Full throttle Electric Supercharger Build Thread - Page 770 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

CY86 · 02-03-2020, 07:15 AM

Hey all. Regarding batteries, I was doing some research for another project and while looking for battery solutions, I discovered that you can get batteries from the Nissan eleaf for a few hundred bucks (used) 3.5 kw storage, 24 volts etc. You guys think this would be a good fit for an echarger?

Urmyson · 02-04-2020, 12:35 PM

Which version OFT is everyone running? I'm running the original 2.0 tune I believe from 2014 and saw there is a 4.0 tune now. Any benefit in trying to upgrade to 4.0?

Urmyson · 02-17-2020, 09:05 PM

Does anyone know where I could get the volt meter/on off switch? I've been searching and haven't been able to find one. Mine died today, but it appears it's just the display.

Mufasa · 02-18-2020, 03:20 PM

Quote:

Originally Posted by DAEMANO

If you're talking about the license plate frame, then yes, the one I'm making can absolutely be BRZ. The emblem can go in either the bottom or top. You choose.

If you're talking about a console plaque, Yospeed makes one for the BRZ heated seats as well that can be customized, but like I mentioned, I'm not sure if he's going to be doing custom orders again soon. Example...

Since YoSpeed and MTEC are no longer producing these, is there another manufacturer/vendor that is producing them?

DAEMANO · 02-18-2020, 04:35 PM

Quote:

Originally Posted by Mufasa

Since YoSpeed and MTEC are no longer producing these, is there another manufacturer/vendor that is producing them?

Not as far as I've heard, although you can find boilerplate/ready-made ones on various sites on the net from Aliexpress, Amazon, and Ebay.

Mufasa · 02-18-2020, 06:24 PM

Quote:

Originally Posted by DAEMANO

Not as far as I've heard, although you can find boilerplate/ready-made ones on various sites on the net from Aliexpress, Amazon, and Ebay.

Bummer. This is the only one I like. The other ones don't flush out/don't have the texture or color that I'm looking for. Let me know when you're done with yours.

Gums · 02-18-2020, 08:10 PM

Quote:

Originally Posted by Urmyson

Does anyone know where I could get the volt meter/on off switch? I've been searching and haven't been able to find one. Mine died today, but it appears it's just the display.

There are a few volt meters on Amazon https://www.amazon.com/dp/B07WDPR22C...xpY2s9dHJ1ZQ==

Urmyson · 02-18-2020, 10:46 PM

Quote:

Originally Posted by Gums

There are a few volt meters on Amazon https://www.amazon.com/dp/B07WDPR22C...xpY2s9dHJ1ZQ==

I saw those but was hoping to find one with an on/off switch like the kit came with. I figured one would have popped right up somewhere online but nothing matching the one in the kit so far.

tzbang · 02-18-2020, 11:06 PM

I have a kit for sale if anyone is interested. I had professional cabling made for RHD so would be ideal for anyone in UK, Australia or NZ. (Comes with original LHD cables)

I also have a Procede Controller and OFT.

https://www.ft86club.com/forums/showthread.php?t=139009

86TOYO2k17 · 02-19-2020, 12:57 AM

Quote:

Originally Posted by tzbang

I have a kit for sale if anyone is interested. I had professional cabling made for RHD so would be ideal for anyone in UK, Australia or NZ. (Comes with original LHD cables)

I also have a Procede Controller and OFT.

https://www.ft86club.com/forums/showthread.php?t=139009

Or you could be an innovator and twin charge it with the sprintex and phantom. Just need to run a Y merged coupler pre MAF so at high rpm its not a restriction. Would be crazy low end torque.

BlOody_BoOger · 03-01-2020, 10:25 PM

Quote:

Originally Posted by 86TOYO2k17

Or you could be an innovator and twin charge it with the sprintex and phantom. Just need to run a Y merged coupler pre MAF so at high rpm its not a restriction. Would be crazy low end torque.

I actually just bought his unit and am planning on running twin phantoms!

Sent from my GM1915 using Tapatalk

BlOody_BoOger · 03-01-2020, 10:27 PM

Since I plan on running twin phantoms I want to go back to having a full size batter in the car rather than the Odyssey. But the smaller batteries won't since I'll have to run four batteries. My plan is to have them in the trunk and run wire to the front. My question is. Would it be safe for me to use jumper cables wires?

