DIY Tapturn Flasher Install with Strobe Option - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

KAR · 10-19-2013, 03:23 PM

first off I would like to thank @scottmcphee from tapturn for making this a reality..

BEST USE WITH LED TURN SIGNALS

Go to Page...
@
scottmcphee

If you have done or replaced your flasher already, you will not need these DIY for this is an actual PLUG n PLAY product.

Here is a pic of the new flasher

compared to stock

KAR · 10-19-2013, 03:39 PM

for the Install, pretty straight forward
you can reach under the steering wheel to install but Im showing you guys where it is located.
first I pull off the side panel on the driverside

KAR · 10-19-2013, 03:44 PM

there is A screw inside the panel and underneath the dash right below the ignition.. remove them and gently pull back the under panel

KAR · 10-19-2013, 03:50 PM

now you can see where the flasher is. I use a small screw driver to unclip the flasher from its mount.. you stick it in to unclip its from it mount and push from behind towards the rear of the car.

unplug the stock one and plug the tapturn flasher and your done

KAR · 10-19-2013, 03:53 PM

end results, click on image to see the video

keep in mind you can use this as regular Tapturn flasher and has the function as the regular flasher, you just need to swith it off, you can also flick a switch to where these function will only work with the car OFF

KAR · 10-19-2013, 09:09 PM

Photobucket sucks, videos are slow..

Enraged21 · 10-20-2013, 10:05 AM

looks cool though

JPxM0Dz · 10-20-2013, 11:54 AM

This is a 120 second mod. Lay down under dash with flash light. Disconnent cable from stock relay. Use a cable tie to secure the the new relay leaving the stock relay alone. Plug in harness. It doesn't need to be anymore complicated than that

Sent from my GT-I9500 using Tapatalk

scottmcphee · 10-20-2013, 07:07 PM

Quote:

Originally Posted by KAR

Photobucket sucks, videos are slow..

I posted up some video (on youtube) of a unit like this working in a test vehicle (my car!). Youtube shows the action a little smoother like it really is.

http://www.ft86club.com/forums/showp...&postcount=172

KAR · 10-20-2013, 07:40 PM

Quote:

Originally Posted by scottmcphee

I posted up some video (on youtube) of a unit like this working in a test vehicle (my car!). Youtube shows the action a little smoother like it really is.

http://www.ft86club.com/forums/showp...&postcount=172

Send me your email and I'll email the video to you

scottmcphee · 10-23-2013, 12:57 AM

Done

Thanks!

ReThink · 11-15-2013, 02:22 AM

Strobe option...I already have a Tapturn Flasher, but how do I get one of these with this strobe option?

scottmcphee · 11-15-2013, 10:14 AM

Quote:

Originally Posted by ReThink

Strobe option...I already have a Tapturn Flasher, but how do I get one of these with this strobe option?

PM me !

xDBOYx · 11-15-2013, 04:29 PM

Quote:

Originally Posted by scottmcphee

PM me !

same here i already have the tapturn.... sending pm

10-19-2013, 03:23 PM	#1
KAR Senior Member Join Date: Jul 2012 Drives: Whiteout 6spd Location: NJ Posts: 489 Thanks: 21 Thanked 163 Times in 100 Posts Mentioned: 17 Post(s) Tagged: 1 Thread(s)	DIY Tapturn Flasher Install with Strobe Option first off I would like to thank @scottmcphee from tapturn for making this a reality.. BEST USE WITH LED TURN SIGNALS Go to Page... @ scottmcphee If you have done or replaced your flasher already, you will not need these DIY for this is an actual PLUG n PLAY product. Here is a pic of the new flasher compared to stock Last edited by KAR; 10-19-2013 at 04:06 PM.

