Coilover stud broke.. help - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Dee · 01-28-2018, 01:50 PM

Installed all three struts, of course got to the last one and the stud broke. Stud comes up maybe another inch so you can bolt down the top hat.

They are st coilovers. I’m going to see if warranty will cover. If it doesn’t, does anyone have any ideas?

It goes somewhat deep, i may be able to pull it out? Or maybe I can just take it to a machine shop and drill it out and put a new one in?

wparsons · 01-28-2018, 06:54 PM

I wouldn't mess around with that until you talk to ST first. I think they're gas pressurized shocks, but not sure if the shaft is hollow and pressurized or not.

Dee · 01-28-2018, 08:28 PM

Quote:

Originally Posted by wparsons

I wouldn't mess around with that until you talk to ST first. I think they're gas pressurized shocks, but not sure if the shaft is hollow and pressurized or not.

Yeah definitely holding off. Maybe I can just buy one rear strut from ST if warranty doesn’t come through?

Tcoat · 01-28-2018, 09:00 PM

Quote:

Originally Posted by Dee

Yeah definitely holding off. Maybe I can just buy one rear strut from ST if warranty doesn’t come through?

How did you manage to break it? They are tough studs.

S. Snake · 01-28-2018, 10:08 PM

Hulk smash! lmao dang man is there a torque value in the instructions? Might have cross threaded it during install or messed up one of the threads putting it through the chassis

Sent from my SM-G930V using Tapatalk

finch1750 · 01-29-2018, 02:46 AM

I don't have ST but had the same thing happen when my coils got installed. Broke with very little force surprisingly and mine looks thicker in diameter even. There was damage to the middle threads so it started going on fine then caught part way down so was moving kinda fast.

Definitely go through ST for how to proceed.

Dee · 01-29-2018, 06:41 PM

Quote:

Originally Posted by finch1750

I don't have ST but had the same thing happen when my coils got installed. Broke with very little force surprisingly and mine looks thicker in diameter even. There was damage to the middle threads so it started going on fine then caught part way down so was moving kinda fast.

Definitely go through ST for how to proceed.

ST says it is an install error and they rarely if at all cover warranty for the stud breaking (proper term piston rod). I have the option to repair for 230$ not including shipping back and forth.

finch1750 · 01-29-2018, 07:03 PM

Quote:

Originally Posted by Dee

ST says it is an install error and they rarely if at all cover warranty for the stud breaking (proper term piston rod). I have the option to repair for 230$ not including shipping back and forth.

Bummer. Im sure many of us have had our fair share of expensive mistakes

S. Snake · 01-29-2018, 08:12 PM

That sucks they won't just replace it, seems like if they cared about you owning their product they would cover it for an honest mistake, it's not like you did that to all 4 corners. And I take it these don't disassemble down to a replacement strut like my old parts shop max units did. Sorry about what happened to you.

Sent from my SM-G930V using Tapatalk

finch1750 · 01-29-2018, 11:41 PM

Quote:

Originally Posted by S. Snake

That sucks they won't just replace it, seems like if they cared about you owning their product they would cover it for an honest mistake, it's not like you did that to all 4 corners. And I take it these don't disassemble down to a replacement strut like my old parts shop max units did. Sorry about what happened to you.

Sent from my SM-G930V using Tapatalk

I got lucky with mine. They are custom built from a local shop that I have a good relationship with so they replaced it for me without hassle. But business is business when you get to the corporate level sometimes.

Dee · 01-29-2018, 11:51 PM

Quote:

Originally Posted by S. Snake

That sucks they won't just replace it, seems like if they cared about you owning their product they would cover it for an honest mistake, it's not like you did that to all 4 corners. And I take it these don't disassemble down to a replacement strut like my old parts shop max units did. Sorry about what happened to you.

Sent from my SM-G930V using Tapatalk

I know right? They quoted me 90$ for materials and 135$ for labor.. i was hoping for maybe a 100$.

Brink · 01-30-2018, 01:04 AM

Quote:

Originally Posted by S. Snake

That sucks they won't just replace it, seems like if they cared about you owning their product they would cover it for an honest mistake, it's not like you did that to all 4 corners. And I take it these don't disassemble down to a replacement strut like my old parts shop max units did. Sorry about what happened to you.

Sent from my SM-G930V using Tapatalk

At that price for a repair they may as well just replace it.

01-28-2018, 01:50 PM	#1
Dee Member Join Date: Dec 2016 Drives: 2014 Asphalt FRS Location: Tennessee Posts: 53 Thanks: 8 Thanked 7 Times in 7 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Coilover stud broke.. help Installed all three struts, of course got to the last one and the stud broke. Stud comes up maybe another inch so you can bolt down the top hat. They are st coilovers. I’m going to see if warranty will cover. If it doesn’t, does anyone have any ideas? It goes somewhat deep, i may be able to pull it out? Or maybe I can just take it to a machine shop and drill it out and put a new one in?

01-28-2018, 10:08 PM	#5
S. Snake Member Join Date: Jan 2018 Drives: 13' Asphalt Location: Antelope Valley, CA Posts: 94 Thanks: 34 Thanked 51 Times in 32 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Hulk smash! lmao dang man is there a torque value in the instructions? Might have cross threaded it during install or messed up one of the threads putting it through the chassis Sent from my SM-G930V using Tapatalk __________________ "always forward" >>>>>>>>>>>

01-29-2018, 02:46 AM	#6
finch1750 Undisputed El Presidente Join Date: Jun 2012 Drives: Zenki 37J ZN6 Location: Stockton, CA Posts: 11,534 Thanks: 9,359 Thanked 9,375 Times in 5,245 Posts Mentioned: 374 Post(s) Tagged: 33 Thread(s)	I don't have ST but had the same thing happen when my coils got installed. Broke with very little force surprisingly and mine looks thicker in diameter even. There was damage to the middle threads so it started going on fine then caught part way down so was moving kinda fast. Definitely go through ST for how to proceed. __________________ "Just like how a strut bar somehow enables you to corner 20MPH faster around a cloverleaf on-ramp, when the reality is, you can do it already but you just don't have to balls to do it." - CSG David

01-29-2018, 08:12 PM	#9
S. Snake Member Join Date: Jan 2018 Drives: 13' Asphalt Location: Antelope Valley, CA Posts: 94 Thanks: 34 Thanked 51 Times in 32 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	That sucks they won't just replace it, seems like if they cared about you owning their product they would cover it for an honest mistake, it's not like you did that to all 4 corners. And I take it these don't disassemble down to a replacement strut like my old parts shop max units did. Sorry about what happened to you. Sent from my SM-G930V using Tapatalk __________________ "always forward" >>>>>>>>>>>

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Key Fob broke down	RichardsFRS	Scion FR-S / Toyota 86 GT86 General Forum	10	12-29-2015 04:38 PM
Overpipe stud broke!	edeekeos	Engine, Exhaust, Transmission	10	08-19-2014 08:57 PM
This is why I'm broke	cdrazic93	Off-Topic Lounge [WARNING: NO POLITICS]	14	07-26-2014 03:15 PM
I think I broke the tie rod.......	jshum	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	26	06-04-2014 12:41 AM
Oh-Oh's, I Think I Broke It!	track_warrior	Issues \| Warranty \| Recalls / TSB	232	06-12-2013 10:58 PM

User Name		Remember Me?
Password