Subaru BRZ high pitched squeal/whine/buzz - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Abaier · 07-21-2022, 12:05 PM

Hello all,

I’m having an issue with my 2015 Subaru BRZ 79k miles and was wondering if anyone had a similar problem they resolved or could shed any light on what I should try next.

About 3 months ago I washed the car and when I started it I heard a very slight whine coming from the engine. It became louder with increased rpm. In the following three weeks it increased in intensity to what it is now. I looked everywhere and thought the sound was similar to an alternator bearing going bad. I replaced the alternator but the whine was exactly the same. I then thought it could be the accessory belt, but after replacing the sound was exactly the same. Does anyone have any ideas of what I should try next to diagnose and resolve the issue? Thank you!

Heres a link to a video I took this morning demonstrating the issue:
https://youtube.com/shorts/m1WtIs_RSPs?feature=share

NoHaveMSG · 07-21-2022, 12:24 PM

The inner part of the AC compressor pulley is not spinning. These are clutched somehow. Wonder if it is smoked.

Ultramaroon · 07-21-2022, 01:44 PM

Remove the belt and spin stuff by hand. If any of the parts make the slightest noise, replace.

Also, try running it with the input connector of the alternator disconnected. ...the little one.

aKaGorganZola · 07-21-2022, 08:09 PM

Take a long screwdriver and put it on the center bolt of every pulley. Listen for the one that sounds rough. I just upgraded to a set of raceseng pulleys because when i washed my engine bay I'm assuming the cleaner got into the bearing of my idler pulley and within a day or two the bearing started making noise.

NoHaveMSG · 07-21-2022, 09:17 PM

Quote:

Originally Posted by aKaGorganZola

Take a long screwdriver and put it on the center bolt of every pulley. Listen for the one that sounds rough. I just upgraded to a set of raceseng pulleys because when i washed my engine bay I'm assuming the cleaner got into the bearing of my idler pulley and within a day or two the bearing started making noise.

Yup, ghetto stethoscope, I do it all the time. Just don't forget which side is pointy

Ultramaroon · 07-21-2022, 09:52 PM

...or touch the moving parts

NoHaveMSG · 07-21-2022, 09:59 PM

Quote:

Originally Posted by Ultramaroon

...or touch the moving parts

One of my buddies keeps sending me lathe video's like that and now I am tempted to get naked everytime I run the thing.

soundman98 · 07-21-2022, 10:50 PM

Quote:

Originally Posted by NoHaveMSG

The inner part of the AC compressor pulley is not spinning. These are clutched somehow. Wonder if it is smoked.

it doesn't normally spin unless the a/c is enabled, or hvac is set to 'auto', or 'defrost'.

still a potential spot though.

it almost sounds more like a rubbing noise. i know i've heard dozens of 90's GM's that sound exactly like that in the rougher neighborhoods, but never really learned what caused it!

Ultramaroon · 07-21-2022, 11:15 PM

Quote:

Originally Posted by soundman98

i know i've heard dozens of 90's GM's that sound exactly like that in the rougher neighborhoods, but never really learned what caused it!

It sounds like a power steering pump when the fluid is low.

soundman98 · 07-21-2022, 11:46 PM

modded '15 with a hydraulic steering assist? lol

Abaier · 07-22-2022, 11:46 AM

Thanks for all the suggestions everyone! Going ti be working on the car tomorrow so will update then

Abaier · 07-22-2022, 10:04 PM

Quote:

Originally Posted by Ultramaroon

It sounds like a power steering pump when the fluid is low.

Checked and the fluid is just below the max line

Abaier · 07-22-2022, 10:06 PM

Quote:

Originally Posted by aKaGorganZola

Take a long screwdriver and put it on the center bolt of every pulley. Listen for the one that sounds rough. I just upgraded to a set of raceseng pulleys because when i washed my engine bay I'm assuming the cleaner got into the bearing of my idler pulley and within a day or two the bearing started making noise.

