Plastic Modeling - Page 72 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Tcoat · 05-17-2021, 11:00 AM

Quote:

Originally Posted by Kaotic Lazagna

Oh, so it's really that kind of forum. Then my other patina rat-rod idea is also out. LOL.

Rat rod would be OK.
I want to do it newish stock though since I will use it on a diorama with a 1/32 WW2 plane.
Thinking to use with these figures and aircraft.

Dadhawk · 05-17-2021, 11:28 AM

Quote:

Originally Posted by Tcoat

Rat rod would be OK.
I want to do it newish stock though since I will use it on a diorama with a 1/32 WW2 plane.
Thinking to use with these figures and aircraft.

That WAC on the left has got attitude!

Ultramaroon · 05-17-2021, 11:52 AM

Quote:

Originally Posted by Dadhawk

That WAC on the left has got attitude!

Dishes piling up in the sink SMH

Kaotic Lazagna · 05-17-2021, 12:41 PM

Quote:

Originally Posted by Tcoat

Rat rod would be OK.
I want to do it newish stock though since I will use it on a diorama with a 1/32 WW2 plane.
Thinking to use with these figures and aircraft.

Just make it detailed like how you make your planes. Don't need to worry about super glossy paint, since cars back then weren't clear coated, right?

Tcoat · 05-17-2021, 12:47 PM

Quote:

Originally Posted by Kaotic Lazagna

Just make it detailed like how you make your planes. Don't need to worry about super glossy paint, since cars back then weren't clear coated, right?

Yep. Just red enamel. The thing is that it is literally a sort of car shaped lump of plastic so I will have to get really creative to even come close to looking real.

Tcoat · 05-17-2021, 12:50 PM

Quote:

Originally Posted by Ultramaroon

Dishes piling up in the sink SMH

Well at l at least two quality as portable dishwashers. Other third looks more like a built in.

Kaotic Lazagna · 05-17-2021, 02:38 PM

Quote:

Originally Posted by Tcoat

Yep. Just red enamel. The thing is that it is literally a sort of car shaped lump of plastic so I will have to get really creative to even come close to looking real.

You have the skills. I'm sure it'll turn out really good. You have money left over in the budget for styrene sheets and putty. Haha

Kaotic Lazagna · 05-17-2021, 08:20 PM

Good thing I didn't chop up the suspension like I planned on doing to lower it a mm or two.

This is dry fitting the front suspension using just tape, and just one wheel/tire combo (not the ones included in the kit). I think I'll leave it as is since this is about where I wanted it to be. I assumed based off the built pics on vendors sites with the wheels and tires that were supposed to be used, I would have had to lower it.

soundman98 · 05-17-2021, 11:38 PM

Quote:

Originally Posted by Tcoat

I think most of the guys on the site drove 1940 Fords when they were new. They would call Hum "Junior"! I think the idea of an engine swap would confuse them.

Pretty much. It is the same place where several told me that making a convincing crashed airplane was impossible. They will spend a fortune on photoetch and resin detail sets because the kit has a gauge that is a scale half inch out of position on a instrument panel. Most of them also make spotlessly clean aircraft and even tanks. I have never seen a spotlessly clean tank.

every tank is spotlessly clean once.

when it leaves the assembly line.

Tcoat · 05-21-2021, 11:47 PM

Well now we have some door cards and since in for a penny in for a pound I decided too open up the drivers door.

The carpeting in these was either a heavy textured vinyl or a very low pile carpet depending on the options. I went with the low pile carpet. The brown sections were textured using a heavy coat of TET and the stippled with an old stiff brush. hey are brown so they will be a different tone when I spray the interior beige

And here we have the "Realistic rubber tires and hubcaps as proudly proclaimed on the Amazon site! Well worth their price of $78.00.

These have t be painted black, white, body colour and two chromes. Not real sure how I will pull that off yet.

