Another V8 Swap - Page 34 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

DustinS · 04-26-2017, 12:41 PM

2.5" back to 3" Greddy Exhaust. I may switch to 3" after it clear the subframe and everything in the future, but for right now I have the 2.5" on hand and the welding material for it.

all4spl · 04-26-2017, 12:56 PM

And you're saying there is no room to put a 3" vband on the header itself? I might need to see a picture to see how close it is to the steering shaft like youre saying.

DustinS · 04-26-2017, 01:08 PM

I'll get the tape measure out and try and get better pictures if weather permits. If not, it may be tomorrow before I can get under the car.

edit: To clarify, Passenger side can fit whatever you want. TONS of room. The way the driver side header exits, it is extremely tight and not even enough space for a smooth 2.5" bend without a weird bend. I'll probably just get a video to try and show it better.

all4spl · 04-26-2017, 03:31 PM

I'm wondering if this is a better option
https://www.summitracing.com/parts/h...FUw2gQodjhkJ6w

You can either have 1 7/8 and 2.5" collector or 1 3/4 and 3" collector with possibly no fitment issues as we all know corvettes have little to no room.

all4spl · 04-26-2017, 03:32 PM

and it looks like you wouldn't have any issues with plug wires on the C6 blackhearts.

DustinS · 04-26-2017, 03:48 PM

Yes I think those would be a good set to go with.

all4spl · 04-26-2017, 04:53 PM

a bit more expensive though haha I'm interested in seeing what you come up with.

DustinS · 04-27-2017, 11:27 AM

Storming so I only got a little bit done last night. Wrapped the passenger side manifold. That was a nightmare. Assembled the fuel rails, and the pressure regulator.

[/url]

DustinS · 04-27-2017, 01:54 PM

Well after drawing up a template for the Clutch Master adapter, I went ahead and ordered the Rywire one. Looked close enough to me and a few friends I trust. Guess we will find out here in a bit.

Zer0 · 04-27-2017, 03:26 PM

[QUOTE=DustinS;2900110]Well after drawing up a template for the Clutch Master adapter, I went ahead and ordered the Rywire one. Looked close enough to me and a few friends I trust. Guess we will find out here in a bit.

If it doesn't fit just right you can machine aluminum with a router. I made a adapter for a Wilwood master cylinder for my FRS to get rid of the power brakes.

DustinS · 04-27-2017, 03:51 PM

That was the plan. Slot the holes a bit if it doesn't fit. If it isn't anywhere close, I will just have a friend machine one up. How does the car do without the booster?

all4spl · 04-27-2017, 04:12 PM

how does the brake booster delete work? Do you still have abs? I'm interested in doing this.

all4spl · 04-27-2017, 04:50 PM

also it looks like the CX racing kit wont work with the sway bar either. according to @Ryaquinn anyways.

Sportsguy83 · 04-27-2017, 05:54 PM

@Amir Ghadiri's car was used to design the CX racing kit, perhaps he could clarify about the swaybar fitment?

This is the only picture I could find on his journal that shows the swaybar..

04-26-2017, 12:41 PM	#463
DustinS Senior Member Join Date: Apr 2014 Drives: 2013 Ultramarine FR-S Location: Springfield, MO Posts: 1,948 Thanks: 2,539 Thanked 1,414 Times in 804 Posts Mentioned: 31 Post(s) Tagged: 3 Thread(s)	2.5" back to 3" Greddy Exhaust. I may switch to 3" after it clear the subframe and everything in the future, but for right now I have the 2.5" on hand and the welding material for it. __________________

04-26-2017, 01:08 PM	#465
DustinS Senior Member Join Date: Apr 2014 Drives: 2013 Ultramarine FR-S Location: Springfield, MO Posts: 1,948 Thanks: 2,539 Thanked 1,414 Times in 804 Posts Mentioned: 31 Post(s) Tagged: 3 Thread(s)	I'll get the tape measure out and try and get better pictures if weather permits. If not, it may be tomorrow before I can get under the car. edit: To clarify, Passenger side can fit whatever you want. TONS of room. The way the driver side header exits, it is extremely tight and not even enough space for a smooth 2.5" bend without a weird bend. I'll probably just get a video to try and show it better. __________________ Last edited by DustinS; 04-26-2017 at 01:23 PM.

