follow ft86club on our blog, twitter or facebook.
FT86CLUB
Ft86Club
Delicious Tuning
Register Garage Members List Calendar Search Today's Posts Mark Forums Read

Go Back   Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB > Technical Topics > Suspension | Chassis | Brakes -- Sponsored by 949 Racing

Suspension | Chassis | Brakes -- Sponsored by 949 Racing Relating to suspension, chassis, and brakes. Sponsored by 949 Racing.


User Tag List

Reply
 
Thread Tools Search this Thread
Old 05-10-2020, 06:12 AM   #1
grumpysnapper
Senior Member
 
grumpysnapper's Avatar
 
Join Date: Jan 2020
Drives: BRZ
Location: Brisbane, Australia
Posts: 351
Thanks: 308
Thanked 605 Times in 208 Posts
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
$17000 dampers vs $200 sway bar

Finally had a chance to have my suspension/driving guru take a long hard test drive with the custom Öhlins TTX/TPX dampers, over the sorts of roads that they were developed for.
After returning from the drive loop, he hopped out and said "look the dampers are absolutely amazing...but somethings not quite right".
My heart sank.
But on hearing that I had kept a hollow 18mm adjustable rear bar fitted, he smiled and said that's your problem..."just throw it away and refit the standard bar!".
Two days later on the same loop, he jumped out with a huge smile and said "that car is an absolute delight....I just wanted to keep driving all week"
Basically the new dampers and springs can do much more of the 'work', much more precisely, and independently from each other.
Stiffer sway bar, less compliance.
So the moral of the story is that even 'mega' dampers can be compromised by a sway bar. My friends view is that ideally in a perfect world you should not need a sway bar, and that it is in itself a very agricultural solution to what is usually a complex problem... in other words its at its most useful at a fine tuning level.
(NB this is only relevant to this car's (rough, fast) road driven development, I'm sure there are many other thoughts and practices with sway bars that are also legitimate)
grumpysnapper is offline   Reply With Quote
The Following 6 Users Say Thank You to grumpysnapper For This Useful Post:
bcj (05-10-2020), Code Monkey (05-10-2020), glhs386 (01-09-2023), Pat (05-10-2020), soundman98 (05-10-2020), why? (05-10-2020)
Old 05-10-2020, 06:15 AM   #2
JD001
Senior Member
 
JD001's Avatar
 
Join Date: Apr 2015
Drives: Subaru BRZ
Location: UK
Posts: 6,002
Thanks: 7,621
Thanked 6,164 Times in 3,461 Posts
Mentioned: 25 Post(s)
Tagged: 2 Thread(s)
The dampers gold plated by any chance?
JD001 is offline   Reply With Quote
The Following User Says Thank You to JD001 For This Useful Post:
manualmotive (09-20-2021)
Old 05-10-2020, 06:21 AM   #3
grumpysnapper
Senior Member
 
grumpysnapper's Avatar
 
Join Date: Jan 2020
Drives: BRZ
Location: Brisbane, Australia
Posts: 351
Thanks: 308
Thanked 605 Times in 208 Posts
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by JD001 View Post
The dampers gold plated by any chance?
Ha...sort of...
Attached Images
 
grumpysnapper is offline   Reply With Quote
The Following User Says Thank You to grumpysnapper For This Useful Post:
daskaman (05-10-2020)
Old 05-10-2020, 06:31 AM   #4
JD001
Senior Member
 
JD001's Avatar
 
Join Date: Apr 2015
Drives: Subaru BRZ
Location: UK
Posts: 6,002
Thanks: 7,621
Thanked 6,164 Times in 3,461 Posts
Mentioned: 25 Post(s)
Tagged: 2 Thread(s)
Quote:
Originally Posted by grumpysnapper View Post
Ha...sort of...
They deserve to be on show in something like this not hidden deep in an ugly wheel well:
Attached Images
  
JD001 is offline   Reply With Quote
The Following 2 Users Say Thank You to JD001 For This Useful Post:
grumpysnapper (05-10-2020), soundman98 (05-10-2020)
Old 05-10-2020, 09:49 AM   #5
bmacfrs
Senior Member
 
bmacfrs's Avatar
 
Join Date: Dec 2016
Drives: 2013 FRS
Location: Central PA
Posts: 301
Thanks: 146
Thanked 65 Times in 42 Posts
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
What front bar do you have on it?

