Looking to buy 18 inch Rims.. Fitment question - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

jetrex · 10-26-2015, 11:58 AM

Hi guys, I'm looking on putting on some 18 inch rims. I really like the Blue Series rims but of course there just 17s. Im looking to go with a flush look just like the blue series. I've narrowed it down to the Ambit RE02 which are very similar but the question is what exact size should I get in 18s so it looks flush like the blue series? Thanks for the help.

ajcarson11 · 10-26-2015, 12:16 PM

You'll see i've posted a question about the RE02 as well today! I do believe that the RE02's only come in one size of 18s (18x9.5 + 38). So, does that answer your question?

go_a_way1 · 10-26-2015, 12:38 PM

Quote:

Originally Posted by jetrex

Hi guys, I'm looking on putting on some 18 inch rims. I really like the Blue Series rims but of course there just 17s. Im looking to go with a flush look just like the blue series. I've narrowed it down to the Ambit RE02 which are very similar but the question is what exact size should I get in 18s so it looks flush like the blue series? Thanks for the help.

Quote:

Originally Posted by ajcarson11

You'll see i've posted a question about the RE02 as well today! I do believe that the RE02's only come in one size of 18s (18x9.5 + 38). So, does that answer your question?

http://www.ft86club.com/forums/showthread.php?t=25177

http://www.ft86club.com/forums/showthread.php?t=7535

Go check those out guys.

kch · 10-26-2015, 01:18 PM

Quote:

Originally Posted by jetrex

Hi guys, I'm looking on putting on some 18 inch rims. I really like the Blue Series rims but of course there just 17s. Im looking to go with a flush look just like the blue series. I've narrowed it down to the Ambit RE02 which are very similar but the question is what exact size should I get in 18s so it looks flush like the blue series? Thanks for the help.

I'm not sure what you mean regarding the flushness on the s.B. The STi wheels are the exact same fitment as stock.

I don't know much about the Ambits, but I do know that the RE02 is a replica of the Enkei RS05RR. It's way cheaper than the Enkei, but I don't know how robust or reliable the Ambits will be.

FT-86 SpeedFactory · 10-26-2015, 03:36 PM

18x9.5+38 spec wheels will poke just a little up front and require some camber to fit if lowered.

Old photo of our car when we had the same spec Enkei RS05RR wheels.

ajcarson11 · 10-26-2015, 03:42 PM

Quote:

Originally Posted by FT-86 SpeedFactory

18x9.5+38 spec wheels will poke just a little up front and require some camber to fit if lowered.

Old photo of our car when we had the same spec Enkei RS05RR wheels.

Do you think that these wheels would hit the stock spring perches if on springs (and with the additional camber that you mention)?

Would coilovers be necessary for the extra clearance?

fumanchu1 · 10-26-2015, 04:40 PM

Ray's te57 extremes might be something to consider, they aren't the cheapest thing on the planet but I believe the look fits what you are after. Can't help for size though, unless you want me to take pics of how they look on mine (18x9.5).

fumanchu1 · 10-26-2015, 04:42 PM

Quote:

Originally Posted by ajcarson11

Do you think that these wheels would hit the stock spring perches if on springs (and with the additional camber that you mention)?

Would coilovers be necessary for the extra clearance?

Oem replacement springs or lowering springs? think if they are same height you will be good but if lowering springs you will need to adjust camber in order for the to fit (could be wrong) maybe someone else can chime in with more detailed info

mav1178 · 10-26-2015, 04:58 PM

Quote:

Originally Posted by fumanchu1

Oem replacement springs or lowering springs? think if they are same height you will be good but if lowering springs you will need to adjust camber in order for the to fit (could be wrong) maybe someone else can chime in with more detailed info

The location of the spring perch will remain the same relative to wheel/tire, regardless of how much you lower the car.

-alex

FT-86 SpeedFactory · 10-26-2015, 05:10 PM

Quote:

Originally Posted by ajcarson11

Do you think that these wheels would hit the stock spring perches if on springs (and with the additional camber that you mention)?

Would coilovers be necessary for the extra clearance?

Depends on how you add the camber. If you use bolts, then you would most likely hit the spring perches with the additional camber. Also, I would limit tire size to 255/35/18...

However, if you go with camber plates you would not have that issue.

campy · 10-26-2015, 05:29 PM

Quote:

Originally Posted by ajcarson11

Do you think that these wheels would hit the stock spring perches if on springs (and with the additional camber that you mention)?

Would coilovers be necessary for the extra clearance?