Kaotic Lazagna · 05-22-2021, 05:47 PM

"Quick and dirty" video =)

spike021 · 05-22-2021, 05:56 PM

Quote:

Originally Posted by Kaotic Lazagna

"Quick and dirty" video =)

Kaotic Lazagna · 05-31-2021, 04:11 PM

Wasn't as much orange peel this time around, but still decided to wet sand with 2000 and 2500 grit, then Scratch X, then CG V38 anyway. I did mess up on the hood when clearing and let it dry tilted, so it did create a "drip". The "cooler" pics are the before, and the "warmer" pics are after. Have not waxed anything yet.

Tcoat · 05-31-2021, 09:01 PM

Quote:

Originally Posted by Kaotic Lazagna

Wasn't as much orange peel this time around, but still decided to wet sand with 2000 and 2500 grit, then Scratch X, then CG V38 anyway. I did mess up on the hood when clearing and let it dry tilted, so it did create a "drip". The "cooler" pics are the before, and the "warmer" pics are after. Have not waxed anything yet.

I am in total awe of your gloss painting! I can't paint gloss like that to save my life.

05-17-2021, 08:20 PM	#1002
Kaotic Lazagna Senior Member Join Date: Apr 2014 Drives: GR Corolla Location: Lathrop, CA Posts: 4,926 Thanks: 3,087 Thanked 3,017 Times in 1,859 Posts Mentioned: 40 Post(s) Tagged: 2 Thread(s)	Good thing I didn't chop up the suspension like I planned on doing to lower it a mm or two. This is dry fitting the front suspension using just tape, and just one wheel/tire combo (not the ones included in the kit). I think I'll leave it as is since this is about where I wanted it to be. I assumed based off the built pics on vendors sites with the wheels and tires that were supposed to be used, I would have had to lower it. Attached Images

05-21-2021, 11:47 PM	#1004
Tcoat Senior Member Join Date: Jul 2014 Drives: 2020 Hakone Location: London, Ont Posts: 69,845 Thanks: 61,656 Thanked 108,285 Times in 46,456 Posts Mentioned: 2495 Post(s) Tagged: 50 Thread(s)	Well now we have some door cards and since in for a penny in for a pound I decided too open up the drivers door. The carpeting in these was either a heavy textured vinyl or a very low pile carpet depending on the options. I went with the low pile carpet. The brown sections were textured using a heavy coat of TET and the stippled with an old stiff brush. hey are brown so they will be a different tone when I spray the interior beige And here we have the "Realistic rubber tires and hubcaps as proudly proclaimed on the Amazon site! Well worth their price of $78.00. These have t be painted black, white, body colour and two chromes. Not real sure how I will pull that off yet. __________________ Racecar spelled backwards is Racecar, because Racecar.

05-31-2021, 04:11 PM	#1007
Kaotic Lazagna Senior Member Join Date: Apr 2014 Drives: GR Corolla Location: Lathrop, CA Posts: 4,926 Thanks: 3,087 Thanked 3,017 Times in 1,859 Posts Mentioned: 40 Post(s) Tagged: 2 Thread(s)	Wasn't as much orange peel this time around, but still decided to wet sand with 2000 and 2500 grit, then Scratch X, then CG V38 anyway. I did mess up on the hood when clearing and let it dry tilted, so it did create a "drip". The "cooler" pics are the before, and the "warmer" pics are after. Have not waxed anything yet. Attached Images

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TRD ABS Plastic Kit?	Shims	Cosmetic Modification (Interior/Exterior/Lighting)	5	07-19-2015 07:31 PM
Front lip - abs plastic	_frs	Want-To-Buy Requests	0	09-21-2014 11:11 AM
Trade my black dash plastic for your silver dash plastic thread.	F3dzo	Southeast	0	07-17-2012 10:06 PM
plastic interior	lancie	Scion FR-S / Toyota 86 GT86 General Forum	34	10-16-2011 01:02 PM

05-22-2021, 05:47 PM	#1005
Kaotic Lazagna Senior Member Join Date: Apr 2014 Drives: GR Corolla Location: Lathrop, CA Posts: 4,926 Thanks: 3,087 Thanked 3,017 Times in 1,859 Posts Mentioned: 40 Post(s) Tagged: 2 Thread(s)	"Quick and dirty" video =)

User Name		Remember Me?
Password