PTUNING Turbo Kit Owners Topic - Page 78 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

sw20kosh · 01-17-2016, 04:34 AM

Quote:

Originally Posted by Mrc@ptuning

A twin scroll turbo will not work on our application unless someone can come up with a way to route two overpipes from the header back to the turbo through that tiny opening in the front subrame

ACE 421 header does it:

Surprisingly no rattles or issues so far after 4 track days and 5k miles of daily diving.

seito23 · 01-18-2016, 12:26 AM

Ptuning turbo kit with an Ace header . So much want.

Darryljr11 · 01-18-2016, 04:19 AM

Quote:

Originally Posted by Freddy@PTUNING

How about our new flex-fuel kit?

You'll see me soon for that along with a bigger turbine housing.

Mrc@ptuning · 01-18-2016, 10:29 AM

Quote:

Originally Posted by sw20kosh

ACE 421 header does it:

Well you'll need to figure out how to run about 10+" more of dual tubing beyond that merge to the two bolt flange and obviously that the dual secondary tubing cannot merge until it reaches the turbine housing. That's going to require a lot of spacing over the front subframe and in addition there's no way to do it without dropping the front subframe--assuming there's even enough space for dual secondary runners to route up and over the front subframe.

sw20kosh · 01-18-2016, 12:14 PM

Quote:

Originally Posted by Mrc@ptuning

Well you'll need to figure out how to run about 10+" more of dual tubing beyond that merge to the two bolt flange and obviously that the dual secondary tubing cannot merge until it reaches the turbine housing. That's going to require a lot of spacing over the front subframe and in addition there's no way to do it without dropping the front subframe--assuming there's even enough space for dual secondary runners to route up and over the front subframe.

The ace stays dual all the way up and over the subframe. Install did not require dropping subframe.

kbye · 01-18-2016, 12:40 PM

http://www.ft86club.com/forums/showthread.php?t=99861

Will be interesting to see how he can pull it off.

jcward10 · 01-18-2016, 09:14 PM

How much did it cost for Ptuning to do the install and tune for you ?

redninja77 · 02-03-2016, 12:36 AM

Hey guys! Just wanna share my my car and my Ptuning turbo kit from the Philippines. If I'm not wrong, I'm the first and only one with this kit over here.

Notable mods:
Tomei 80r exhaust
PTUNING Stainless Steel 4-1 EL Header
Ptuning Oil Cooler System
ACT XT Street Clutch Kit
StopTech 355x32 Front BBK

MooKz · 02-03-2016, 01:41 AM

Quote:

Originally Posted by redninja77

Hey guys! Just wanna share my my car and my Ptuning turbo kit from the Philippines. If I'm not wrong, I'm the first and only one with this kit over here.

Notable mods:
Tomei 80r exhaust
PTUNING Stainless Steel 4-1 EL Header
Ptuning Oil Cooler System
ACT XT Street Clutch Kit
StopTech 355x32 Front BBK

Have you been tuned yet? Any noticeable difference with the tomei 80r considering you go down to 2.5" exhaust adapter back to 3"? sound clips? looks awesome man!

redninja77 · 02-03-2016, 03:32 AM

Quote:

Originally Posted by MooKz

Have you been tuned yet? Any noticeable difference with the tomei 80r considering you go down to 2.5" exhaust adapter back to 3"? sound clips? looks awesome man!

Thanks man!

I didn't use the adapter from Ptuning. I had a 3" 2-bolt flange welded on to the turbo downpipe. I'll try to post pics of it as soon as I can.

Hope to have soundclips soon as well. Tomei 80r is a hate it/love it exhaust, I think. I love it but my wife hates the drone on the highway. Im thinking of having a resonator welded in. Give up a few hps to please the wife. hahah!

I had it dyno tuned over here. I just added a pic of the dyno results in my original post. I signed up for an etune with Ptuning. I wanna compare the two.

Steelscion · 03-15-2016, 03:51 PM

How many of you guys are running an oil cooler? I live in PA and getting ptuning kit installed next week. 3 hour drive without one an issue if it's a warm day?