Sent from my GM1915 using Tapatalk

Sojhinn · 03-01-2020, 10:39 PM

Quote:

Originally Posted by BlOody_BoOger

Since I plan on running twin phantoms I want to go back to having a full size batter in the car rather than the Odyssey. But the smaller batteries won't since I'll have to run four batteries. My plan is to have them in the trunk and run wire to the front. My question is. Would it be safe for me to use jumper cables wires?

Sent from my GM1915 using Tapatalk

Run the full size in the back and the smaller batteries up front.

Sent from my iPhone using Tapatalk

86TOYO2k17 · 03-01-2020, 11:13 PM

Quote:

Originally Posted by BlOody_BoOger

Since I plan on running twin phantoms I want to go back to having a full size batter in the car rather than the Odyssey. But the smaller batteries won't since I'll have to run four batteries. My plan is to have them in the trunk and run wire to the front. My question is. Would it be safe for me to use jumper cables wires?

Sent from my GM1915 using Tapatalk

Why not do it right with the proper wire/cable? Technically jumper cables would work but probably not ideal and may not be safe.

EWCS 1/0 Gauge Premium Extra Flexible Welding Cable 600 Volt Combo Pack - Black+Red 15 Feet of Each - Made in the USA

Something like that should work.

02-04-2020, 12:35 PM	#10768
Urmyson Senior Member Join Date: Aug 2013 Drives: BRZ Location: FL Posts: 191 Thanks: 12 Thanked 45 Times in 28 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	OFT Tune Which version OFT is everyone running? I'm running the original 2.0 tune I believe from 2014 and saw there is a 4.0 tune now. Any benefit in trying to upgrade to 4.0?

02-17-2020, 09:05 PM	#10769
Urmyson Senior Member Join Date: Aug 2013 Drives: BRZ Location: FL Posts: 191 Thanks: 12 Thanked 45 Times in 28 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	Volt Meter Does anyone know where I could get the volt meter/on off switch? I've been searching and haven't been able to find one. Mine died today, but it appears it's just the display.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Circuit Motorsports - Vortech Supercharger FR-S Build + Full Perrin Exhaust & Extras	Circuit Motorsports	Member's Car Journals	4	03-21-2013 04:45 PM
Subaru BRZ : Full Throttle, powerslide, hard revving & ride	ESBjiujitsu	BRZ Photos, Videos, Wallpapers, Gallery Forum	20	05-30-2012 06:43 PM
86 Full Throttle Video + another.	Aus86	FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum	2	04-02-2012 07:07 AM

02-03-2020, 07:15 AM	#10767
CY86 Member Join Date: Oct 2018 Drives: they all have 4 wheels Location: Cyprus Posts: 38 Thanks: 33 Thanked 5 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Hey all. Regarding batteries, I was doing some research for another project and while looking for battery solutions, I discovered that you can get batteries from the Nissan eleaf for a few hundred bucks (used) 3.5 kw storage, 24 volts etc. You guys think this would be a good fit for an echarger?

02-18-2020, 11:06 PM	#10775
tzbang Senior Member Join Date: Oct 2014 Drives: 2013 GT86 Location: New Zealand Posts: 109 Thanks: 3 Thanked 8 Times in 7 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	I have a kit for sale if anyone is interested. I had professional cabling made for RHD so would be ideal for anyone in UK, Australia or NZ. (Comes with original LHD cables) I also have a Procede Controller and OFT. https://www.ft86club.com/forums/showthread.php?t=139009

03-01-2020, 10:27 PM	#10778
BlOody_BoOger Senior Member Join Date: May 2017 Drives: Hot lava FRS Monogram Charizard Location: Sacramento Ca Posts: 329 Thanks: 22 Thanked 85 Times in 63 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	Since I plan on running twin phantoms I want to go back to having a full size batter in the car rather than the Odyssey. But the smaller batteries won't since I'll have to run four batteries. My plan is to have them in the trunk and run wire to the front. My question is. Would it be safe for me to use jumper cables wires? Sent from my GM1915 using Tapatalk

User Name		Remember Me?
Password