10-19-2013, 03:50 PM	#4
KAR Senior Member Join Date: Jul 2012 Drives: Whiteout 6spd Location: NJ Posts: 489 Thanks: 21 Thanked 163 Times in 100 Posts Mentioned: 17 Post(s) Tagged: 1 Thread(s)	now you can see where the flasher is. I use a small screw driver to unclip the flasher from its mount.. you stick it in to unclip its from it mount and push from behind towards the rear of the car. unplug the stock one and plug the tapturn flasher and your done Last edited by KAR; 10-19-2013 at 04:03 PM.

10-19-2013, 03:53 PM	#5
KAR Senior Member Join Date: Jul 2012 Drives: Whiteout 6spd Location: NJ Posts: 489 Thanks: 21 Thanked 163 Times in 100 Posts Mentioned: 17 Post(s) Tagged: 1 Thread(s)	end results, click on image to see the video keep in mind you can use this as regular Tapturn flasher and has the function as the regular flasher, you just need to swith it off, you can also flick a switch to where these function will only work with the car OFF Last edited by KAR; 10-19-2013 at 04:08 PM.

10-23-2013, 12:57 AM	#11
scottmcphee Senior Member Join Date: Nov 2012 Drives: 06 Subaru Legacy Location: Canada Posts: 291 Thanks: 40 Thanked 119 Times in 81 Posts Mentioned: 11 Post(s) Tagged: 1 Thread(s)	Done Thanks! __________________ TapTurn flasher learn more here.

11-15-2013, 02:22 AM	#12
ReThink Member Join Date: Jul 2013 Drives: Sc10n FRS "DCLXIV" Location: San Diego Posts: 98 Thanks: 28 Thanked 9 Times in 8 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Strobe option...I already have a Tapturn Flasher, but how do I get one of these with this strobe option? __________________ Sc10n FRS #0664

10-19-2013, 03:39 PM	#2
KAR Senior Member Join Date: Jul 2012 Drives: Whiteout 6spd Location: NJ Posts: 489 Thanks: 21 Thanked 163 Times in 100 Posts Mentioned: 17 Post(s) Tagged: 1 Thread(s)	for the Install, pretty straight forward you can reach under the steering wheel to install but Im showing you guys where it is located. first I pull off the side panel on the driverside

10-19-2013, 03:44 PM	#3
KAR Senior Member Join Date: Jul 2012 Drives: Whiteout 6spd Location: NJ Posts: 489 Thanks: 21 Thanked 163 Times in 100 Posts Mentioned: 17 Post(s) Tagged: 1 Thread(s)	there is A screw inside the panel and underneath the dash right below the ignition.. remove them and gently pull back the under panel

10-19-2013, 09:09 PM	#6
KAR Senior Member Join Date: Jul 2012 Drives: Whiteout 6spd Location: NJ Posts: 489 Thanks: 21 Thanked 163 Times in 100 Posts Mentioned: 17 Post(s) Tagged: 1 Thread(s)	Photobucket sucks, videos are slow..

10-20-2013, 10:05 AM	#7
Enraged21 #RememberTheBuster Join Date: Aug 2012 Drives: Firestorm FRS MT Location: Orlando, FL Posts: 597 Thanks: 637 Thanked 154 Times in 102 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	looks cool though

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TapTurn flasher - convenience signaling for LEDs or stock bulbs!	scottmcphee	Exterior Parts - Lighting	120	09-22-2017 01:45 PM
TapTurn - best signal flasher upgrade for FR-S BRZ	scottmcphee	Audio/Visual, Electronics, Infotainment, NAV	160	03-30-2015 11:15 PM
My New LED+TAPTURN=COOL	KAR	Cosmetic Modification (Interior/Exterior/Lighting)	0	10-09-2013 02:26 AM
FS: gently tested TapTurn flasher	scottmcphee	Exterior Parts (Aero, Lighting, Etc.)	7	09-02-2013 11:14 PM
Blue/Red Strobe Lights?	636	Cosmetic Modification (Interior/Exterior/Lighting)	15	11-04-2012 10:10 PM

User Name		Remember Me?
Password