|
Engine, Exhaust, Transmission Discuss the FR-S | 86 | BRZ engine, exhaust and drivetrain. |
|
Thread Tools | Search this Thread |
02-19-2020, 01:10 PM | #43 |
Senior Member
Join Date: May 2019
Drives: AP2 S2000, 91 Miata 1.8L Rotrex 5MT
Location: Detroit, MI
Posts: 465
Thanks: 275
Thanked 299 Times in 187 Posts
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
|
The ITB hype definitely showed how much interest there is in another NA option past the level of "simple" bolt-ons, but I think the result really fell short since it didn't address any of the big issues facing this platform.
Said issues (IMHO): 1. Lack of oil lubrication at high sustained G loads and/or also at high engine speeds 2. The huge drop-off of power at high engine speeds 3. The relatively low rev-limiter for a motorsports oriented application 4. The LOL torque dip (this one's pretty obvious) Picture:
__________________
2022 Hyundai Elantra N 6MT SCCA TT S3//Will be back in an 86 eventually
|
The Following User Says Thank You to Goingnowherefast For This Useful Post: | bhmax (02-20-2020) |
02-19-2020, 01:24 PM | #44 | |
Senior Member
Join Date: Mar 2017
Drives: JRSC BRZ SOLD
Location: Ohio
Posts: 934
Thanks: 676
Thanked 739 Times in 396 Posts
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
|
Quote:
ITBs were supposed to address oiling and rev limit? Is this trolling, this feels like trolling.They didn't address the issue of lacking turbo either. |
|
02-19-2020, 01:56 PM | #45 |
Senior Member
Join Date: May 2019
Drives: AP2 S2000, 91 Miata 1.8L Rotrex 5MT
Location: Detroit, MI
Posts: 465
Thanks: 275
Thanked 299 Times in 187 Posts
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
|
That one more falls into the category of "general issues facing NA development of the FA20", while the rest are in directed towards the ITB shortcomings.
__________________
2022 Hyundai Elantra N 6MT SCCA TT S3//Will be back in an 86 eventually
Last edited by Goingnowherefast; 02-19-2020 at 02:07 PM. |
02-19-2020, 07:56 PM | #46 | |
ProCrastinationConsultant
Join Date: Sep 2013
Drives: '14 Ranger, '18 Tacoma 4Dr LB
Location: chicago-ish
Posts: 11,330
Thanks: 35,240
Thanked 13,673 Times in 6,781 Posts
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
|
Quote:
seems to me you just want to complain about other random personal issues with the motor.
__________________
"The time you enjoy wasting is not wasted time"
|
|
02-20-2020, 11:43 AM | #47 |
Senior Member
Join Date: May 2019
Drives: AP2 S2000, 91 Miata 1.8L Rotrex 5MT
Location: Detroit, MI
Posts: 465
Thanks: 275
Thanked 299 Times in 187 Posts
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
|
This is a thread about NA development, hence why we're talking about NA development. I know people might be shocked to learn the FA20 isn't the 2nd coming of Christ, but it's still a decent engine with a lot of things to improve.
__________________
2022 Hyundai Elantra N 6MT SCCA TT S3//Will be back in an 86 eventually
|
03-16-2020, 07:41 PM | #48 |
Troll Level: Expert
Join Date: Aug 2012
Drives: '13 BRZ, '18 F150 3.5EB, '07 Cayman
Location: North Carolina
Posts: 231
Thanks: 206
Thanked 103 Times in 59 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
I'm racing in NASA ST5 (14:1) and really need more midrange without the expense of top end. The BMWs I race against have a powerband I cannot compete with. I have nothing for them in the straights, yet I run lower lap times. The latter does not mattter in a race, so I'm all in on extracting more from the NA motor.
__________________
Nick K.
NASA ST5/TT5 #130 Southeast Region |
The Following User Says Thank You to forwallblakmail For This Useful Post: | Goingnowherefast (03-16-2020) |
03-16-2020, 08:13 PM | #49 |
Senior Member
Join Date: Sep 2013
Drives: 23 GT4RS
Location: Western NY
Posts: 104
Thanks: 1
Thanked 17 Times in 9 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Piper has had a few different camshaft profiles available for years now, unfortunately not much info out there on what results to expect.
|
03-17-2020, 06:26 PM | #50 | |
Senior Member
Join Date: Jan 2019
Drives: 2017 BRZ PP , 2005 Saab 97X
Location: CA
Posts: 1,052
Thanks: 754
Thanked 721 Times in 405 Posts
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
|
Quote:
that said you would have to check and recheck PTV clearances |
|
The Following User Says Thank You to Clutch Dog For This Useful Post: | AllThePeat (04-22-2020) |
03-17-2020, 07:36 PM | #51 | |
Senior Member
Join Date: Sep 2013
Drives: 23 GT4RS
Location: Western NY
Posts: 104
Thanks: 1
Thanked 17 Times in 9 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Quote:
The question is what needs to be done to the fa20 head combustion chamber to match the fa24 bore, and possibly higher compression pistons if staying NA. |
|
03-17-2020, 07:40 PM | #52 | |
Senior Member
Join Date: Jan 2019
Drives: 2017 BRZ PP , 2005 Saab 97X
Location: CA
Posts: 1,052
Thanks: 754
Thanked 721 Times in 405 Posts
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
|
Quote:
its akin to sasha's 4.2 VQ motor for his Z. its so excessive but the fruits are glorious. and id not mess with the cylinder head first. from favtory they are prety decent id worry about fueling and getting everything to work together and see what sort of power it makes and then go back in and give it more intake and exhaust and see about cam timing. compression is already phat |
|
03-17-2020, 09:53 PM | #53 |
Senior Member
Join Date: Jan 2018
Drives: 2013 frs red
Location: South Florida
Posts: 3,517
Thanks: 2,520
Thanked 3,088 Times in 1,654 Posts
Mentioned: 6 Post(s)
Tagged: 1 Thread(s)
|
A good header will help auc on both sides of the peak. Aftermarket cams will introduce aftermarket problems imo.
