Clicking noise while Driving stops when Clutch is pressed - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Inteze · 10-01-2019, 05:40 PM

Hello,

I have searched the forum but didn’t seem to find a solution.

I have noticed that, while I am driving, I get this moderate loud “Clicking” Noise coming from the front left wheel, watch the video, i’ve put the link down there. It happens often while applying load to that side (while turning right, downshifting) and it “stops” as soon as I press the Clutch Pedal. It doesn’t happen all the time but very often.

Also while breaking nothing happens, it only goes away once I pressed the Clutch pedal down. Once I release it, it comes back.

VIDEO :

Can please somebody help me?
Thank you very much

humfrz · 10-01-2019, 11:17 PM

Quote:

Originally Posted by Inteze

Hello,

I have searched the forum but didn’t seem to find a solution.

I have noticed that, while I am driving, I get this moderate loud “Clicking” Noise coming from the front left wheel, watch the video, i’ve put the link down there. It happens often while applying load to that side (while turning right, downshifting) and it “stops” as soon as I press the Clutch Pedal. It doesn’t happen all the time but very often.

Also while breaking nothing happens, it only goes away once I pressed the Clutch pedal down. Once I release it, it comes back.

VIDEO :

Can please somebody help me?
Thank you very much

Hello Inteze and welcome to the forum -

Your video doesn't help me.

What year is your car? How many miles on your car?

You may have two things working there.

The sound from the front end sounds like a wheel bearing may be going bad.

The other sound you hear when activating the clutch sounds like it may be a TOB going bad.

humfrz

Lantanafrs2 · 10-01-2019, 11:31 PM

Once again the radio is your best friend. This car has noises that come and go. No rhyme or reason. Just moving parts and a cost effective interior

Inteze · 10-02-2019, 07:53 AM

Hello,

Year : 2013
KM : 52.000

The wheel bearing has been changed like 2000km ago, so don’t know what it could be

Inteze · 10-02-2019, 07:54 AM

It comes while I turn slightly to the right, and stops as soon as I press the Clutch pedal. Restarts once I release it

humfrz · 10-02-2019, 11:20 AM

Quote:

Originally Posted by Inteze

It comes while I turn slightly to the right, and stops as soon as I press the Clutch pedal. Restarts once I release it

Was your car under the valve spring recall? If so, have you had that work done?

As far as the noise in the front, I would suggest that you take off the front wheel and inspect the wheel bearings and brake parts.

The clutch noise could very well be a bad TOB (Throw Out Bearing).

Has the TOB ever been replaced?

humfrz

Inteze · 10-03-2019, 07:23 PM

I think the TOB not.
Yes I have to go to the Toyota dealer to do the Valvespring fix.

And the wheel bearing has been changed

Thank you though

Inteze · 11-18-2019, 06:03 AM

Other suggestions?
It’s so annoying ... and happens only while i turn slightly to the right.

Once i release the clutch it ticks quickly 3 times and stops

alan.chalkley · 11-19-2019, 02:12 AM

Loose mounting bolts clutch to flywheel or loose flywheel mounting bolts?

MJones_RB · 11-22-2019, 05:01 PM

If it goes away when the clutch is pressed then it could be where the slave cylinder connects to the clutch fork. Checked to see if it's properly lubricated. If it looks dusty or dry, squeeze a whole bunch of waterproof grease (or Honda lube) at the point they connect and press your clutch in and out several times. See if that helps.

Inteze · 11-25-2019, 06:02 PM

Quote:

Originally Posted by MJones_RB

If it goes away when the clutch is pressed then it could be where the slave cylinder connects to the clutch fork. Checked to see if it's properly lubricated. If it looks dusty or dry, squeeze a whole bunch of waterproof grease (or Honda lube) at the point they connect and press your clutch in and out several times. See if that helps.