04-26-2017, 03:48 PM	#468
DustinS Senior Member Join Date: Apr 2014 Drives: 2013 Ultramarine FR-S Location: Springfield, MO Posts: 1,948 Thanks: 2,539 Thanked 1,414 Times in 804 Posts Mentioned: 31 Post(s) Tagged: 3 Thread(s)	Yes I think those would be a good set to go with. __________________

04-27-2017, 11:27 AM	#470
DustinS Senior Member Join Date: Apr 2014 Drives: 2013 Ultramarine FR-S Location: Springfield, MO Posts: 1,948 Thanks: 2,539 Thanked 1,414 Times in 804 Posts Mentioned: 31 Post(s) Tagged: 3 Thread(s)	Storming so I only got a little bit done last night. Wrapped the passenger side manifold. That was a nightmare. Assembled the fuel rails, and the pressure regulator. [/url] [/url] [/url] __________________

04-27-2017, 01:54 PM	#471
DustinS Senior Member Join Date: Apr 2014 Drives: 2013 Ultramarine FR-S Location: Springfield, MO Posts: 1,948 Thanks: 2,539 Thanked 1,414 Times in 804 Posts Mentioned: 31 Post(s) Tagged: 3 Thread(s)	Well after drawing up a template for the Clutch Master adapter, I went ahead and ordered the Rywire one. Looked close enough to me and a few friends I trust. Guess we will find out here in a bit. __________________

04-26-2017, 12:56 PM	#464
all4spl Senior Member Join Date: Mar 2016 Drives: 2013 FR-S Location: Chesapeake, VA Posts: 400 Thanks: 61 Thanked 78 Times in 60 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	And you're saying there is no room to put a 3" vband on the header itself? I might need to see a picture to see how close it is to the steering shaft like youre saying.

04-26-2017, 03:31 PM	#466
all4spl Senior Member Join Date: Mar 2016 Drives: 2013 FR-S Location: Chesapeake, VA Posts: 400 Thanks: 61 Thanked 78 Times in 60 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	I'm wondering if this is a better option https://www.summitracing.com/parts/h...FUw2gQodjhkJ6w You can either have 1 7/8 and 2.5" collector or 1 3/4 and 3" collector with possibly no fitment issues as we all know corvettes have little to no room.

04-26-2017, 03:32 PM	#467
all4spl Senior Member Join Date: Mar 2016 Drives: 2013 FR-S Location: Chesapeake, VA Posts: 400 Thanks: 61 Thanked 78 Times in 60 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	and it looks like you wouldn't have any issues with plug wires on the C6 blackhearts.

04-26-2017, 04:53 PM	#469
all4spl Senior Member Join Date: Mar 2016 Drives: 2013 FR-S Location: Chesapeake, VA Posts: 400 Thanks: 61 Thanked 78 Times in 60 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	a bit more expensive though haha I'm interested in seeing what you come up with.

04-27-2017, 03:26 PM	#472
Zer0 Senior Member Join Date: Sep 2015 Drives: 2015 frs Location: Ca Posts: 511 Thanks: 426 Thanked 196 Times in 148 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	[QUOTE=DustinS;2900110]Well after drawing up a template for the Clutch Master adapter, I went ahead and ordered the Rywire one. Looked close enough to me and a few friends I trust. Guess we will find out here in a bit. If it doesn't fit just right you can machine aluminum with a router. I made a adapter for a Wilwood master cylinder for my FRS to get rid of the power brakes.

04-27-2017, 03:51 PM	#473
DustinS Senior Member Join Date: Apr 2014 Drives: 2013 Ultramarine FR-S Location: Springfield, MO Posts: 1,948 Thanks: 2,539 Thanked 1,414 Times in 804 Posts Mentioned: 31 Post(s) Tagged: 3 Thread(s)	That was the plan. Slot the holes a bit if it doesn't fit. If it isn't anywhere close, I will just have a friend machine one up. How does the car do without the booster? __________________

04-27-2017, 04:12 PM	#474
all4spl Senior Member Join Date: Mar 2016 Drives: 2013 FR-S Location: Chesapeake, VA Posts: 400 Thanks: 61 Thanked 78 Times in 60 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	how does the brake booster delete work? Do you still have abs? I'm interested in doing this.

04-27-2017, 04:50 PM	#475
all4spl Senior Member Join Date: Mar 2016 Drives: 2013 FR-S Location: Chesapeake, VA Posts: 400 Thanks: 61 Thanked 78 Times in 60 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	also it looks like the CX racing kit wont work with the sway bar either. according to @Ryaquinn anyways.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pentosin Trans Fluid Swap \| Motul 300 Diff Swap \| Impressions	Dezoris	Mechanical Maintenance (Oil, Fluids, Break-In, Servicing)	15	06-06-2017 10:54 PM
Ls or 2jz swap?	sgoldberg01	BRZ First-Gen (2012+) -- General Topics	13	03-22-2016 03:07 PM
Rod Swap	protpibe	Engine, Exhaust, Transmission	6	10-21-2015 11:38 PM
AT-->MT swap	AlwaysSideways	Want-To-Buy Requests	3	12-15-2014 11:14 AM
Should I swap?	michaelahess	BRZ First-Gen (2012+) -- General Topics	8	06-12-2012 07:32 PM

User Name		Remember Me?
Password