Sent from my SM-G920V using Tapatalk

Freddy@PTUNING · 03-15-2016, 04:12 PM

Quote:

Originally Posted by Steelscion

How many of you guys are running an oil cooler? I live in PA and getting ptuning kit installed next week. 3 hour drive without one an issue if it's a warm day?

Sent from my SM-G920V using Tapatalk

That would depend on how you drive for those 3 hours.

mkivsoopra · 03-15-2016, 06:47 PM

Quote:

Originally Posted by Steelscion

How many of you guys are running an oil cooler? I live in PA and getting ptuning kit installed next week. 3 hour drive without one an issue if it's a warm day?

Sent from my SM-G920V using Tapatalk

I initially ran without an oil cooler for some time. Casual driving is fine. With spirited driving in the mountains, I'd easily hit 250°F+. Don't even think about tracking without one (I'm embarrassed to admit that I did....... 300°F+

).

kanundrum · 03-18-2016, 01:46 PM

Dropping off car for E85 Conversion tomorrow. Currently making 397whp and 305tq w/ Water Meth so lets see what Toan can cook up with E85.

02-03-2016, 12:36 AM	#1086
redninja77 Member Join Date: May 2014 Drives: 2012 Toyota 86 Location: United States Posts: 16 Thanks: 0 Thanked 7 Times in 2 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Hey guys! Just wanna share my my car and my Ptuning turbo kit from the Philippines. If I'm not wrong, I'm the first and only one with this kit over here. Notable mods: Tomei 80r exhaust PTUNING Stainless Steel 4-1 EL Header Ptuning Oil Cooler System ACT XT Street Clutch Kit StopTech 355x32 Front BBK Last edited by redninja77; 02-03-2016 at 03:26 AM. Reason: added new pic

03-18-2016, 01:46 PM	#1092
kanundrum Senior Member Join Date: Jan 2012 Drives: 2013 Whiteout FR-S Location: Laurel, MD Posts: 5,364 Thanks: 2,704 Thanked 3,016 Times in 1,711 Posts Mentioned: 106 Post(s) Tagged: 3 Thread(s)	Dropping off car for E85 Conversion tomorrow. Currently making 397whp and 305tq w/ Water Meth so lets see what Toan can cook up with E85. __________________ Ive spent most of my life racing... The rest I just wasted

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Innovate (Sprintex) Supercharger Owners Topic	DarrenDriven	Forced Induction	9139	12-29-2023 10:58 PM
AVO Turbo Kit Owners Topic	Sportsguy83	Forced Induction	1935	02-20-2023 10:46 AM
Full Blown Turbo Kit Owners Topic	King Tut	Forced Induction	2637	12-27-2020 03:44 PM
FA20Club Turbo Kit Owners Topic	pixel67	Forced Induction	1531	09-09-2014 12:36 PM
P&L Turbo Owners Topic Thread	GTB/ZR-1	Forced Induction	4	09-01-2013 06:27 PM

01-18-2016, 12:26 AM	#1080
seito23 Member Join Date: Nov 2015 Drives: Corn Juice junkie Location: Sunshine state Posts: 47 Thanks: 13 Thanked 29 Times in 14 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Ptuning turbo kit with an Ace header . So much want.

01-18-2016, 12:40 PM	#1084
kbye Senior Member Join Date: Feb 2013 Drives: 2014 FR-S Location: Calgary Posts: 460 Thanks: 64 Thanked 441 Times in 140 Posts Mentioned: 9 Post(s) Tagged: 2 Thread(s)	http://www.ft86club.com/forums/showthread.php?t=99861 Will be interesting to see how he can pull it off.

01-18-2016, 09:14 PM	#1085
jcward10 Junior Member Join Date: Jan 2016 Drives: Brz fan boy Location: Durham, NC Posts: 2 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 1 Thread(s)	How much did it cost for Ptuning to do the install and tune for you ?

03-15-2016, 03:51 PM	#1089
Steelscion Member Join Date: Sep 2015 Drives: 2013 scion frs Location: Lancaster PA Posts: 34 Thanks: 24 Thanked 5 Times in 4 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	How many of you guys are running an oil cooler? I live in PA and getting ptuning kit installed next week. 3 hour drive without one an issue if it's a warm day? Sent from my SM-G920V using Tapatalk

User Name		Remember Me?
Password