Traction Control and ABS 2013 BRZ

[BRZ-GT86]

Hello

i had a small accident i hit a wall and the front right of the car got hit mostly cosmetic stuff i did alignment afterwards as the steering wheel was a bit off. ever since the accident before and after the alignment the traction control turns on and the ABS work at curves that before the accident didnt turn on. some are slight and easy ones but at high speed 75mph/94 mph or a curve at 50 mph. what could it be? i tried a Veepeak OBD2 with OBDFusion but couldnt get any code.

thank you

[humfrz]

Originally Posted by BRZ-GT86

Hello

i had a small accident i hit a wall and the front right of the car got hit mostly cosmetic stuff i did alignment afterwards as the steering wheel was a bit off. ever since the accident before and after the alignment the traction control turns on and the ABS work at curves that before the accident didnt turn on. some are slight and easy ones but at high speed 75mph/94 mph or a curve at 50 mph. what could it be? i tried a Veepeak OBD2 with OBDFusion but couldnt get any code.

thank you

Hi ya, BRZ-GT86 - too bad about your accident -

Sounds to me like you should take your car into a shop and have then look at it before those nannies act up and put you into another wall.

Sorry, I'm no help.

[BRZ-GT86]

Originally Posted by humfrz

Hi ya, BRZ-GT86 - too bad about your accident -

Sounds to me like you should take your car into a shop and have then look at it before those nannies act up and put you into another wall.

Sorry, I'm no help.

thx mate at least you wrote