Edelbrock E-force Owner's thread and FAQs (Frequently Asked Questions) - Page 302 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Dadhawk · 08-20-2021, 07:46 AM

Quote:

Originally Posted by dpfarr

I bought my kit used and dude fucked up and included stock tb coolant lines. I’ve been searching around on the edelbrock site and there doesn’t seem a clear option to buy new lines.

Anyone ever have to do this or have luck with similar unlucky circumstances?

Have you tried calling Edelbrock directly to see if they will sell you the parts? I'm relatively confident they keep spare parts around....

dpfarr · 08-20-2021, 01:57 PM

Quote:

Originally Posted by Dadhawk

Have you tried calling Edelbrock directly to see if they will sell you the parts? I'm relatively confident they keep spare parts around....

1 hour into being on hold...

BrahmaBull1990 · 08-23-2021, 11:49 AM

I may get flamed for this, but I do not really like the UEL header sound. The engine sounds like it's burping and like a P51 Mustang. The racer noise (Honda) of the EL header is more appealing to me, personally. I currently have a Tomei UEL header (catless - if they even sell a catted one), which I will be selling.

1:Which EL would be best to pair with the Edelbrock; Ptuning, JDL, or Tomei?

2: I just got off the phone with my tuner and he said headers are odd and I may or may not need a retune going from UEL to EL. What do you all suggest? I am leaning towards just getting it retuned. @CSG Mike Do you have any good EL headers? I see JDL on your site, but the price is $0..so maybe an inventory thing.

Chris3007 · 08-23-2021, 01:54 PM

Quote:

Originally Posted by dpfarr

1 hour into being on hold...

Edelbrock typically sends you to https://superchargersonline.com/ for replacement parts. I have oredered through them a few times and they have been very helpful/

Q8D · 08-23-2021, 06:29 PM

Jegs carries most if not all the replacement parts (based on the Edelbrock Part Numbers in their instructions). You can also contact Summit Racing. They should be able to provide you with replacement parts since they carry everything Edelbrock.

CSG Mike · 08-24-2021, 02:00 AM

Quote:

Originally Posted by BrahmaBull1990

I may get flamed for this, but I do not really like the UEL header sound. The engine sounds like it's burping and like a P51 Mustang. The racer noise (Honda) of the EL header is more appealing to me, personally. I currently have a Tomei UEL header (catless - if they even sell a catted one), which I will be selling.

1:Which EL would be best to pair with the Edelbrock; Ptuning, JDL, or Tomei?

2: I just got off the phone with my tuner and he said headers are odd and I may or may not need a retune going from UEL to EL. What do you all suggest? I am leaning towards just getting it retuned. @CSG Mike Do you have any good EL headers? I see JDL on your site, but the price is $0..so maybe an inventory thing.

JDL or Ace.

Available by request only. PM to order.

brandonblt2 · 08-24-2021, 10:22 AM

Anyone else tuned with Delicious that has catless headers? Is it normal to have the CEL blink a few times after a reset? I believe the tune is suppressing the P0172 - System too Rich Bank 1. I continuously have this code pop up no matter what after the car warms up. I replaced my fuel pump thinking it was related to that but now I'm leaning towards O2 sensor, possible gasket leak near the headers, or the tune itself.

Pgh_Area · 08-24-2021, 10:31 AM

Quote:

Originally Posted by brandonblt2

Anyone else tuned with Delicious that has catless headers? Is it normal to have the CEL blink a few times after a reset? I believe the tune is suppressing the P0172 - System too Rich Bank 1. I continuously have this code pop up no matter what after the car warms up. I replaced my fuel pump thinking it was related to that but now I'm leaning towards O2 sensor, possible gasket leak near the headers, or the tune itself.

How's your injectors? Any chance the ones in bank one are sticking?

BrahmaBull1990 · 08-24-2021, 10:48 AM

Quote:

Originally Posted by brandonblt2

Anyone else tuned with Delicious that has catless headers? Is it normal to have the CEL blink a few times after a reset? I believe the tune is suppressing the P0172 - System too Rich Bank 1. I continuously have this code pop up no matter what after the car warms up. I replaced my fuel pump thinking it was related to that but now I'm leaning towards O2 sensor, possible gasket leak near the headers, or the tune itself.

I had two consistent CEL with DT on a car with 5k miles. P0507 -idle air RPM higher than expected and P105A - 02 Sensor Delayed Response Rich to Lean Bank 1 Sensor 1

After two revisions, they never went away for more than a week. I was told some care are just finicky?

When I had my Edelbrock installed, I had them tune it in-person with the Dynapack and I have not had a CEL since.

B T · 08-24-2021, 12:11 PM

Catless here, no CEL. It could be the O2 sensor, but I don't think it would say it was rich if it was a leak after leaving the head. It's putting in more fuel than is required for the air reaching the cylinder. Are you sure the supercharger has a good seal on the heads?

brandonblt2 · 08-24-2021, 12:21 PM

Quote:

Originally Posted by Pgh_Area

How's your injectors? Any chance the ones in bank one are sticking?

I replaced the injectors about 10k miles ago so they should be good. I also put a bottle of injector cleaner in my gas tank. I'll pop them off and do a visual check and bench clean this weekend tho.

brandonblt2 · 08-24-2021, 12:38 PM

Quote:

Originally Posted by B T

Catless here, no CEL. It could be the O2 sensor, but I don't think it would say it was rich if it was a leak after leaving the head. It's putting in more fuel than is required for the air reaching the cylinder. Are you sure the supercharger has a good seal on the heads?