Sent from my SM-G960U using Tapatalk
__________________
WIFE: "How can there be anything left to buy?"
bmacfrs is offline   Reply With Quote
Old 05-10-2020, 11:30 AM   #6
soundman98
ProCrastinationConsultant
 
soundman98's Avatar
 
Join Date: Sep 2013
Drives: '14 Ranger, '18 Tacoma 4Dr LB
Location: chicago-ish
Posts: 11,326
Thanks: 35,214
Thanked 13,661 Times in 6,778 Posts
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by grumpysnapper View Post
Finally had a chance to have my suspension/driving guru take a long hard test drive with the custom Öhlins TTX/TPX dampers, over the sorts of roads that they were developed for.
After returning from the drive loop, he hopped out and said "look the dampers are absolutely amazing...but somethings not quite right".
My heart sank.
But on hearing that I had kept a hollow 18mm adjustable rear bar fitted, he smiled and said that's your problem..."just throw it away and refit the standard bar!".
Two days later on the same loop, he jumped out with a huge smile and said "that car is an absolute delight....I just wanted to keep driving all week"
Basically the new dampers and springs can do much more of the 'work', much more precisely, and independently from each other.
Stiffer sway bar, less compliance.
So the moral of the story is that even 'mega' dampers can be compromised by a sway bar. My friends view is that ideally in a perfect world you should not need a sway bar, and that it is in itself a very agricultural solution to what is usually a complex problem... in other words its at its most useful at a fine tuning level.
(NB this is only relevant to this car's (rough, fast) road driven development, I'm sure there are many other thoughts and practices with sway bars that are also legitimate)
so what change did the aftermarket bar make? was it stiffer or less stiff?

i've read of a similar sentiment in other suspension posts, where people get fixated on controlling body roll in corners, and start trying to to beef up the sway bars to counteract the physics of body roll without taking any time to understand how it negatively affects specific corner dampening that can have a much larger effect on overall performance.
__________________
"The time you enjoy wasting is not wasted time"
soundman98 is offline   Reply With Quote
The Following User Says Thank You to soundman98 For This Useful Post:
Opie (05-11-2020)
Old 05-10-2020, 11:47 AM   #7
NoHaveMSG
Senior Member
 
NoHaveMSG's Avatar
 
Join Date: Jan 2018
Drives: Crapcan
Location: Oregon
Posts: 11,118
Thanks: 18,090
Thanked 16,253 Times in 7,346 Posts
Mentioned: 106 Post(s)
Tagged: 0 Thread(s)
Garage
Quote:
Originally Posted by soundman98 View Post
so what change did the aftermarket bar make? was it stiffer or less stiff?

i've read of a similar sentiment in other suspension posts, where people get fixated on controlling body roll in corners, and start trying to to beef up the sway bars to counteract the physics of body roll without taking any time to understand how it negatively affects specific corner dampening that can have a much larger effect on overall performance.
18mm hollow would be stiffer than stock.
__________________
"Experience is the hardest kind of teacher. It gives you the test first and the lesson afterward." -Oscar Wilde.
NoHaveMSG is offline   Reply With Quote
The Following 2 Users Say Thank You to NoHaveMSG For This Useful Post:
grumpysnapper (05-10-2020), soundman98 (05-10-2020)
Old 05-10-2020, 12:46 PM   #8
Irace86.2.0
Senior Member
 
Irace86.2.0's Avatar
 
Join Date: Mar 2017
Drives: Q5 + BRZ + M796
Location: Santa Rosa, CA
Posts: 7,882
Thanks: 5,665
Thanked 5,802 Times in 3,297 Posts
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
In an ideal world, wouldn’t active dampers dynamically reduce roll by increasing dampening on the inner wheels and reducing rebound on the outer wheels, and roll bars wouldn’t be needed?

