Diode Dynamics Tail-as-Turn™: Make your LED tail a turn signal & add backup LEDs!

[Diode Dynamics]

FR-S / BRZ Tail as Turn +Backup Module

[ame="https://www.youtube.com/watch?v=kuZz7Kih0Ck"]Tail as Turn +Backup LED Module for Scion FR-S, Subaru BRZ - YouTube[/ame]

Just released! The new Tail as Turn™ Module PLUS Backup, for the Scion (Toyota) FR-S or Subaru BRZ! This is a unique mod that was 100% designed by Diode Dynamics in-house, and is manufactured by us right here in St. Louis, Missouri. Made in USA!

The Tail as Turn™ modules will make your nice LED tail light flash as the turn signal as well. With a ring of LEDs flashing instead of an incandescent bulb, you'll have a unique, modern look!

Then, since your old turn signals are no longer used, you can easily turn them into functional backup lights! The factory backup lights don't shine very well since they're right next to the ground, but by adding some up in your tail light, you'll drastically increase your visibility.

With the OEM tail light connectors, installation will literally take about 60 seconds, and does not require any wiring at all. I don't think you'll ever find an easier electrical mod! This kit will work with factory or aftermarket tail lights.

The base kit is just $40, which includes a pair of modules with OEM connectors, to convert your LED tail light into the turn signal, with extremely easy installation.

All kits also come with the extra wire and connector to add backup lights where your old turn signals were, but you do need to run LED bulbs, since you're drawing on the factory backup light circuit. At Diode Dynamics, we also offer the highest-quality LED bulbs on the market, backed by a 3-year warranty. For the complete Diode setup, you can add a pair of LEDs to your order, or use any 7440-size white LED.

Your order includes:
(2) Tail as Turn Modules with OEM Plug-and-play Connectors & built-in resistors
(1) Power wire to add backup lights
(1) CF18 turn signal flasher (optional)
(2) Diode Dynamics LED Bulbs (optional, needed to add backup lights)

Post up when you've made your order! Preorder promotion ends October 24th.

PREORDERS:
1. Andrew025
2. RC51rydr
3. Mechixx
4. Alain
5. captain_jack
6. johnb831
7. hahaman86
8. Ornelas66
9. Tea86
10. buddy32
11. Struckbylitenin
12. kykiee
13. NIN69
14. SkAsphalt
15. The Slow One
16. *LongFella
17. zeal86
18. Rico415
19. mush
20. arvidj
21. Khánh
22. Shneegle
23. Waffleicious
24. NLSP
25. PhreshhWun
26. wrb
27. 1Cor10:23
28. DragonMugen
29. wowy
30.

CLICK TO VIEW AND ORDER: Scion FR-S / Subaru BRZ Tail as Turn +Backup Module






XP80 High-Mount Backup LEDs, HP36 Lower Backup LEDs, and SMD2 License Plate LEDs

Scion FR-S / Subaru BRZ Tail as Turn +Backup Module

Remember: at Diode Dynamics, we're here if you need us for support and service, with our award-winning service team. We have been in business for over 8 years. We feature an industry-leading 3-year limited warranty. Something wrong? We ship you the new item with a return label. No waiting around!

Questions? Please feel free to post, PM, call, or email contact@diodedynamics.com

*PM us for the free-shipping code* (U.S. forum members only)

We are an American company, located in St. Louis, Missouri. We are open 9-5 Monday-Friday CST. Give us a call!

Nick C.
Diode Dynamics
(314) 205-3033

Originally Posted by DC2R

Hmmm torn on whether to go with this mod or not. Won't be replacing tails for a little while but will be shit out of luck when i do. Must make up mind. How long with this deal be going on for? @Diode Dynamics

Sent from my SM-N900T using Tapatalk

We'll offer the preorder promotion til Oct. 24th, which is the latest we expect to start shipping.


--------------------------------------------------

UPDATE TO PRICE AND PREORDER DEAL, OCTOBER 6TH:

We've seen a great response with this product, we we have doubled down on our investment. We'll be making more in our initial production run, and we have purchased some pretty awesome new manufacturing equipment!

Thanks to these improvements, we are lowering the price- The standard price for this mod will now be $30, a full $10 lower than we originally expected. We cannot offer a discount on top of that, but the TAILTURN preorder code will now get you free shipping with your order. Those that have already ordered, we will be refunding your shipping charge if you paid through Paypal, or your credit card transaction will be $5 lower when it goes on your statement.

We'll be sending an email out tonight to all those who have purchased as well. Sorry for the confusion, but we decided this was the best thing to do. When we found out we could lower the price, thanks to the new equipment, we decided to bring the price down for our customers, rather than pocket the extra money. We want as many people as possible to be able to afford our products.

