Perrin Exhaust Owners - Page 3 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

BuffDriver · 08-27-2017, 01:44 AM

I have a mixed system of 2.5 OP and Mid then 3.0 catbac and it sounds awesome and not too loud at all.
Running OFT Stg2 E85 custom.

Have ordered a FT86 SpeedFactory Catted UEL and might do a vid n sound for here later

Lunatic · 08-27-2017, 07:47 AM

I had the 3" resonated system and loved the sound, but my neighbors hatted it. And after a year or so it seamed to get louder. I don't know if the Perrin has some kind of packing in it that burned out? But I ended up switching to a Invidia Q 300 to keep peace with the neighbors.

Clark20 · 07-05-2020, 08:53 PM

I just bought a used 2.5 perrin catback but only have the two clamps. Does anyone know if or where I can buy the rest of the hardware to install the exhaust?

Sent from my SM-N960U using Tapatalk

skylinekin · 07-06-2020, 02:39 PM

Quote:

Originally Posted by Clark20

I just bought a used 2.5 perrin catback but only have the two clamps. Does anyone know if or where I can buy the rest of the hardware to install the exhaust?

Sent from my SM-N960U using Tapatalk

Perrin sells the hardware kit, give them a call.

BigTuna · 07-06-2020, 02:59 PM

Quote:

Originally Posted by Clark20

I just bought a used 2.5 perrin catback but only have the two clamps. Does anyone know if or where I can buy the rest of the hardware to install the exhaust?

Sent from my SM-N960U using Tapatalk

You're referring to the V-bands? The other hardware can be bought anywhere, but as mentioned Perrin does sell them.
2 bolts
2 nuts
4 washers (locking if you prefer)
1 2.5", 2-bolt gasket.

Clark20 · 07-06-2020, 03:07 PM

Just got a quote from Perrin about the hardware kit. They quoted me $80/which includes shipping. Wouldn't it just be cheaper to find everything at my local home depot or Lowes? Or should I buy the hardware directly from perrin for the $80? I already have the two v band clamps.

Sent from my SM-N960U using Tapatalk

norcalpb · 07-06-2020, 03:50 PM

Quote:

Originally Posted by Clark20

Just got a quote from Perrin about the hardware kit. They quoted me $80/which includes shipping. Wouldn't it just be cheaper to find everything at my local home depot or Lowes? Or should I buy the hardware directly from perrin for the $80? I already have the two v band clamps.

Sent from my SM-N960U using Tapatalk

Yes, I’d get everything at the hardware store and order a 2.5” 2 hole vibrant gasket.

Clark20 · 07-08-2020, 11:17 AM

Quote:

Originally Posted by norcalpb

Yes, I’d get everything at the hardware store and order a 2.5” 2 hole vibrant gasket.

Would this be the correct bolt for the midpipe to the stock fp connection? https://www.homedepot.com/p/Everbilt...0508/202836080

norcalpb · 07-08-2020, 11:30 AM

Quote:

Originally Posted by Clark20

Would this be the correct bolt for the midpipe to the stock fp connection? https://www.homedepot.com/p/Everbilt...0508/202836080

Correct!

Here are the other M8 parts you need:

(2) M8 x40 Hex head bolt (You found)
(2) M8 Nuts
(2) M8 washers

08-27-2017, 01:44 AM	#29
BuffDriver Member Join Date: Oct 2016 Drives: 2016 Subaru BRZ Location: Houston area, Texas Posts: 66 Thanks: 13 Thanked 41 Times in 22 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	I have a mixed system of 2.5 OP and Mid then 3.0 catbac and it sounds awesome and not too loud at all. Running OFT Stg2 E85 custom. Have ordered a FT86 SpeedFactory Catted UEL and might do a vid n sound for here later __________________ Edelbrock SC kit w/ ECUtek tune, Oil Cooler, UEL catted header, Perrin 2.5 Overpipe n Catted midpipe, 3.0 Catback resonated (all exhst ceramic coated), TRD short shifter, MTEC clutch n trans springs, Trans: Pentosin MTF2, Diff: Motul 75W90, Whiteline trans bushing, 3/4" clutch slave cyl., Ferodo DS2500 pads w/Motul 600 fluid, 17x8 wheels n 235/45ZR-17 tires

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Perrin owners...	Varelco	Engine, Exhaust, Transmission	16	09-11-2015 05:53 PM
FS: Perrin CAI, & Perrin 2.5" resonated exhaust (NC)	sonnydelight	Engine, Exhaust, Bolt-Ons	9	06-08-2015 11:09 AM
FS: Perrin 3in Catback Exhaust, Perrin 3in Front Pipe, Perrin Overpipe SOLD	johnb831	Engine, Exhaust, Bolt-Ons	13	05-21-2015 05:27 PM
Any srt exhaust owners here running headers to go with your exhaust?	Astroboy	Engine, Exhaust, Transmission	10	12-18-2013 09:33 PM
To all Perrin exhaust owners	Tylub	Engine, Exhaust, Transmission	52	08-12-2013 11:06 AM

08-27-2017, 07:47 AM	#30
Lunatic Senior Member Join Date: Jan 2014 Drives: 2015 Raven FRS Location: Indio, CA. Just an Old Fart in a Automatic!. Posts: 1,614 Thanks: 7 Thanked 1,056 Times in 488 Posts Mentioned: 40 Post(s) Tagged: 2 Thread(s)	I had the 3" resonated system and loved the sound, but my neighbors hatted it. And after a year or so it seamed to get louder. I don't know if the Perrin has some kind of packing in it that burned out? But I ended up switching to a Invidia Q 300 to keep peace with the neighbors.

07-05-2020, 08:53 PM	#31
Clark20 Member Join Date: Sep 2019 Drives: 2019 BRZ PP Location: Colorado Posts: 64 Thanks: 10 Thanked 15 Times in 9 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	I just bought a used 2.5 perrin catback but only have the two clamps. Does anyone know if or where I can buy the rest of the hardware to install the exhaust? Sent from my SM-N960U using Tapatalk

07-06-2020, 03:07 PM	#34
Clark20 Member Join Date: Sep 2019 Drives: 2019 BRZ PP Location: Colorado Posts: 64 Thanks: 10 Thanked 15 Times in 9 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Just got a quote from Perrin about the hardware kit. They quoted me $80/which includes shipping. Wouldn't it just be cheaper to find everything at my local home depot or Lowes? Or should I buy the hardware directly from perrin for the $80? I already have the two v band clamps. Sent from my SM-N960U using Tapatalk

User Name		Remember Me?
Password