Ace 4-2-1 Header - Page 75 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

tomaszjanczak · 10-25-2016, 05:19 PM

Quote:

Originally Posted by CSG Mike

A/350 shouldn't have any fitment issues at all.

Double check to make sure all your bolts are torqued properly, and also check your other exhaust components.

I have checked everything 3 times

It really doesn't look like any exhaust component could be vibrating against something, but I can't think of anything else it could be because it started right after installing the Ace header.

bhmax · 10-25-2016, 05:33 PM

Quote:

Originally Posted by tomaszjanczak

I'm having a "rattling" or metal "buzzing" sound, like metal vibrating against metal (above ~4K RPM). I have hammered the skid plate to oblivion, there's now about 3/4" gap with the skid plate and the header, so there's no way that's the problem.

The only other spot I could see being the problem is the over pipe against the frame but that also has a fairly large gap between them and the pipes barely move even when I push on them so I see no way it would move enough to touch the frame during driving.

Has anyone else had this problem? I can't figure out what's causing it.

Is it definitely not the clutch pedal rattle that a lot of people seem to have? I get it on occasion. Press lightly on clutch pedal when it happens to see if it stops.

Reamer · 10-25-2016, 05:37 PM

Quote:

Originally Posted by tomaszjanczak

I have checked everything 3 times

It really doesn't look like any exhaust component could be vibrating against something, but I can't think of anything else it could be because it started right after installing the Ace header.

ACE FP too or just the header? Stock cat-back? If it is the 350+FP with a stock cat-back it just has a super "tinny" sound but nothing on mine was touching. If CSG+ACE can have an exhaust using their FP that isn't obnoxious and not "tinny" **mother of god**

Sent from my HTC 10 using Tapatalk

tomaszjanczak · 10-25-2016, 05:40 PM

Quote:

Originally Posted by bhmax

Is it definitely not the clutch pedal rattle that a lot of people seem to have? I get it on occasion. Press lightly on clutch pedal when it happens to see if it stops.

I don't think so, this really sounds like metal buzzing against each other. I'll try it out though.

tomaszjanczak · 10-25-2016, 05:41 PM

Quote:

Originally Posted by Reamer

ACE FP too or just the header? Stock cat-back? If it is the 350+FP with a stock cat-back it just has a super "tinny" sound but nothing on mine was touching. If CSG+ACE can have an exhaust using their FP that isn't obnoxious and not "tinny" **mother of god**

Sent from my HTC 10 using Tapatalk

I have the Ace 350 header+over pipe. Stock front pipe and Invidia Q300 cat-back

CSG Mike · 10-25-2016, 05:59 PM

Quote:

Originally Posted by Reamer

ACE FP too or just the header? Stock cat-back? If it is the 350+FP with a stock cat-back it just has a super "tinny" sound but nothing on mine was touching. If CSG+ACE can have an exhaust using their FP that isn't obnoxious and not "tinny" **mother of god**

Sent from my HTC 10 using Tapatalk

It's a pity you're not here to hear it in person...

The car is boosted, but that adds to the noise, not subtract.

Reamer · 10-25-2016, 06:13 PM

Quote:

Originally Posted by CSG Mike

It's a pity you're not here to hear it in person...

The car is boosted, but that adds to the noise, not subtract.

This guy ^^ just rubbing it in. Lol.

Sent from my HTC 10 using Tapatalk

CounterSpace Garage · 10-25-2016, 06:35 PM

Quote:

Originally Posted by Reamer

This guy ^^ just rubbing it in. Lol.

Sent from my HTC 10 using Tapatalk

Your name is Reamer. Who is reaming who?

Reamer · 10-25-2016, 06:44 PM

Quote:

Originally Posted by CounterSpace Garage

Your name is Reamer. Who is reaming who?

Touché.

Sent from my HTC 10 using Tapatalk

CounterSpace Garage · 10-25-2016, 06:53 PM

Quote:

Originally Posted by Reamer

Touché.

Sent from my HTC 10 using Tapatalk

Devilz · 10-25-2016, 08:35 PM

How much louder would my exhaust be if get CS400 with overpipe, stock fp and already I have a tomei 60r installed?

CSG Mike · 10-25-2016, 08:41 PM

Quote:

Originally Posted by Devilz

How much louder would my exhaust be if get CS400 with overpipe, stock fp and already I have a tomei 60r installed?

As long as you keep that stock FP, a few decibels. Not too much.

Devilz · 10-25-2016, 08:46 PM

oh sweet thats not too bad, makes me feel a bit better haha been wanting a set for awhile but was unsure if it would be too loud.

X Factor · 10-31-2016, 06:25 PM

ACE A/350, GrimmSpeed intake, stock front and mid pipe, 93 octane. Tuned at PRT Performance made 175 on their Mustang dyno, torque dip gone, car pulls nice and smooth now.
Dyno chart.

10-31-2016, 06:25 PM	#1050
X Factor Member Join Date: Apr 2013 Drives: 2013 Red BRZ Limited Location: Austin, TX Posts: 88 Thanks: 0 Thanked 10 Times in 6 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	ACE A/350, GrimmSpeed intake, stock front and mid pipe, 93 octane. Tuned at PRT Performance made 175 on their Mustang dyno, torque dip gone, car pulls nice and smooth now. Dyno chart. Attached Images __________________ Last edited by X Factor; 10-31-2016 at 06:42 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Who has Open Flash Header (or aftermarket UEL header) in the GTA with stock exhaust?	alanhung85	CANADA	6	10-21-2014 10:41 PM
RevWorks UEL Header + Nameless Catted Front Pipe VS Stock Gutted Header + FP	NickFRS	Engine, Exhaust, Transmission	44	04-19-2014 05:42 PM
Top Gear Solutions\| HKS Header \|Borla EL & UEL Headers\| Agency Power Header\| + MORE!	TopGearSolutions	Engine, Exhaust, Bolt-Ons	82	04-14-2014 08:16 PM
Gutted cat stock header vs aftermarket catless header NA application	stevo585	Engine, Exhaust, Transmission	8	04-04-2014 04:12 PM
Wanted: UEL header with Perrin header back and tune.	skye67	Engine, Exhaust, Transmission	7	12-21-2013 10:34 PM

10-25-2016, 08:35 PM	#1047
Devilz Member Join Date: Jan 2013 Drives: GT86 Location: Australia,Sydney Posts: 19 Thanks: 6 Thanked 5 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	How much louder would my exhaust be if get CS400 with overpipe, stock fp and already I have a tomei 60r installed?

10-25-2016, 08:46 PM	#1049
Devilz Member Join Date: Jan 2013 Drives: GT86 Location: Australia,Sydney Posts: 19 Thanks: 6 Thanked 5 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	oh sweet thats not too bad, makes me feel a bit better haha been wanting a set for awhile but was unsure if it would be too loud.

User Name		Remember Me?
Password