Thanks!
Paul

[Alain]

Interested!!

[Andrew025]

Order placed.

[DC2R]

I think I'm in. Cost of 7440 hurts a little. What is the difference between 7440 and 7443? In video you say you use xp80 7443?

[FRSGT86]

Waiting for the video before committing to buy.

[Diode Dynamics]

Originally Posted by DC2R

I think I'm in. Cost of 7440 hurts a little. What is the difference between 7440 and 7443? In video you say you use xp80 7443?

7440 is single-filament, 7443 is dual. Either will work just fine since it's a single-filament socket.

You can use any LEDs, doesn't have to be ours. You can always get just the module now and upgrade your tail lights, then get backup LEDs later. Every kit includes the wiring you need to install the extra backups. You just don't want to use regular bulbs because you'll draw too much power on the backup light circuit. Thanks!

@FRSGT86 video is up.

Originally Posted by Andrew025

Order placed.

Number one slot, nice! Thanks for the order.

[DC2R]

Originally Posted by Diode Dynamics

7440 is single-filament, 7443 is dual. Either will work just fine since it's a single-filament socket.

You can use any LEDs, doesn't have to be ours. You can always get just the module now and upgrade your tail lights, then get backup LEDs later. Every kit includes the wiring you need to install the extra backups. You just don't want to use regular bulbs because you'll draw too much power on the backup light circuit. Thanks!

@FRSGT86 video is up.



Number one slot, nice! Thanks for the order.

Any idea how much wattage we can draw from that circuit? I am currently using HID power house max reverse lights and some auxiliary 5 watts LEDs.

[Diode Dynamics]

Originally Posted by DC2R

Any idea how much wattage we can draw from that circuit? I am currently using HID power house max reverse lights and some auxiliary 5 watts LEDs.

You wouldn't want to exceed factory draw by much, and that is 36 watts for the pair of stock backup bulbs.

Standard 7443 bulbs by themselves will draw 50 watts, 40% more than the circuit was designed to handle. So even if you have LEDs in the lower backups, it won't be safe to run standard 7440s as backups. It's your vehicle, but that's just my recommendation. You may not a blow fuse, and it may work fine, but it's just not a good way to do things. We strongly recommend only using LEDs in the new backup lights to avoid any issue.

[DC2R]

Originally Posted by Diode Dynamics

You wouldn't want to exceed factory draw by much, and that is 36 watts for the pair of stock backup bulbs.

Standard 7443 bulbs by themselves will draw 50 watts, 40% more than the circuit was designed to handle. So even if you have LEDs in the lower backups, it won't be safe to run standard 7440s as backups. It's your vehicle, but that's just my recommendation. You may not a blow fuse, and it may work fine, but it's just not a good way to do things. We strongly recommend only using LEDs in the new backup lights to avoid any issue.

Yeah I have these in stock backup housing:
http://hidpowerhouse.com/shop/hybrid...sbrztoyota-86/
And these in tag bolts:
http://www.banggood.com/Wholesale-Pa...t-p-48922.html
Will definitely use LED and most likely yours.

Sent from my SM-N900T using Tapatalk

[Diode Dynamics]

Originally Posted by DC2R

Yeah I have these in stock backup housing:

Ah, OK- well, those backup bulbs are not actually going to be drawing much power, they're probably slightly less bright than our middle option there. Any of the LEDs we offer would certainly add light overall. Let me know if you have any other questions. Thanks!

[hahaman86]

Can't do the pre-order special AND get free domestic shipping can we?

[Diode Dynamics]

Originally Posted by hahaman86

Can't do the pre-order special AND get free domestic shipping can we?

No, sorry- can't stack discounts on our site.

[DarkestBuddha]

if i wanted to make the turn signal bulb as a brake light,
what led would i need and what wire would i need to repin/splice

also
if i wanted the turn signal bulb to act the same as the circle LED (on with headlights and bright brake light)
what led would i need and what wire would i need to repin/splice

[Diode Dynamics]

Originally Posted by DarkestBuddha

if i wanted to make the turn signal bulb as a brake light,
what led would i need and what wire would i need to repin/splice

also
if i wanted the turn signal bulb to act the same as the circle LED (on with headlights and bright brake light)
what led would i need and what wire would i need to repin/splice

Yeah, you could easily do either of those things by simply splicing two wires in the module, not too difficult at all. But you'd definitely need to run a red or amber turn signal bulb, as you'll be pulling off the factory tail light power. If you're interested I can explain it further via email or PM. Thanks!