CAD file for subframes

[Rex1585]

I'm looking to see if anyone has CAD files for the front or rear subframes.

I'm probably going to have to make both to work within the design parameters off my project. Let me know what you guys have!

Thanks

Sent from my Pixel 7 Pro using Tapatalk

[ML]

Originally Posted by Rex1585

I'm looking to see if anyone has CAD files for the front or rear subframes.

I'm probably going to have to make both to work within the design parameters off my project. Let me know what you guys have!

Thanks

Sent from my Pixel 7 Pro using Tapatalk

I looked through onshape and couldn't find anything. did you have any success?

[Rex1585]

Originally Posted by ML

I looked through onshape and couldn't find anything. did you have any success?

I've had zero luck even with reaching out to. Q few people. I'm probably going to have to make my own scan and release it to the community

Sent from my Pixel 7 Pro using Tapatalk

[ML]

Originally Posted by Rex1585

I've had zero luck even with reaching out to. Q few people. I'm probably going to have to make my own scan and release it to the community

Sent from my Pixel 7 Pro using Tapatalk

I would be interested and can throw some beer money to you if you make it happen. I'm investigating the feasibility of swapping an rx8 front subframe into this chassis and that would help speed it along.

[Rex1585]

Originally Posted by ML

I would be interested and can throw some beer money to you if you make it happen. I'm investigating the feasibility of swapping an rx8 front subframe into this chassis and that would help speed it along.

Cool. I'll see what I can come up with, my subframe is pretty modified from what it was, but I *might* be able to clean up the scan a little bit to remove what I added.



Sent from my Pixel 7 Pro using Tapatalk

[Luns]

Originally Posted by ML

I would be interested and can throw some beer money to you if you make it happen. I'm investigating the feasibility of swapping an rx8 front subframe into this chassis and that would help speed it along.

RX8 has a narrower engine bay. I don't imagine the RX8's subframe can fit without major surgery to the body.

This thread killed any fantasies I may have harboured of bolting in a double-wishbone front suspension:

https://forums.nasioc.com/forums/sho....php?t=2887287

That said, for what I'm seeing of ToyoRati, the modifications necessary don't seem out of the question.

[ML]

Originally Posted by Luns

RX8 has a narrower engine bay. I don't imagine the RX8's subframe can fit without major surgery to the body.

This thread killed any fantasies I may have harboured of bolting in a double-wishbone front suspension:

https://forums.nasioc.com/forums/sho....php?t=2887287

That said, for what I'm seeing of ToyoRati, the modifications necessary don't seem out of the question.

I'm familiar with that build but I didn't realize how close my logic had landed with his. I want to move my k24 that far back and add the double wishbone, but I want to modify the subframe more than the chassis

[kask2_6.0]

Originally Posted by Rex1585

I've had zero luck even with reaching out to. Q few people. I'm probably going to have to make my own scan and release it to the community

Sent from my Pixel 7 Pro using Tapatalk

I will have a scan of a stock rear subframe in the next couple of weeks. Ordered a new one the other day to scan for designing some diff swap parts (GM 8.6" or Ford Super 8.8"). I don't have a front subframe but if someone were willing to bring me one I can scan it.

[Rex1585]

Originally Posted by kask2_6.0

I will have a scan of a stock rear subframe in the next couple of weeks. Ordered a new one the other day to scan for designing some diff swap parts (GM 8.6" or Ford Super 8.8"). I don't have a front subframe but if someone were willing to bring me one I can scan it.

Send me a message. I will gladly have one shipped to you.

Sent from my Pixel 7 Pro using Tapatalk

[ML]

I can chip in some money