**PHASTEK** Winjet JDM Replica Headlight and Tail Light Thread

[PhastekSport]

We have many of the Winjet FRS / BRZ items in stock now. Tail lights are in limited supply so please PM with your inquiries.

12/18 - On our second batch of headlights.

There are two available models:

• Chrome
• Black

With this headlight, both should be a hit.

Update information 11/26:

• Confirmed DRL. Functions just like the JDM version of the light. It is wired to come on as a DRL. It will take the low voltage signal from the high beam (9005) connector. For those of you who disabled your DRLs by disconnecting the resistor on the passenger side, you would need to plug this back in to regain functionality.
• Pricing can now be published.

Black - $454.95
Chrome - $445.95

12/18 - The "cyber" discount code is worth 6% so this lowers the current cost to:

$419.19 and $427.65

--------

Purchase here:

http://www.phasteksport.com/SearchRe...+headlight+jdm

----------------------------

It was a pleasure meeting with the Winjet booth @ SEMA 2013. They have a few goodies that I think will interest owners here.



Winjet Booth Video

[ame="http://youtu.be/57NxtXiG65o"]https://www.youtube.com/watch?v=pj84fdePWa8[/ame]

Picture Media




























The headlights are JDM replicas. This means no halos, no turn signals etc. For the tails, there are 4 colors available including smoked lens over black housing and red lens over black housing.

The projector is currently h7. This is most likely the same projector used in the Spyder lights as well.

Bi Xenon high beam and low beam. Think Mishimoto retrofit... Cutoff will most likely be not as sharp but "acceptable" for most.

Here's a straight plug and play kit I used in an h7 halogen projector:



These lights are made in Taiwan. Don't be surprised if they all share the exact same projector.

EDIT:





Setting these up with an HID kit will be easy!

[sirsol66]

Price to 48108?

[MemphisR]

Chrome to 98295

[PhastekSport]

All inquiries have been responded to via PM / e-mail.

I do have some pictures of the chrome.





We will also be getting tail lights:

[post_break]

Chrome to well, you know.

[Code:Red]

Thank you for your prompt response!

Damn, the chrome ones look good!

[PhastekSport]

Another nice feature....

[toby714]

price shipped to 92843 for black and chrome

[j2digit]

black housing shipped to 95008 pls.....

[SleePi]

black shiped to 90031

[boucher]

Black to 70669 plz.k.thnx

[HATED1]

Thank you for the PM, I am interested in purchasing the chrome version. However would you be able to answer these questions.

1. Will this be plug and play? ease of installation?
2. I assume that the lights above the main headlight are activated automatically as a DRL function correct?
3. Would you happen to have a video of the projectors going through their different modes? DRL, parking lights, low beam, high beam?

thanks for any information you may provide.

[PhastekSport]

Update information 11/26:

• Confirmed DRL. Functions just like the JDM version of the light. It is wired to come on as a DRL. It will take the low voltage signal from the high beam (9005) connector. For those of you who disabled your DRLs by disconnecting the resistor on the passenger side, you would need to plug this back in to regain functionality.
• Pricing can now be published.

Black - $454.95
Chrome - $445.95

Purchase here:

http://www.phasteksport.com/SearchRe...+headlight+jdm

To those who have already ordered, your pricing will be updated and refunds sent out immediately. Thank you.

--------

I can do custom invoices for those who want to put a deposit only. The only benefit of paying in full will be that those orders will ship immediately upon receipt of our stock order. Everyone else will be contacted the same day and asked for an authorization for the remaining amount. Those orders do have the potential to go out the same day if you are available to authorize the charge immediately.

[PhastekSport]

Originally Posted by HATED1

Thank you for the PM, I am interested in purchasing the chrome version. However would you be able to answer these questions.

thanks for any information you may provide.

1. Will this be plug and play? ease of installation?

These will be plug and play. The hardest part of the installation will be removing the sidemarkers to remove the front bumper honestly.

2. I assume that the lights above the main headlight are activated automatically as a DRL function correct?

Your assumption is 100% on point. They made these to function like the JDM version. They'll take the 9005 high beam plug which controls the DRL and use that.

3. Would you happen to have a video of the projectors going through their different modes? DRL, parking lights, low beam, high beam?

I do not as I have not received the lights yet. This is how they will function though.

Start the car and drop the parking brake. DRLs are on.

Turn the parking lights. DRL is off.

Low beam turned on. DRL is off.

High beam turned on (you'll hear the mechanical flap drop for those). DRL is on.