|
Forced Induction Turbo, Supercharger, Methanol, Nitrous |
|
Thread Tools | Search this Thread |
08-10-2016, 10:08 AM | #1 |
...Just add nauseum
Join Date: Jan 2015
Drives: 2003 (AP1) S2000
Location: Miami, FL
Posts: 545
Thanks: 310
Thanked 784 Times in 335 Posts
Mentioned: 19 Post(s)
Tagged: 1 Thread(s)
|
To Everybody installing Forced Induction
...And everybody who already did, and just can't seem to get it running right.
This applies to every kit that doesn't replace the factory intake manifold. All turbos, and all centrifugal superchargers. there is a small solenoid valve bolted to the underside of the intake manifold, pictured below. This is the EVAP purge solenoid. It has a line running from the body of the valve to the intake manifold, under the throttle body. It is not clamped in place. Many of the FI install directions miss it, many describe it poorly, and none picture it. Individuals, shops, and tuners have missed it on a regular basis. This line pops off very easily under boost. When it does, it will create a large, invisible boost leak, and all of the associated tuning problems. The line needs a 3/16" hose clamp at both ends. It doesn't hurt to clamp the line into the solenoid either. Please sticky this. @ichitaka05
__________________
There are many ways to displace.
-Spartarus |
The Following 23 Users Say Thank You to Spartarus For This Useful Post: | 86 South Africa (08-13-2017), arren123 (11-15-2016), Bonburner (09-27-2018), brybot (05-27-2019), CxG (04-08-2019), DustinS (08-10-2016), Evil Rocky (03-03-2017), go_a_way1 (09-19-2016), Kris86 (02-01-2017), LXXXV1 (10-19-2016), marco1ca (11-20-2019), Ornelas66 (07-11-2017), Remark00 (09-17-2019), Rsmith954 (02-22-2017), shr133 (02-17-2017), soundman98 (02-21-2021), Sportsguy83 (08-11-2016), steve86gt (08-11-2016), steve99 (08-03-2018), swarb (02-20-2017), Taco Man in HD (07-05-2017), Tristor (02-23-2018), whataboutbob (03-25-2021) |
08-11-2016, 01:06 PM | #2 | |
I Love custom Turbo kits
Join Date: Mar 2012
Drives: Limited BRZ
Location: Miami
Posts: 10,770
Thanks: 20,004
Thanked 8,346 Times in 4,361 Posts
Mentioned: 441 Post(s)
Tagged: 12 Thread(s)
|
Another thread for reference
http://www.ft86club.com/forums/showthread.php?t=46456 This is taken from my build thread. The easy way to clamp those stupidly located hoses: Quote:
__________________
|
|
02-20-2017, 10:40 PM | #3 | |
Member
Join Date: Sep 2015
Drives: BRZ
Location: California
Posts: 53
Thanks: 7
Thanked 7 Times in 6 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
Quote:
What happens if this happens to loosen and unplug> |
|
02-20-2017, 10:42 PM | #4 |
I Love custom Turbo kits
Join Date: Mar 2012
Drives: Limited BRZ
Location: Miami
Posts: 10,770
Thanks: 20,004
Thanked 8,346 Times in 4,361 Posts
Mentioned: 441 Post(s)
Tagged: 12 Thread(s)
|
Rough idle, vacuum and boost leak (if boosted).
__________________
|
The Following User Says Thank You to Sportsguy83 For This Useful Post: | Shanahan (01-26-2021) |
02-20-2017, 10:50 PM | #5 |
Member
Join Date: Sep 2015
Drives: BRZ
Location: California
Posts: 53
Thanks: 7
Thanked 7 Times in 6 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
i have JRSC and flexfuel and my car 2015 brz. Ran perfect for about 5 months. Now it runs a little rich on cruise and has a hard time turning on when its on full e85. on WOT, it shoots lean (17) and delivers no power sometimes(i let of the throttle right away)
took out fuel pump and put it back together but nothing. Cant figure it out. -jackson racing c38 SC -Jacksonracing dual radiator -uel, full bolt ons -DT flexfuel -DW300 pump -DW700cc injectors - |
03-03-2017, 03:31 PM | #6 |
Member
Join Date: Nov 2015
Drives: 2016 BRZ HyperBlue, 2015 WRX Red
Location: Arkansas
Posts: 44
Thanks: 12
Thanked 31 Times in 21 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Thankfully HKS supplied hose clamps and instructions to install them on the hose connected to that solenoid. It was a pain to access it, but a set of long-necked needle nose pliers helped immeasurably.