Alright ill check thanks

Inteze · 11-25-2019, 06:05 PM

Also it is 100% audible from the outside (noise coming from outside of the cabine) and it is on the driver side near the front wheel

Inteze · 04-09-2020, 01:07 PM

Broken CV Joint, axle had to be replaced

10-01-2019, 05:40 PM	#1
Inteze Member Join Date: Sep 2019 Drives: Toyota GT86 Location: Luxembourg Posts: 26 Thanks: 1 Thanked 2 Times in 2 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Clicking noise while Driving stops when Clutch is pressed Hello, I have searched the forum but didn’t seem to find a solution. I have noticed that, while I am driving, I get this moderate loud “Clicking” Noise coming from the front left wheel, watch the video, i’ve put the link down there. It happens often while applying load to that side (while turning right, downshifting) and it “stops” as soon as I press the Clutch Pedal. It doesn’t happen all the time but very often. Also while breaking nothing happens, it only goes away once I pressed the Clutch pedal down. Once I release it, it comes back. VIDEO : Can please somebody help me? Thank you very much

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Clicking noise from clutch when depressed/released?	BaeK	Issues \| Warranty \| Recalls / TSB	29	02-10-2020 01:48 PM
Clutch Pedal "Clicking" Noise on new BRZ	Shizuka	Engine, Exhaust, Transmission	6	05-31-2019 01:57 PM
What is this OTHER clicking noise?	radroach	Issues \| Warranty \| Recalls / TSB	0	02-16-2019 01:10 PM
Wilwood BBK Clicking Noise	AlexK	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	0	03-24-2016 07:38 PM
Clicking / tapping sound + fuel pump noise + clutch grinding	Mikeez	Issues \| Warranty \| Recalls / TSB	11	04-26-2015 11:19 PM

10-01-2019, 11:31 PM	#3
Lantanafrs2 Senior Member Join Date: Jan 2018 Drives: 2013 frs red Location: South Florida Posts: 3,517 Thanks: 2,520 Thanked 3,088 Times in 1,654 Posts Mentioned: 6 Post(s) Tagged: 1 Thread(s)	Once again the radio is your best friend. This car has noises that come and go. No rhyme or reason. Just moving parts and a cost effective interior

10-02-2019, 07:53 AM	#4
Inteze Member Join Date: Sep 2019 Drives: Toyota GT86 Location: Luxembourg Posts: 26 Thanks: 1 Thanked 2 Times in 2 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Hello, Year : 2013 KM : 52.000 The wheel bearing has been changed like 2000km ago, so don’t know what it could be

10-02-2019, 07:54 AM	#5
Inteze Member Join Date: Sep 2019 Drives: Toyota GT86 Location: Luxembourg Posts: 26 Thanks: 1 Thanked 2 Times in 2 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	It comes while I turn slightly to the right, and stops as soon as I press the Clutch pedal. Restarts once I release it

10-03-2019, 07:23 PM	#7
Inteze Member Join Date: Sep 2019 Drives: Toyota GT86 Location: Luxembourg Posts: 26 Thanks: 1 Thanked 2 Times in 2 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I think the TOB not. Yes I have to go to the Toyota dealer to do the Valvespring fix. And the wheel bearing has been changed Thank you though

11-18-2019, 06:03 AM	#8
Inteze Member Join Date: Sep 2019 Drives: Toyota GT86 Location: Luxembourg Posts: 26 Thanks: 1 Thanked 2 Times in 2 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Other suggestions? It’s so annoying ... and happens only while i turn slightly to the right. Once i release the clutch it ticks quickly 3 times and stops

11-19-2019, 02:12 AM	#9
alan.chalkley Senior Member Join Date: Feb 2012 Drives: 4wd zooks Location: Sydney / Australia Posts: 495 Thanks: 135 Thanked 167 Times in 108 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Loose mounting bolts clutch to flywheel or loose flywheel mounting bolts?

11-25-2019, 06:05 PM	#12
Inteze Member Join Date: Sep 2019 Drives: Toyota GT86 Location: Luxembourg Posts: 26 Thanks: 1 Thanked 2 Times in 2 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Also it is 100% audible from the outside (noise coming from outside of the cabine) and it is on the driver side near the front wheel

04-09-2020, 01:07 PM	#13
Inteze Member Join Date: Sep 2019 Drives: Toyota GT86 Location: Luxembourg Posts: 26 Thanks: 1 Thanked 2 Times in 2 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Broken CV Joint, axle had to be replaced

User Name		Remember Me?
Password