Hmm, I did the install myself so I'm pretty sure gasket was in place when I bolted the Supercharger down. I also hose clamped every vacuum line just to make sure I have no leaks.

Quote:

Originally Posted by BrahmaBull1990

I had two consistent CEL with DT on a car with 5k miles. P0507 -idle air RPM higher than expected and P105A - 02 Sensor Delayed Response Rich to Lean Bank 1 Sensor 1

After two revisions, they never went away for more than a week. I was told some care are just finicky?

When I had my Edelbrock installed, I had them tune it in-person with the Dynapack and I have not had a CEL since.

This is why I'm not sure if its the tune or not. I was stage 2 for the longest time on OFT without any issues without the CEL popping up. But then again DT Tune ran fine after I replaced OEM injectors until recently.

Anyone know how to test if an O2 sensor is going? I'm at 175k miles most of those catless so I wouldn't be surprised if the sensor is starting to go. Power loss and seems pretty intermittent.

CSG Mike · 08-24-2021, 01:46 PM

Quote:

Originally Posted by brandonblt2

Hmm, I did the install myself so I'm pretty sure gasket was in place when I bolted the Supercharger down. I also hose clamped every vacuum line just to make sure I have no leaks.

This is why I'm not sure if its the tune or not. I was stage 2 for the longest time on OFT without any issues without the CEL popping up. But then again DT Tune ran fine after I replaced OEM injectors until recently.

Anyone know how to test if an O2 sensor is going? I'm at 175k miles most of those catless so I wouldn't be surprised if the sensor is starting to go. Power loss and seems pretty intermittent.

You tuner can make an educated guess base don logs, but at 175k, it's definitely time to replace it.

BrahmaBull1990 · 08-24-2021, 01:56 PM

Quote:

Originally Posted by brandonblt2

Anyone know how to test if an O2 sensor is going? I'm at 175k miles most of those catless so I wouldn't be surprised if the sensor is starting to go. Power loss and seems pretty intermittent.

Wow! 175k; how many boosted miles?

08-23-2021, 11:49 AM	#4217
BrahmaBull1990 Howdy Join Date: Feb 2021 Drives: 2020 BRZ PP Location: Snohomish, WA Posts: 589 Thanks: 1,271 Thanked 446 Times in 248 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	I may get flamed for this, but I do not really like the UEL header sound. The engine sounds like it's burping and like a P51 Mustang. The racer noise (Honda) of the EL header is more appealing to me, personally. I currently have a Tomei UEL header (catless - if they even sell a catted one), which I will be selling. 1:Which EL would be best to pair with the Edelbrock; Ptuning, JDL, or Tomei? 2: I just got off the phone with my tuner and he said headers are odd and I may or may not need a retune going from UEL to EL. What do you all suggest? I am leaning towards just getting it retuned. @CSG Mike Do you have any good EL headers? I see JDL on your site, but the price is $0..so maybe an inventory thing. __________________ There's a point at 7,000 RPM... where everything fades. The machine becomes weightless. Just disappears. And all that's left is a body moving through space and time. 7,000 RPM. That's where you meet it. You feel it coming. It creeps up on you, close in your ear. Asks you a question. The only question that matters. Who are you? Last edited by BrahmaBull1990; 08-23-2021 at 12:09 PM.

08-24-2021, 10:22 AM	#4221
brandonblt2 The Stig's African Cousin Join Date: Apr 2014 Drives: 2014 wrb brz Location: NJ Posts: 719 Thanks: 1,546 Thanked 485 Times in 255 Posts Mentioned: 4 Post(s) Tagged: 1 Thread(s)	Anyone else tuned with Delicious that has catless headers? Is it normal to have the CEL blink a few times after a reset? I believe the tune is suppressing the P0172 - System too Rich Bank 1. I continuously have this code pop up no matter what after the car warms up. I replaced my fuel pump thinking it was related to that but now I'm leaning towards O2 sensor, possible gasket leak near the headers, or the tune itself. __________________ Instagram: brandonblt2 Build Thread: http://www.ft86club.com/forums/showt...86#post2219386 Flickr: brandonblt567

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Vortech Owner Thread & Setup Questions	reyruiz191	Forced Induction	340	05-17-2022 12:44 PM
Edelbrock E-Force Supercharger	itsibarra	Forced Induction	938	07-31-2021 04:48 PM
Most annoyingly over-asked questions on FT86 forums	mit_peid	Off-Topic Lounge [WARNING: NO POLITICS]	36	01-16-2014 02:48 PM
Brz Info/Specs (helpful info for questions asked often)	Gaen	BRZ First-Gen (2012+) -- General Topics	0	05-24-2012 10:09 PM

08-23-2021, 06:29 PM	#4219
Q8D Member Join Date: Aug 2021 Drives: N/A Location: Kuwait Posts: 33 Thanks: 11 Thanked 14 Times in 9 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Jegs carries most if not all the replacement parts (based on the Edelbrock Part Numbers in their instructions). You can also contact Summit Racing. They should be able to provide you with replacement parts since they carry everything Edelbrock.

08-24-2021, 12:11 PM	#4224
B T Senior Member Join Date: May 2015 Drives: 15 BRZ, 2003 MR2, '70 Elky, 06 TBSS Location: Mobile, Alabama Posts: 516 Thanks: 202 Thanked 203 Times in 142 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	Catless here, no CEL. It could be the O2 sensor, but I don't think it would say it was rich if it was a leak after leaving the head. It's putting in more fuel than is required for the air reaching the cylinder. Are you sure the supercharger has a good seal on the heads?

User Name		Remember Me?
Password