So are these dampers softer, equal to or stiffer than stock? Seems like there is always the debate of soft springs with stiff sway bars or stiff springs with soft sway bars, but not stiff n stiff or soft n soft. The idea of soft dampeners is to have a compliant ride and better vertical suspension travel with a stiff sway bar for reduced movement under lateral loads. How would you describe your setup?
__________________
My Build | K24 Turbo Swap | *K24T BRZ SOLD*
Irace86.2.0 is offline   Reply With Quote
Old 05-10-2020, 12:53 PM   #9
churchx
Senior Member
 
churchx's Avatar
 
Join Date: Mar 2015
Drives: 2014 GT86
Location: Latvia, Riga
Posts: 4,333
Thanks: 696
Thanked 2,085 Times in 1,436 Posts
Mentioned: 53 Post(s)
Tagged: 1 Thread(s)
@Irace86.2.0 : check this thread.
churchx is offline   Reply With Quote
The Following User Says Thank You to churchx For This Useful Post:
Irace86.2.0 (05-10-2020)
Old 05-10-2020, 01:33 PM   #10
norcalpb
Senior Member
 
norcalpb's Avatar
 
Join Date: Oct 2013
Drives: 2013 BRZ, 2023 Model 3
Location: SF Bay Area
Posts: 2,289
Thanks: 1,208
Thanked 853 Times in 565 Posts
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
If you think the stock rear bar (14mm) is compliant, you should check out the Mann Engineering rear bar. It is amazing on ultra rough canyon roads.
norcalpb is offline   Reply With Quote
The Following User Says Thank You to norcalpb For This Useful Post:
grumpysnapper (05-10-2020)
Old 05-10-2020, 03:09 PM   #11
Irace86.2.0
Senior Member
 
Irace86.2.0's Avatar
 
Join Date: Mar 2017
Drives: Q5 + BRZ + M796
Location: Santa Rosa, CA
Posts: 7,882
Thanks: 5,665
Thanked 5,802 Times in 3,297 Posts
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Perfect off-road suspension.



__________________
My Build | K24 Turbo Swap | *K24T BRZ SOLD*
Irace86.2.0 is offline   Reply With Quote
Old 05-10-2020, 04:08 PM   #12
Racecomp Engineering
 
Join Date: Nov 2011
Drives: 2016 BRZ, 2012 Paris Di2 & 2018 STI
Location: Severn, MD
Posts: 5,393
Thanks: 3,405
Thanked 7,233 Times in 2,957 Posts
Mentioned: 303 Post(s)
Tagged: 9 Thread(s)
Send a message via AIM to Racecomp Engineering
Dampers are generally not intended to control body roll.

I'm considering softer than stock front and rear bars for my car, but that's for gravel. It may make things a little worse on tarmac. Cusco has a 16mm front bar and a hollow 14mm rear (and there's the Mann bar).

Just for kicks...check out the landings in this video. Very different damper valving than what you see on a good road course set up!



- Andrew
Racecomp Engineering is offline   Reply With Quote
The Following 3 Users Say Thank You to Racecomp Engineering For This Useful Post:
Capt Spaulding (05-10-2020), grumpysnapper (05-10-2020), Irace86.2.0 (05-10-2020)
Old 05-10-2020, 04:15 PM   #13
churchx
Senior Member
 