Funny enough this all started right after washing my car, I didn’t clean the engine bay though. I went ahead and did this after work today and all of the pulleys with center bolts that don't move didn’t sound/feel rough at all except for the tensioner pulley. Is this expected? Heres a closer video of it:
https://youtube.com/shorts/bGSG7JSbUJY?feature=share

Ultramaroon · 07-23-2022, 12:13 AM

Quote:

Originally Posted by Abaier

Checked and the fluid is just below the max line

Haha

That tensioner swing is perfectly normal. Healthy.

07-21-2022, 12:05 PM	#1
Abaier Member Join Date: Aug 2018 Drives: 2015 Subaru BRZ Limited Location: California Posts: 16 Thanks: 0 Thanked 8 Times in 6 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Subaru BRZ high pitched squeal/whine/buzz Hello all, I’m having an issue with my 2015 Subaru BRZ 79k miles and was wondering if anyone had a similar problem they resolved or could shed any light on what I should try next. About 3 months ago I washed the car and when I started it I heard a very slight whine coming from the engine. It became louder with increased rpm. In the following three weeks it increased in intensity to what it is now. I looked everywhere and thought the sound was similar to an alternator bearing going bad. I replaced the alternator but the whine was exactly the same. I then thought it could be the accessory belt, but after replacing the sound was exactly the same. Does anyone have any ideas of what I should try next to diagnose and resolve the issue? Thank you! Heres a link to a video I took this morning demonstrating the issue: https://youtube.com/shorts/m1WtIs_RSPs?feature=share

07-21-2022, 01:44 PM	#3
Ultramaroon 義理チョコ Join Date: Sep 2014 Drives: a 13 e8h frs Location: vantucky, wa Posts: 31,870 Thanks: 52,132 Thanked 36,520 Times in 18,921 Posts Mentioned: 1107 Post(s) Tagged: 9 Thread(s)	Remove the belt and spin stuff by hand. If any of the parts make the slightest noise, replace. Also, try running it with the input connector of the alternator disconnected. ...the little one. __________________ service manuals

07-21-2022, 09:52 PM	#6
Ultramaroon 義理チョコ Join Date: Sep 2014 Drives: a 13 e8h frs Location: vantucky, wa Posts: 31,870 Thanks: 52,132 Thanked 36,520 Times in 18,921 Posts Mentioned: 1107 Post(s) Tagged: 9 Thread(s)	...or touch the moving parts __________________ service manuals

07-21-2022, 11:46 PM	#10
soundman98 ProCrastinationConsultant Join Date: Sep 2013 Drives: '14 Ranger, '18 Tacoma 4Dr LB Location: chicago-ish Posts: 11,330 Thanks: 35,240 Thanked 13,673 Times in 6,781 Posts Mentioned: 98 Post(s) Tagged: 0 Thread(s)	modded '15 with a hydraulic steering assist? lol __________________ "The time you enjoy wasting is not wasted time"

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
High pitched whine/squeal.	JavieBruh	Engine, Exhaust, Transmission	16	01-12-2022 10:08 AM
High pitched turbo like whine following rpms	Nfsundrgrnd	Issues \| Warranty \| Recalls / TSB	8	02-15-2021 11:02 PM
High pitched squeal only when braking only with a winter wheel	PatMegron	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	4	12-16-2020 03:57 PM
Squeal/whine when steering wheel is turning	motomike	Issues \| Warranty \| Recalls / TSB	4	10-08-2019 06:31 AM
High pitched whine from sound tube and idle jumping	Nourdmrolnmt1	Issues \| Warranty \| Recalls / TSB	0	04-17-2013 11:00 PM

07-22-2022, 11:46 AM	#11
Abaier Member Join Date: Aug 2018 Drives: 2015 Subaru BRZ Limited Location: California Posts: 16 Thanks: 0 Thanked 8 Times in 6 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Thanks for all the suggestions everyone! Going ti be working on the car tomorrow so will update then

User Name		Remember Me?
Password