevermind, he bought a GTR.

DeliciousTuning · 01-04-2017, 02:39 PM

Quote:

Originally Posted by Irace86

Nevermind, he bought a GTR.

Yes he bought one and going to working on a Flex Fuel Kit and tune for his GTR next. Stay tuned...

Cheers,
William Knose
Delicious Tuning

casing · 03-28-2019, 08:04 PM

so what kind of numbers can you expect with the stock pulley, UEL and 91 octane?

GPhilly · 04-12-2022, 02:25 PM

is the dyno graph still available? It looks to be removed from the post.

11-16-2016, 05:28 PM	#16
Stimmed Member Join Date: Sep 2014 Drives: Toyota 86 Location: Australia Posts: 73 Thanks: 10 Thanked 29 Times in 24 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Hmmm just wondering why the AFR's seem to be all over the place? And its quite lean?. Would be a blast to drive at that power! __________________ 2013 Toyota 86 (IQOf86) - Coyoda Turbo Kit, Perrin 3" Exhaust, 18" CE28SL's, Custom Oil Cooler/Transmission Cooler, Tuned by Coyote Tuning, Built FA20, E85 Fuel, Turbo Kit and Oil Coolers installed by Turbo Yoda

11-17-2016, 01:19 AM	#19
FRS Justin Senior Member Join Date: May 2014 Drives: 2013 Asphalt FRS Location: San Antonio Posts: 994 Thanks: 693 Thanked 695 Times in 417 Posts Mentioned: 22 Post(s) Tagged: 1 Thread(s)	Bill you been busted riding in a customers car, now you have to ride in the ft86project9s car no excuses and yes you will be holding a camera. And a go pro facing you. __________________ Instagram FT86PROJECT9S Facebook FT86PROJECT9S 710whp

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ernest's Flex-Fuel, FBM Stage 2 Turbo, Built FA20-V161 Driven BRZ - PHOTON	Enalband24	Member's Car Journals	78	02-04-2020 01:55 PM
Delicious Tuning: Edelbrock E-Force Supercharger with Flex Fuel – Official Dyno Data	DeliciousTuning	Software Tuning	53	10-19-2018 11:55 AM
Zeitronix Ethanol Content Analyzer and Display Kit Red + Flex Fuel Sensor with Fuel L	BRZ_HaVoKx	Engine, Exhaust, Bolt-Ons	9	01-15-2017 09:40 PM
Moto-East Edelbrock/Flex fuel Combo	-Phil	Forced Induction	1	10-21-2016 05:28 PM
ECUtek Flex Fuel REVOLUTION: World's First Flex Fuel Factory ECU GTR - BRZ soon!	Visconti	Engine, Exhaust, Transmission	356	05-20-2013 09:36 AM

11-18-2016, 02:14 PM	#22
sdot Member Join Date: Apr 2015 Drives: 2015 WRB BRZ Location: bay area Posts: 14 Thanks: 1 Thanked 2 Times in 2 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Is this set up CARB legal?

03-28-2019, 08:04 PM	#26
casing Member Join Date: Mar 2017 Drives: stock Location: Canada Posts: 45 Thanks: 1 Thanked 7 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	so what kind of numbers can you expect with the stock pulley, UEL and 91 octane?

04-12-2022, 02:25 PM	#27
GPhilly Member Join Date: Oct 2021 Drives: 2020 Subaru BRZ (Edelbrock SC) Location: Colorado Posts: 67 Thanks: 90 Thanked 25 Times in 13 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	is the dyno graph still available? It looks to be removed from the post.

User Name		Remember Me?
Password