FR-S 10 Series Registry

[dnieves]

Originally Posted by twag4

I don't have any paperwork yet. The dealership is pretty frustrated too. They checked the wires going into the panel itself, and had voltage going to it. Toyota, however, is making them replace the control module first. Then if that doesn't work they are making the dealer replace the wiring harness. Then, only after they've done both those things will they let them replace the $1100 panel. This will be a weeks or months long process.

$1,100?!? So much for the detractors' cheap gimmick comments!

[Chaetagnath]

Originally Posted by F3RGY68

Another note, anyone willing to look behind their radio unit? I pulled mine out and noticed there is a plug ziptied behind the radio, close to the panel, near a ground. It doesn't look like it would plug into any remaining ports on the head unit, any photos of which goes where; or do other people have this not plugged in?

I've got a standard 2013 FRS and that connector is present, also not plugged into anything. No idea what it is for.

[F3RGY68]

Originally Posted by Chaetagnath

I've got a standard 2013 FRS and that connector is present, also not plugged into anything. No idea what it is for.

At least that eliminates it from being el dash related, thank you.

[Trifid]

Originally Posted by dnieves

Doesn't it have it's own fuse? Do the external badges work?


I wonder if there are part numbers for the EL panel and light up badges?


P.S. funny, when I think disposable cars makers I think Mitsubishi, Hyundai and especially KIA.

I've checked all the fuses (including the ones behind the radio) and they're fine. The only thing I haven't wiggled and messed with is the controller itself, which necessitates removing the shifter boot and console, which I don't have time or inclination to do. But, just like everyone else, I think it's a cheesy feature, but I paid for it to be there and it should work. There was a piece of paper stuck in the back of the owner's manual that has a wiring diagram for this panel. It has the part number for the controller. I may order one, and one boring day replace it myself, since the dealer has proven to be totally ignorant and useless. If that works, I'll let you know. Maybe I could get a quantity discount on the things, and divvy them out here... there certainly seems to be a market for them!

[F3RGY68]

Originally Posted by Trifid

It has the part number for the controller. I may order one, and one boring day replace it myself, since the dealer has proven to be totally ignorant and useless. If that works, I'll let you know. Maybe I could get a quantity discount on the things, and divvy them out here... there certainly seems to be a market for them!

My controller wasn't taped down as intended, and it was connected. Disconnected/reconnected to check, still no go. It really seems like the only possible issue. Only other thing I can't find out is someone mentioned a procedure to sync the el dash to come on with the door, but the emblems and interior light do work as they should. I'm interested in a possible group buy, otherwise please keep us posted on the dealer.

[vincentceezy]

http://tinypic.com/r/2z5kei0/8

#1290 Oakland/Irvine CA

Got it in MAR 2014. So far my mods are a Greddy CAI, DC headers EL, DC overpipe, SRS exhaust,lowered on TRD springs & stock shocks, TRD quick shifter, MTEC clutch spring and shift spring, Stock rims wrapped in Falken FK-453 tires (225/45/17) all around, Beatsonic shark fin, and back up camera.

Mine did come with the fog lights. Manual. Got most of my work done at AVN motorsports in Alameda,CA and Autotuned in LA.

[torqdork]

Originally Posted by vincentceezy

Got it in MAR 2013. So far my mods are a Greddy CAI, DC headers EL, DC overpipe, SRS exhaust,lowered on TRD springs & stock shocks, TRD quick shifter, MTEC clutch spring and shift spring, Stock rims wrapped in Falken FK-453 tires (225/45/17) all around, Beatsonic shark fin, and back up camera.

Mine did come with the fog lights. Manual. Got most of my work done at AVN motorsports in Alameda,CA and Autotuned in LA.

Nice selection of mods, all go while keeping stock appearance.

Yours must have been one of the first sold or you work at TMS and pulled strings? I didn't think they were released until June but maybe some got out with the first Monroney label that created an administrative stop sale for almost eight weeks until they printed corrected labels for cars stuck at the POE's.

[vincentceezy]

Originally Posted by torqdork

Nice selection of mods, all go while keeping stock appearance.

Yours must have been one of the first sold or you work at TMS and pulled strings? I didn't think they were released until June but maybe some got out with the first Monroney label that created an administrative stop sale for almost eight weeks until they printed corrected labels for cars stuck at the POE's.

Thanks! That what I was going for. That stock look but have the performance to go with it. I'm sorry, that was a typo. Thanks for pointing that out. It was March 2014..

[Deb10]

#2268 is for sale, like new, and everything works like it's supposed to :

http://www.ft86club.com/forums/showp...postcount=2293

[dnieves]

Originally Posted by Deb10

#2268 is for sale, like new, and everything works like it's supposed to :

http://www.ft86club.com/forums/showp...postcount=2293

Sorry to hear you're unloading it -the car can't seem to find a permanent home (for a car that's less than two years old it's going on its third owner).


Any bites yet?

[Shourewaters]

Howdy strangers! I got my 10 series a little less than a month ago. #2461. As a former owner of 4 ae86s, I must say this car really brings out what the ae86 was all about.

[Datcrazyeric]

#1546 was just sold!

[torqdork]

Originally Posted by Datcrazyeric

#1546 was just sold!

You sold your 2013 10 Series for a 2014 listed in your Details?

[torqdork]

Originally Posted by Shourewaters

Howdy strangers! I got my 10 series a little less than a month ago. #2461. As a former owner of 4 ae86s, I must say this car really brings out what the ae86 was all about.

Congrats! They nailed it, didn't they?