PPG Gearset

[DarkPira7e]

Originally Posted by Irace86.2.0

Fitment?

Yes. The transmission tunnel in our cars does not naturally accommodate the CD009

[Irace86.2.0]

Originally Posted by DarkPira7e

Yes. The transmission tunnel in our cars does not naturally accommodate the CD009

I think it does. I don’t think there is any clearance issues.

[PulsarBeeerz]

Originally Posted by Irace86.2.0

I think it does. I don’t think there is any clearance issues.

It clears with a small sledge hammer iirc.

[Irace86.2.0]

Originally Posted by PulsarBeeerz

It clears with a small sledge hammer iirc.

I think most people are confusing how the CD009 fits using the FA20 with how it fits with a 2JZ or LS. Those swaps always have the motor pushed closer to the firewall than the FA20, so it requires serious massaging. Minor shaving and massaging is all that someone might consider, but is likely not necessary.

https://www.ft86club.com/forums/show...=123137&page=2

Originally Posted by twag4

Also, believe it or not, it fits in there now, but just. It doesn’t leave enough room for movement. I’m pretty sure firm engine mounts will be a must.

[Kinda bored tbh]

So about the videos I have to bad vids but you can for sure hear it I’ll try and get some new ones out the thing is I’m on bald tires and getting new ones on hasn’t been easy but they get put on today which I’ll then record some videos that are good and about the cd009 swap they machine the input shaft so you later can’t only use it pretty much for the fa20 and I’m going to be building a high hp fa20 but depending on how that goes I may later switch to a jz and then my swap wouldn’t work there anyone so I didn’t go with them aswell as then being on a 4+ month back order it seems to be now and no the cd009 does not fit perfectly even if you do a jz swap or even the mazworx kit I’ve spoken with people who have done both and like someone else said you need a nice small sledge hammer for it to clear

[Kinda bored tbh]

So sorry about the bad video ik it’s terrible but I had just gotten in the car for the first drive after it was in so was just taking the videos I’ll have my GoPro on or have someone record for me Next time and I’ll have better videos out then the second video is 6th gear. Next videos I’ll get on it so you guys can see and hear the trans.