|
The Following User Says Thank You to WRX4ME For This Useful Post: | jeepmor (02-21-2021) |
05-06-2017, 06:22 PM | #7 |
Member
Join Date: Apr 2017
Drives: 2017 Subaru BRZ Yellow Series
Location: Connecticut
Posts: 27
Thanks: 2
Thanked 4 Times in 4 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Hey I have a question that kind of relates to this post. I have a stock 2017 BRZ and was thinking of turbo charging to about 350-400 HP. My question is what PCV valve should I use and where I can get it from? Some people say the STI, but other than thte dealership where can I get it online?
|
07-04-2017, 03:46 PM | #8 |
Senior Member
Join Date: Nov 2013
Drives: 23 BRZ
Location: CA
Posts: 540
Thanks: 546
Thanked 688 Times in 300 Posts
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
|
http://www.ft86club.com/forums/showt...81#post1658081
Another thread with pics. I installed clamps from the top with long needle nose. |
03-16-2018, 02:10 PM | #9 | |
Junior Member
Join Date: Mar 2018
Drives: '17 Toyota 86
Location: Oxnard
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Quote:
Are you still having issues with your SC? I'm looking into getting this one, I am trying to do as much research as possible before I take the dive. Thanks! Sent from my SM-N950U using Tapatalk |
|
03-25-2019, 10:24 PM | #10 | |
Junior Member
Join Date: Nov 2017
Drives: Subaru brz
Location: Fremont, CA
Posts: 5
Thanks: 0
Thanked 2 Times in 1 Post
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Quote:
The person that tunes my car said it was my cam gears that’s not working properly. Therefore, it it kept going back to “0” every time the tuner reflashes it while on the dyno. I’m not convince it’s the cam gears cause I can still drive it as we speak on daily basis as it is on a base map nothing to Crazy he got it up to 230whp on 10psi. Which my car has so much more potential since it’s a built motor. |
|
01-18-2021, 10:33 AM | #11 |
Member
Join Date: Dec 2018
Drives: BRZ
Location: NULL
Posts: 63
Thanks: 3
Thanked 15 Times in 11 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Just want to say I took my car to its first ever track day on the weekend and surprise surprise after pushing it for a bit on the track.
This exact same issue happened to me. Turbod hitting like 10.5psi I guess the heat eventually losens up that hose and it just gives out. It is luckily like many have said here very noticeable and the car idles very rough. |
02-21-2021, 08:54 PM | #12 |
Senior Member
Join Date: Apr 2014
Drives: 84 CJ7, 08 Duramax, 2014 FRS
Location: Oregon
Posts: 483
Thanks: 343
Thanked 129 Times in 104 Posts
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
|
HKS SC kit on the way
Have an HKS SC kit incoming and trying to dig into the details, nice to see it's covered by them. That adds confidence in the thoroughness of the kit for sure.
|
03-25-2021, 10:24 PM | #13 |
Indulgent Tormenter
Join Date: Dec 2015
Drives: 15' LTD Subaru BRZ DGM
Location: FL
Posts: 486
Thanks: 316
Thanked 128 Times in 87 Posts
Mentioned: 4 Post(s)
Tagged: 2 Thread(s)
|
I have a vacuum leak, I am Turbod and I haven't done this. It looks like there are two schools of thought here, ac compressor or throttle body. It looks simple to remove the ac compressor but no one is talking about the belt.
Is it no problem putting that ac compressor back to the stress of the belt? I hope to dig around for that leak soon.
__________________
Instagram: 86_Maul Last edited by ShadowReaper; 03-25-2021 at 10:42 PM. |
03-25-2021, 10:53 PM | #14 | |
extra what?
Join Date: Sep 2014
Drives: a 13 e8h frs
Location: vantucky, wa
Posts: 32,090
Thanks: 52,539
Thanked 36,824 Times in 19,090 Posts
Mentioned: 1111 Post(s)
Tagged: 9 Thread(s)
|
Quote:
FA20 ENGINE MECHANICAL: DRIVE BELT: REMOVAL; 2013 MY FR-S [03/2012 - ]
__________________
|
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Forced Induction | OMJM | Want-To-Buy Requests | 1 | 12-01-2015 09:21 PM |
Forced Induction HELP! | surfuxalot | Forced Induction | 22 | 06-20-2015 12:56 PM |
Forced induction for ATs? | Lokutus | Forced Induction | 10 | 02-26-2013 03:42 PM |
NOS or Forced Induction? | v3rgil | AFRICA | 1 | 11-08-2012 07:17 AM |
6AT (+) Forced Induction | RYU | Forced Induction | 18 | 09-09-2012 11:14 PM |