|
Mechanical Maintenance (Oil, Fluids, Break-In, Servicing) Everything related to the mechanical maintenance of the FR-S and BRZ |
|
Thread Tools | Search this Thread |
09-08-2024, 08:28 AM | #15 |
Senior Member
Join Date: Apr 2020
Drives: 2018 BRZ
Location: Dayton, OH
Posts: 958
Thanks: 1,409
Thanked 812 Times in 464 Posts
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
|
Final update (I hope) - after 100 miles, the left side boot indeed started leaking at the big clamp (flinging blobs of good grease around), and the small clamps continued to seep a bit of liquified grease.
Took the axles off the diff, disassembled the diff side CV joint, replaced the boot and clamps with the Subaru kit and used Redline CV-2 instead of the Subaru grease. I was lazy and did it on the car (without removing the axle nut and pulling the axle from the hub), but that was just fine and saved me the hassle of dealing with the axle nut. I started from trying to drop the diff, but that didn't work out so well and started leaking diff fluid (as I couldn't keep the diff level). Bolted the diff back to the car and instead went from the hubs - two bolts removed and it was pretty easy taking the axles out of the diff. The biggest struggle was actually getting the axles back into the diff. At first I hammered on the hub side (piece of wood on the axle nut), but that didn't do much. Then I hammered a large screwdriver on the small lip on the axle at the diff side and that went right in. Last edited by Ohio Enthusiast; 09-08-2024 at 08:51 AM. |
09-12-2024, 08:13 AM | #16 | |
Senior Member
Join Date: Jun 2012
Drives: '13 BRZ TLM Spec
Location: Florida
Posts: 1,978
Thanks: 1,632
Thanked 2,369 Times in 1,017 Posts
Mentioned: 115 Post(s)
Tagged: 0 Thread(s)
|
Quote:
__________________
2013 BRZ Premium 6MT - Track Car, 2020 GMC Canyon Denali Duramax, 2021 Forester Sport, 2016 Crosstrek, 2000 Subaru Legacy B4 RSK 5MT (JDM Import)
|
|
09-12-2024, 09:18 AM | #17 | |
Senior Member
Join Date: Apr 2020
Drives: 2018 BRZ
Location: Dayton, OH
Posts: 958
Thanks: 1,409
Thanked 812 Times in 464 Posts
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
|
Quote:
Edit: now that you mention it, the repair manual specifies 80-90 grams on the CV joint itself, and an additional 20-30 grams in the boot. I think I probably did less on the CV joint and more in the boot, but hopefully that'll even out when driving. Note to self - thoroughly read the instructions in the repair manual instead of trying to figure stuff on my own... |
|
09-12-2024, 03:24 PM | #18 | |
Senior Member
Join Date: Jun 2012
Drives: '13 BRZ TLM Spec
Location: Florida
Posts: 1,978
Thanks: 1,632
Thanked 2,369 Times in 1,017 Posts
Mentioned: 115 Post(s)
Tagged: 0 Thread(s)
|
Quote:
__________________
2013 BRZ Premium 6MT - Track Car, 2020 GMC Canyon Denali Duramax, 2021 Forester Sport, 2016 Crosstrek, 2000 Subaru Legacy B4 RSK 5MT (JDM Import)
Last edited by Opie; 09-16-2024 at 10:59 AM. |
|
The Following User Says Thank You to Opie For This Useful Post: | Ohio Enthusiast (09-13-2024) |
09-13-2024, 11:04 PM | #20 |
extra what?
Join Date: Sep 2014
Drives: a 13 e8h frs
Location: vantucky, wa
Posts: 32,100
Thanks: 52,554
Thanked 36,840 Times in 19,098 Posts
Mentioned: 1111 Post(s)
Tagged: 9 Thread(s)
|
is it the grease, or air trapped in with it? I don't get grease expanding to the point of squeezing out. Trapped air, however... o.0
__________________
|
The Following User Says Thank You to Ultramaroon For This Useful Post: | blsfrs (09-16-2024) |
09-16-2024, 11:01 AM | #21 |
Senior Member
Join Date: Jun 2012
Drives: '13 BRZ TLM Spec
Location: Florida
Posts: 1,978
Thanks: 1,632
Thanked 2,369 Times in 1,017 Posts
Mentioned: 115 Post(s)
Tagged: 0 Thread(s)
|
I think it's the amount of grease, too much and the rotation forces a clump into one side, making the boot flex until it comes out.
__________________
2013 BRZ Premium 6MT - Track Car, 2020 GMC Canyon Denali Duramax, 2021 Forester Sport, 2016 Crosstrek, 2000 Subaru Legacy B4 RSK 5MT (JDM Import)
|
The Following User Says Thank You to Opie For This Useful Post: | Ultramaroon (09-16-2024) |
09-16-2024, 01:58 PM | #22 |
Senior Member
Join Date: Dec 2018
Drives: 2013 frs base
Location: central Virginia
Posts: 1,240
Thanks: 2,020
Thanked 1,163 Times in 560 Posts
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
|
Prolly too much grease. I did the vent tube trick and it still blew. I was the left one. I wrapped my exhaust pipe after the last issue and have been good.
|
The Following User Says Thank You to blsfrs For This Useful Post: | Ultramaroon (09-16-2024) |
|
|
Thread Tools | Search this Thread |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Diff Fluid Leaking after Axle and Axle Seal Replacement | jaygushi | Engine, Exhaust, Transmission | 3 | 12-21-2023 01:53 PM |
Best source for axle boots | blsfrs | Suspension | Chassis | Brakes -- Sponsored by 949 Racing | 18 | 09-28-2022 03:58 PM |
Dss axle boots riped | IsaiahW | Engine, Exhaust, Transmission | 0 | 07-09-2022 10:42 AM |
AutoStyled - Hand-Crafted Shift Knobs/Shift Boots/Brake Boots Are Now Here! | RallySport Direct | Interior Parts (Incl. Lighting) | 4 | 06-23-2017 01:37 PM |