churchx's Avatar
 
Join Date: Mar 2015
Drives: 2014 GT86
Location: Latvia, Riga
Posts: 4,333
Thanks: 696
Thanked 2,085 Times in 1,436 Posts
Mentioned: 53 Post(s)
Tagged: 1 Thread(s)
Irace86.2.0: dynamically adjustable suspension indeed is about perfect for performing it's function, no wonder active suspension was banned in F1 due providing great unfare advantage. But there are few "buts"/cons aswell. Especially so in light of use for common, daily driving applications. Not just cost/complexity, but also wear. One thing something overhauled between every race, another - which should last at least 20K miles, while not costing arm and leg. Be adjustment via air, hydraulic, turning knobs like in EDFC, or magnetorhelogical, or electromagnetic linear motors as in mentioned Bose system. All cost a lot, add complexity (thus things to potentially fail), and last less then "classic" dampers. Which, given high enough budget can perform rather well even without dynamic adjustment, if that budget is invested in quality & fine tuning or custom designing for a use. It might loose on some points while also win or not have some cons in other areas. And as dynamically proactively adjustable suspension is such a rare appearance, my hunch tells me that market has voted that on average as overall product/as compromise, pros are not that good and cons are serious enough.

@Racecomp Engineering: well, tarmac rally setup also is beast on it's own
churchx is offline   Reply With Quote
The Following User Says Thank You to churchx For This Useful Post:
Racecomp Engineering (05-11-2020)
Old 05-10-2020, 04:52 PM   #14
Irace86.2.0
Senior Member
 
Irace86.2.0's Avatar
 
Join Date: Mar 2017
Drives: Q5 + BRZ + M796
Location: Santa Rosa, CA
Posts: 7,882
Thanks: 5,665
Thanked 5,802 Times in 3,297 Posts
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by churchx View Post
Irace86.2.0: dynamically adjustable suspension indeed is about perfect for performing it's function, no wonder active suspension was banned in F1 due providing great unfare advantage. But there are few "buts"/cons aswell. Especially so in light of use for common, daily driving applications. Not just cost/complexity, but also wear. One thing something overhauled between every race, another - which should last at least 20K miles, while not costing arm and leg. Be adjustment via air, hydraulic, turning knobs like in EDFC, or magnetorhelogical, or electromagnetic linear motors as in mentioned Bose system. All cost a lot, add complexity (thus things to potentially fail), and last less then "classic" dampers. Which, given high enough budget can perform rather well even without dynamic adjustment, if that budget is invested in quality & fine tuning or custom designing for a use. It might loose on some points while also win or not have some cons in other areas. And as dynamically proactively adjustable suspension is such a rare appearance, my hunch tells me that market has voted that on average as overall product/as compromise, pros are not that good and cons are serious enough.

@Racecomp Engineering: well, tarmac rally setup also is beast on it's own
I think it will trickle down. It is in use in the Audi S8 and other cars. With Lidar and other camera tech becoming mainstream, active suspension will eventually make it into cheaper cars just like active diffs, active suspension has worked its way down, just like ABS and other systems before them.
__________________
My Build | K24 Turbo Swap | *K24T BRZ SOLD*
Irace86.2.0 is offline   Reply With Quote
The Following User Says Thank You to Irace86.2.0 For This Useful Post:
Capt Spaulding (05-10-2020)
 
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
WRX rear sway bar: good front sway bar combo? LerpK Suspension | Chassis | Brakes -- Sponsored by 949 Racing 12 11-11-2016 06:02 PM
FS: 2013 BRZ Premium - 6MT - Asking $17000 OBO Mageep Cars for Sale/Trade 9 03-18-2016 06:03 PM
2013 Asphalt FR-S 30,000 miles AT - $17000 Dreamshot Cars for Sale/Trade 3 11-17-2015 10:39 PM
WTB: Rear sway end links or sway bar with endlinks JoeBoxer Want-To-Buy Requests 1 08-03-2015 01:20 PM
Say no to SWAY with our Anti-Sway Bar and Sway Bar Bushing Special. FRSport.com Brakes, Suspension, Chassis 0 01-23-2015 12:38 PM


All times are GMT -4. The time now is 09:39 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.

Garage vBulletin Plugins by Drive Thru Online, Inc.