WHAT DID YOU DO TO YOUR BRZ TODAY?

[Last Lemming Alive]

Originally Posted by kpheez

Installed these last Saturday, just in time for 86fest LOL.

Eibach R1 Coilovers + F&R Sway bars + LCA
Enkei RPF1,17x9 +35 on Falken Azenis 255/40/17, btw these wheels does not clear the front Brembo Calipers. 5mm spacer was not enough...needed 8mm


https://www.dropbox.com/s/r77tofnfjl..._1576.JPG?dl=0

Would this mean your effective offset is 27?

[trippinbillies40]

Originally Posted by Last Lemming Alive

Would this mean your effective offset is 27?

Yes. Just need them on the front though.

[Andrew025]

Kenwood DDX917WS installed.

[johan]

Originally Posted by Andrew025

Kenwood DDX917WS installed.

very curious to see how this works out for you. I've had my eye on this HU for quite some time. Do all of the steering wheel controls work?

[Andrew025]

Originally Posted by johan

very curious to see how this works out for you. I've had my eye on this HU for quite some time. Do all of the steering wheel controls work?

Yep, they all work.
You have to program the buttons (just hold it down for 2 seconds) and you can choose from a list of options of what you want the button to do.

[johan]

Originally Posted by Andrew025

Yep, they all work.
You have to program the buttons (just hold it down for 2 seconds) and you can choose from a list of options of what you want the button to do.

Do you have a full list of the hardware you bought to make this setup complete?

Obviously there's the HU and the one piece dash piece. Anything else to plug into the stock wiring?

[EdBoy]

Originally Posted by Andrew025

Kenwood DDX917WS installed.

oh nice, ive been looking into that head unit. Is it awkward to use since the main controls are positioned on the other side for rhd?

[Andrew025]

Originally Posted by johan

Do you have a full list of the hardware you bought to make this setup complete?

Obviously there's the HU and the one piece dash piece. Anything else to plug into the stock wiring?

You'll need either this 28 pin (HU comes with the 6 and 4) http://www.autoharnesshouse.com/67122.html (you'll have to de-pin the SWC from the harness that comes with the HU and put it in the harness from the link).

Or this one (looks like it has shitty reviews though)
https://www1.crutchfield.com/p_120SU...B28SWC-6V.html

Stock USB adapter if you want to use it.
AXXESS AX-SUBUSB - USB-Auxilliary Retention Harness - SUBARU 4 PIN USB ADAPTOR https://www.amazon.com/dp/B00TYK5GK6..._BPMDzbR66ARJ3

Antenna adapter.
Metra 40-LX11 Antenna Adaptor Cable - Select 2009-Up Lexus/Toyota https://www.amazon.com/dp/B003VYWSES..._dRMDzbJF4HWWT

Or you can just order it all from Auto harness house.
I had Amazon money I needed to use.

Originally Posted by EdBoy

oh nice, ive been looking into that head unit. Is it awkward to use since the main controls are positioned on the other side for rhd?

It's close enough it's not awkward to use.

[Popeye]

New wheels, tires and coilovers.

Wheels: XXR 527 18x8.75 +35 square
Tires: Nitto NT555 G2 245/40R18
Coilovers: Tein Flex A

[wolffbite]

Finished installing SARD rear seat covers.
Installed Cusco sports accelerator pedal.
Installed Helix dark smoked sidemarkers.
Dipped subaru/brz badges black.





Wish the finish was a little smoother, but it was my first time working with plastidip and I think they look great overall.

[Is Always Angry]

Originally Posted by Popeye

New wheels, tires and coilovers.

Wheels: XXR 527 18x8.75 +35 square
Tires: Nitto NT555 G2 245/40R18
Coilovers: Tein Flex A

How much lower than stock are you on those coils? Looks fantastic!

[broberg]

Picked my 2017 up today, alarm rang at 04.30, then jumped on a train and 5 hours later I drove the Subie out from the dealers

A couple of more hours later We started with some decals (+5hp) and removing some chrome from the trunk! Tomorrow I'll install the armrest I ordered last week. And a reverse camera is on order!

[Sbk Brz 17]

Installed Perrin shifter bushing and Whiteline trans mount bushing. WOW what a difference--felt it on first shift to get car off the lift. Everyone needs this Mod. Whiteline rear subframe bushing spacer kit next...

[mrg666]

Originally Posted by broberg

Picked my 2017 up today, alarm rang at 04.30, then jumped on a train and 5 hours later I drove the Subie out from the dealers

A couple of more hours later We started with some decals (+5hp) and removing some chrome from the trunk! Tomorrow I'll install the armrest I ordered last week. And a reverse camera is on order!

Congratulations and have fun!

Isn't backup camera default equipment in SWE?