Automatic dual climate control harness

[teotl]

Does anyone have the part # for BRZ Limited dash harness?

[dezmoondo]

i bought the parts over a year ago to do the swap and stopped mid way while making the harness. I remember I am missing one connector and some pins still. Where did most people source out their connectors and pins? I know some go to the junkyard.

[dezmoondo]

@sly is it possible to have the temperature to show for both passenger and driver when doing single temp set up?

[DustinS]

Originally Posted by dezmoondo

@sly is it possible to have the temperature to show for both passenger and driver when doing single temp set up?

On the Climate panel, it shows the temp on both sides that it is set at. As long as the driver side is the only temp switch to be changed, it will change both. If you move the passenger temp switch, it switches to dual mode and nothing will happen. I can get a video if you would like.

[sly]

Originally Posted by dezmoondo

@sly is it possible to have the temperature to show for both passenger and driver when doing single temp set up?

Yes. This is how it normally works. Both sides show the temperature setting and show the same value as long as you don't have the 'dual' toggle selected. Setting dual unlocks the 2 temperature settings so that you can control the driver and passenger side independently. Without 'dual' selected, you just control both sides by the driver's side knob.

[MemphisR]

So what I'm hearing is that there is still no harness that anyone has made that I can buy... I will continue to hold out hope for this.

Sent from my E6883 using Tapatalk

[dezmoondo]

@DustinS @sly
I am glad you guys are still active on the forum. I am trying to be lazy and not even gonna bother wiring a connector for passenger temp sensor and passenger servo.
In the second picture that @sly posted for the single temp set up, I don't see the passenger's temp showing on the display, hence I want to ask if it will work.

[sly]

I'm not sure it it will work or not. The only time it shows one temperature is when defrost is selected. All other settings show 2 temperatures. If 'dual' is selected, the temperatures will be different. If 'dual' is not selected then they both show the same temperature.

If you select defrost, the passenger temp goes blank and you control it with the driver temp knob only.

[lextrueno]

Originally Posted by MemphisR

So what I'm hearing is that there is still no harness that anyone has made that I can buy... I will continue to hold out hope for this.

Sent from my E6883 using Tapatalk

I have time now to sit down and start working on making multiple harnesses. I first have to go and build one for myself. But once that is done I will be sure to message you when I have a solid product.

[Sosa]

Originally Posted by lextrueno

I have time now to sit down and start working on making multiple harnesses. I first have to go and build one for myself. But once that is done I will be sure to message you when I have a solid product.

Looking forward to an update!

Sent from my SM-G935W8 using Tapatalk

[FRSToyota86]

Originally Posted by Chaetagnath

Most of the important information is already in this thread leading up to the single temp install. With the posted PDF files, the info for dual is there now too. ......

Did you all the engine coolant or just topped off whatever leaked out?

Thank you.

[FRSToyota86]

Originally Posted by teotl

Does anyone have the part # for BRZ Limited dash harness?

I purchased a BRZ limited Dash harness, thinking it would have most connectors, but there were only 3 connectors on there that fit. Basically it was a money thrown in garbage and a learning experience since returns were not accepted.

I ended up using connectors that I ordered.

[Chaetagnath]

Originally Posted by FRSToyota86

Did you all the engine coolant or just topped off whatever leaked out?

Thank you.

Just topped it off.

[Chaetagnath]

Originally Posted by FRSToyota86

Did you all the engine coolant or just topped off whatever leaked out?

Thank you.

Just topped it off.