Quote:

Originally Posted by FT-86 SpeedFactory

18x9.5+38 spec wheels will poke just a little up front and require some camber to fit if lowered.

Old photo of our car when we had the same spec Enkei RS05RR wheels.

I've purchased these RS05RRs in that same size, and IIRC you (FT86SF) said you would need coilovers as the OEM springs are too wide to clear these wheels. I even remember seeing a pic showing the clearance between these wheels and Fortune coilovers, though I can't find that post now. Am I just imagining this?

I already had KW coilovers before installing the wheels so I'm not sure about clearance with the oem springs.

FT-86 SpeedFactory · 10-26-2015, 05:41 PM

Quote:

Originally Posted by campy

I've purchased these RS05RRs in that same size, and IIRC you (FT86SF) said you would need coilovers as the OEM springs are too wide to clear these wheels. I even remember seeing a pic showing the clearance between these wheels and Fortune coilovers, though I can't find that post now. Am I just imagining this?

I already had KW coilovers before installing the wheels so I'm not sure about clearance with the oem springs.

It all depends on the tire size. If you asked and wanted a 265 tire, then we would have confirmed that they don't work unless you use coilovers. A smaller tire give will give you the minimum amount of clearance necessary with OEM spring perches.

It's also possible that we stated that because we could not confirm at the the time for you.

fumanchu1 · 10-27-2015, 11:24 AM

Quote:

Originally Posted by mav1178

The location of the spring perch will remain the same relative to wheel/tire, regardless of how much you lower the car.

-alex

Sorry I didn't notice the spring perch part, I was talking general clearance

but yeah, what you said

Here2rock · 10-30-2015, 01:08 AM

Quote:

Originally Posted by FT-86 SpeedFactory

18x9.5+38 spec wheels will poke just a little up front and require some camber to fit if lowered.

Old photo of our car when we had the same spec Enkei RS05RR wheels.

Question from someone with no experience in cars, how do you camber? Why bother if you can fit a smaller wheel or don't lower it.

10-26-2015, 11:58 AM	#1
jetrex Member Join Date: May 2015 Drives: 2013 Scion FR-S Location: Orlando, Florida Posts: 38 Thanks: 0 Thanked 8 Times in 6 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Looking to buy 18 inch Rims.. Fitment question Hi guys, I'm looking on putting on some 18 inch rims. I really like the Blue Series rims but of course there just 17s. Im looking to go with a flush look just like the blue series. I've narrowed it down to the Ambit RE02 which are very similar but the question is what exact size should I get in 18s so it looks flush like the blue series? Thanks for the help.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
gt 86 stock 16 inch rims	yo joshman	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	30	08-26-2015 02:29 PM
Wtb: 5x100 16 inch rims	san101	Canada Classifieds	0	07-16-2015 08:42 PM
15 or 16 inch rims	EZWood	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	9	09-30-2014 01:58 PM
245/35-18 on 8.5 inch Rims	DSLeach	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	5	06-09-2014 01:30 AM
19 inch rims too big?	Liquidcell	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	18	09-03-2012 01:07 PM

10-26-2015, 12:16 PM	#2
ajcarson11 Senior Member Join Date: Jun 2015 Drives: 2013 Subaru BRZ Limited (Black) Location: Indianapolis Posts: 511 Thanks: 253 Thanked 206 Times in 149 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	You'll see i've posted a question about the RE02 as well today! I do believe that the RE02's only come in one size of 18s (18x9.5 + 38). So, does that answer your question?

10-26-2015, 03:36 PM	#5
FT-86 SpeedFactory Join Date: Jul 2012 Drives: 2013 Scion FR-S Location: Des Moines, IA Posts: 7,694 Thanks: 1,298 Thanked 3,578 Times in 1,253 Posts Mentioned: 341 Post(s) Tagged: 5 Thread(s)	18x9.5+38 spec wheels will poke just a little up front and require some camber to fit if lowered. Old photo of our car when we had the same spec Enkei RS05RR wheels.

10-26-2015, 04:40 PM	#7
fumanchu1 Senior Member Join Date: Sep 2015 Drives: 2013 Brz C38 (bought not built :P) Location: Gatineau, Qc, Canada Posts: 1,914 Thanks: 422 Thanked 1,249 Times in 802 Posts Mentioned: 8 Post(s) Tagged: 6 Thread(s)	Ray's te57 extremes might be something to consider, they aren't the cheapest thing on the planet but I believe the look fits what you are after. Can't help for size though, unless you want me to take pics of how they look on mine (18x9.5).

User Name		Remember Me?
Password