|
03-18-2020, 11:31 AM | #54 | |
Senior Member
Join Date: Mar 2017
Drives: JRSC BRZ SOLD
Location: Ohio
Posts: 934
Thanks: 676
Thanked 739 Times in 396 Posts
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
|
Quote:
Pretty sure the head would have to be milled to match the new bore of the cylinder walls and pistons. That would lower the compression ratio and need custom pistons. Also, our exhaust ports suck but they can be lightly ported. To be fair this has already been done on by Toda 2.3L, and Monster sports 2.4L. |
|
04-21-2020, 02:17 PM | #55 |
Member
Join Date: Feb 2016
Drives: BRZ, E63 AMG, Lancer, Integra
Location: East Texas
Posts: 25
Thanks: 3
Thanked 4 Times in 4 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
Love this thread...hoping to contribute soon. Just finished removing the powerblocks(great for a stock car) and rescaling the MAF for a 3.5" Short Ram Intake. Car feels a ton better up top now, although still hard to figure the MBT without a dyno but hoping to get on one soon.
Mods: Pump E85 HKS EL 4-2-1 2.5" Overpipe De-Catted Front pipe GReddy 3" Cat-back 72mm Grams TB (on the way) Previously TRD intake w/GReddy front scoop I think it all starts with realistic expectations. In 2020 a N/A unopened K20a2(11.7:1 compression) on E85 still will churn the dyno to 220whp / 160wtq. That's really all we're going to get stock internals. Yes, I'm a bit biased as a Honda owner but we have to give it to them as far as all-motor R&D, limits being pushed etc. My High Comp(13.1) B20v that I'm building atm should give me around 240whp with the right cams. It appears the FA is pretty stout, even when matched up the the JDM K20A(Crank 220hp/160tq @11.7:1). We're not far off. Subaru, Toyota, Yamaha put together a solid engine. What I would like our community to figure out is that solid "220whp setup." I believe it'll come down to: - E85(of course) - 3"- 3.5" Intake - 1st gen intake manifold - Race Header(any de-catted will work but I think we could benefit from bigger primaries) 4-to-1 Might be ideal - Full Exhaust(honestly, I think 2.5" will do it) - Solid tuning Just a matter of WHICH parts to use. We have a bunch of upgrades/parts that really just shift the power band around. Tuners like Bill have gave these things everything(witnessed when he came down to San Antonio to tune Justin's FRS). It's going to come down to the right parts application. For example, with the Crawford Powerblocks and the 4-2-1, my Mid-range has been PHENOMENAL and a blast drive around from 2500-6500 but after that she turns into a pig, adding timing up top(2 degrees) helped a lot but (2) "mid-range power-adders" might be a bit much. Rev'ing to 7500k puts us right at the threshold of a cast piston(4500 fpm) based on a 86mm stroke, we have to side with the engineers on this one. Getting power earlier is a good thing, we're just not getting enough air in and out & I wonder if we have anything left on the table in the form of VTC tuning. Granted, I have the turbo kit sitting in the garage(Garrett G25-550), I want to hit this damn 220, just something about scraping for every HP in an all motor setup. I need some ideal plugs and gaps lol
__________________
"All wheel drive, silken V6 engines and computer controls are still poor substitutes for a perfectly tuned chassis, spell binding engine and a direct connection between the driver and car."
Last edited by Dom_J; 04-21-2020 at 02:28 PM. |
04-21-2020, 09:36 PM | #56 | |
Senior Member
Join Date: Mar 2017
Drives: JRSC BRZ SOLD
Location: Ohio
Posts: 934
Thanks: 676
Thanked 739 Times in 396 Posts
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
|
Quote:
Intake tracks larger than 3" aren't needed since we dont rev super high. RacerX tried it while prototyping their intake years ago. Not sure why you chose the 1gen IM🤔 sir. In my personal experience with the black one compared to an extrude honed MY17, the red one was the clear choice. I've run a 72mm TB in the past port matched to the IM. Easily more midrange and a little bit more top end. The MAFv increase was small enough percentage wise 3-5% in relationship to the larger area of the TB that I felt a bored over 67mm vs 65mm stock would net the same result soo that's what I currently have. No surprise that slightly modded OEM parts are a better starting point than aftermarket I suppose. |
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Delicious Tuning - Q&A EcuTeK ProECU Tuning and Maps | DeliciousTuning | Software Tuning | 1212 | 03-10-2023 11:07 PM |
Delicious Tuning | RallySTI | User/Vendor/Sponsor Reviews, Feedback, Comments | 2 | 12-02-2017 04:19 PM |
2013 Subaru BRZ Limited - Delicious Tuning Development Car, San Diego, CA | DeliciousTuning | Cars for Sale/Trade | 5 | 08-12-2016 03:27 PM |
Mann Engineering 2nd Quarter Tuning Days April 25th & 26th by Bill (Delicious Tuning) | DesertFrs | Northern California | 14 | 04-24-2014 03:15 AM |
Delicious Tuning - Dyno Tuning Weekend at Mann Engineering's (San Jose, CA) | DeliciousTuning | Announcements, Contests, Giveaways | 6 | 09-19-2013 05:55 PM |