Open Flash Tablet - OFT TIPS Trick’s & FAQ

[faltyda]

Originally Posted by JB86'd

You might have issues if you try to monitor things or datalog, the readings may be incorrect. How many miles have you driven on the new tune?

Not very far at all. I'll have an update after work. Thinking that I may not have let it set in as I didn't drive or warm it up after the flash

[JB86'd]

Originally Posted by faltyda

Not very far at all. I'll have an update after work. Thinking that I may not have let it set in as I didn't drive or warm it up after the flash

When you first start the car after a flash, you let it idle for at least a minute before touching the throttle. Also, it needs time to learn fuel trims, and the pedal to learn throttle input again. Give it 50-100 miles, you'll be set.

[steve99]

Originally Posted by wparsons

Yep, and yep.

The OTS 91 map and OTS 93 map are identical at lower revs, and the knock issue I have is in the low rev high load area (too much gas in the ~2500-3500rpm range). Oddly enough I get no knock on a track with 91 octane on the OTS 91 map, but I get a bunch driving in traffic.

I'm currently running an unmodified OTS 93 map on 94 octane.

yep at low loads you run more ignition timing and aso in taraffic intake air temps higher tweak the iat ignition retard values will probably sort it .

also try reducing the amout of port injetion in the problem area

[steve99]

Originally Posted by Myv

Thanks, I'll start logging and check out what can be done with it



ESSO 91 this time, I switch back and forth between ESSO and Shell.

a guy hasalready done most of the work for you see here
http://www.ft86club.com/forums/showt...47#post2216047

[Ondreiko]

Guys, will Romraider and OFT Manager work correctly with Windows 10?

[Kodename47]

Originally Posted by Ondreiko

Guys, will Romraider and OFT Manager work correctly with Windows 10?

I can confirm Romraider does.

[steve99]

not sure about windows 10 , buy the other issue is oft doesnt like usb 3 ports not sure if its software or hardware related ie you might be able to plig oft into a usb 2 hub then hub to usb3 port.

[ShadowSeraph]

Originally Posted by Ondreiko

Guys, will Romraider and OFT Manager work correctly with Windows 10?

All the above does with windows 10 + virtual dyno. To be honest, windows 10 is largely just a streamlined and different User Interface version of windows 8. Pretty much any win 8 driver or program works with win 10. I have all the above programs working well on win 10 on a laptop and desktop setup.


- your friendly forum IT guy.

[AppleSauce]

I tried to marry my oft but didnt have frs/brz option only a bmw... What do i do about this? I bought this used. Does that mean the ahole i bought it from didnt unmarry it from his car? How do i fix this?

[steve99]

Originally Posted by AppleSauce

I tried to marry my oft but didnt have frs/brz option only a bmw... What do i do about this? I bought this used. Does that mean the ahole i bought it from didnt unmarry it from his car? How do i fix this?

you should be able to select the car type from list mazda/toyota/bmw

you need to select toyota then model zn6

[ame="https://www.youtube.com/watch?feature=player_embedded&v=5tYRpJqTECk"]OFT Multi-vehicle support - YouTube[/ame]



if not you may need to update oft using the openflash manager software from the openflash website

http://openflashtablet.com/Automotiv...ads/index.html

download and install openflash manager on your windows pc connect oft and let it update then install TEMPLATE file 8.2 as per instructions on page

[AppleSauce]

yeah when i first plugged my tablet into the car it already had a bmw background. there was no option for mazda or toyota or anything just bmw. i tried downloading that file FRS/BRZ/GT86 Template File. i downloaded the windows 8 patch as well and extracted the files and ran them. not sure if there was anything else to do for that. the template file isnt doing anything... maybe im not opening it with the right software? idk i opened it with the open flash manager...

[AppleSauce]

ok i think i figured it out finally.

[Myv]

Question about the data logging, one of my files that I logged was probably quite big (40min drive to work). Every time I click on it through OFM, it just freezes (I've waited for about an hour+ before closing the process), it's probably trying to load the file into the table. Know how I can go about removing it? Or will logging more eventually overwrite this log?

[drewbot]

Originally Posted by Myv

Question about the data logging, one of my files that I logged was probably quite big (40min drive to work). Every time I click on it through OFM, it just freezes (I've waited for about an hour+ before closing the process), it's probably trying to load the file into the table. Know how I can go about removing it? Or will logging more eventually overwrite this log?

Did you update your template file? I had the same exact issue when I logged with an old template file and tried to import into a new OF manager software

Sent from my A0001 using Tapatalk